F1 2019 Extreme & Realistic damage

Misc F1 2019 Extreme & Realistic damage Update 9

Login or Register an account to download this content
hey, what's up StrongestFish?

this will bring to us mechanical failures for the player as the AI drivers?

and about AI hits AI, will damage wings and etc?
 
Does it affect player in any way or only AI? Would vehicle control or on-hit damage be affected? If I set minimal damage within in game settings would it be overwritten by mod's settings?
Is crash frequency also affected by AI difficulty level?
 
Last edited:
1.Does it affect player in any way or only AI? 2.Would vehicle control or on-hit damage be affected? 3. If I set minimal damage within in game settings would it be overwritten by mod's settings?
4.Is crash frequency also affected by AI difficulty level?
1.Equal for AI and player.
2.If front wing damaged, then less downforce, if suspension - DNF.
3.Yes.
4.Yes, less difficulty = less AI aggression and less crashes.

You can just try it. If you doesn't like, then just verify files by Steam and all files will be restored to default.
Right click on game in steam library - properties - local files - verify integrity.
 
Hello there, can anyone confirm if the mod is still working for 1.09? I'm running 100% races and the last 2 races I only had one DNF in each race, when I was normally getting 5-6 each race with the mod
 
Hello there, can anyone confirm if the mod is still working for 1.09? I'm running 100% races and the last 2 races I only had one DNF in each race, when I was normally getting 5-6 each race with the mod
Codemasters didn't change car files in the patch 1.09, so mod still works, but they could reduce AI aggression, like in previous year.
You can reinstall mod to be sure.
 
How to edit damage of wings:
Open xml files for manual install from mod.
Find this lines(realistic):
<F1SuspensionDamage>
<SpeedThreshold value="3.5" />
<FrontDamageScale value="1.00" />
<RearDamageScale value="1.00" />
<WheelDetachScale value="1.000000" />
<PartsDetachScale value="0.75" />
</F1SuspensionDamage>
<F1WingDamage>
<SpeedThreshold value="2" />
<DamageScale value="0.0001" />
<ChassisDamageMultiple value="0.9" />
<SideDetachScale value="0.25" />
<FullDetachScale value="0.5" />

For decrease sensitivity set this number bigger, for example 3, 4 or 5.
<F1WingDamage>
<SpeedThreshold value="2" />

For invulnerable wings set to this:
<F1WingDamage>
<SpeedThreshold value="3" />
<DamageScale value="0.0001" />
<ChassisDamageMultiple value="0.8" />
<SideDetachScale value="1000" />
<FullDetachScale value="1000" />

After this do import xml's like described in tutorial in mod description.
 
How to edit damage of wings:
Open xml files for manual install from mod.
Find this lines(realistic):
<F1SuspensionDamage>
<SpeedThreshold value="3.5" />
<FrontDamageScale value="1.00" />
<RearDamageScale value="1.00" />
<WheelDetachScale value="1.000000" />
<PartsDetachScale value="0.75" />
</F1SuspensionDamage>
<F1WingDamage>
<SpeedThreshold value="2" />
<DamageScale value="0.0001" />
<ChassisDamageMultiple value="0.9" />
<SideDetachScale value="0.25" />
<FullDetachScale value="0.5" />

For decrease sensitivity set this number bigger, for example 3, 4 or 5.
<F1WingDamage>
<SpeedThreshold value="2" />

For invulnerable wings set to this:
<F1WingDamage>
<SpeedThreshold value="3" />
<DamageScale value="0.0001" />
<ChassisDamageMultiple value="0.8" />
<SideDetachScale value="1000" />
<FullDetachScale value="1000" />

After this do import xml's like described in tutorial in mod description.
Any link explaining how to edit xlm? I`ve got ERP ARCHIVER but I can't do it with that
 
Any link explaining how to edit xlm? I`ve got ERP ARCHIVER but I can't do it with that
Read manual installation instruction under spoiler on the description page of this mod.
Editing exported xml's from mod - import into erp's - save - done.
Mercedes xml should be imported in each team erp instead of Mercedes.vtf.xml which located there.
 
Read manual installation instruction under spoiler on the description page of this mod.
Editing exported xml's from mod - import into erp's - save - done.
Mercedes xml should be imported in each team erp instead of Mercedes.vtf.xml which located there.
Yeah I know that but what I want to change are the values of the damage inside your xml files for change sensitivity
 

Latest News

What are you racing this weekend

  • Oval

    Votes: 35 5.4%
  • Road Course

    Votes: 312 48.3%
  • Fantasy track

    Votes: 27 4.2%
  • Free roaming

    Votes: 87 13.5%
  • Drifting

    Votes: 62 9.6%
  • Not racing but trucking

    Votes: 15 2.3%
  • Not racing but flying

    Votes: 6 0.9%
  • Not racing at all

    Votes: 63 9.8%
  • Something else i want to brag about

    Votes: 39 6.0%
Back
Top