Apps Download removed [Deleted]

[Wotever]

Ok. Just tried the game again and it crashed on the outlap as expected. I ran it with the detected hardware open and nothing changed in it while driving.

Here's a link to a shaky mobile footage of the dash. It crashes just as I crash on track: https://drive.google.com/open?id=0B5JZoSh2AvvPVTY3eVdfWFBBQmM

Can't remember if I asked you but I think you should try with stock config, as I can see on the video (it's really pixelated) all is still working OK (refresh rate is still updating),so i'm pretty sure something is wrong with the config.

 

[David Meek]

Also. Thinking of switching to the hdmi monitor and go 21st century with this. On that waveshare website they have different size monitors. I assume I can use any size?

 

[Wotever]

Also. Thinking of switching to the hdmi monitor and go 21st century with this. On that waveshare website they have different size monitors. I assume I can use any size?

Yep any size with a real HDMI port.

 

[David Meek]

Cool. I'll try with the standard config and see if it makes any changes.

Also wired up a new Nano to see if that helps. But I'll probably go HDMI sometime soon.

 

[David Meek]

I believe I have found the problem. I've swapped the Arduino and it has now been working ok all night.

 

[Wotever]

I believe I have found the problem. I've swapped the Arduino and it has now been working ok all night.

Oh nooo ! So much investigations .. happy that it was a hardware problem because i was sincerely desesperate

 

[David Meek]

Yeah I'm glad it was too! Sorry if I put you through any stress trying to figure it out.

(But just so you know, I still can't get it to auto start with windows despite the option being ticked. Assume it's something my end still but never seen that happen.)

 

[Wotever]

Yeah I'm glad it was too! Sorry if I put you through any stress trying to figure it out.

(But just so you know, I still can't get it to auto start with windows despite the option being ticked. Assume it's something my end still but never seen that happen.)

Have you tried simply to check / uncheck it ?

 

[David Meek]

Yeah. didn't make a difference. Also tried to disable and then put a shortcut in the startup folder. Still no difference

It's no biggie really.

 

[manc0ntr0]

And the power its via USB?

Wotever may answer better than I can, but I think so. In the videos and pictures, you can see both HDMI and USB cables

 

[Davinium]

Hey, I have some issues and I can't get my TM1638 to work, maybe you could help. I'm trying to use a Teensy++ board and while everything works fine with other "test" sketches, I can't seem to get it to show up in SimHub. I set up DisplayClient and everything, but there's nothing under Arduino Display "Detected Hardware". I can get games connected but it doesn't seem to recognize my module. I don't think I missed a step in setting things up. Can SimHub work with this board? Am I doing something wrong? Any help would be appreciated.

Board is Teensy++ 2.0 and module is JY-MCU V1.2. I tried with the previous version and with SimHub 5.0

 

[Wotever]

Hey, I have some issues and I can't get my TM1638 to work, maybe you could help. I'm trying to use a Teensy++ board and while everything works fine with other "test" sketches, I can't seem to get it to show up in SimHub. I set up DisplayClient and everything, but there's nothing under Arduino Display "Detected Hardware". I can get games connected but it doesn't seem to recognize my module. I don't think I missed a step in setting things up. Can SimHub work with this board? Am I doing something wrong? Any help would be appreciated.

Board is Teensy++ 2.0 and module is JY-MCU V1.2. I tried with the previous version and with SimHub 5.0

I've never tested with a teensie v2 , but I have optimised a bit each library for faster display and I don't think it's compatible with something else than arduino. Do you see something in the log files ?

 

[Wotever]

Motec Display Creator vs SimHub Dash Studio

 

[Michael1980]

can you add the "additional" 8 push buttons.
i can't find these (mine) in the mapping picker.

ps. your software is awesome

 

[Wotever]

can you add the "additional" 8 push buttons.
i can't find these (mine) in the mapping picker.

ps. your software is awesome

Hi ! Have you tried to simply press them in mapping picker ? They should pop and be automatically selected.

 

[Michael1980]

yes and no
i find the buttons only in keybord emulator mappings

 

[manc0ntr0]

As far as I know, Arduino IDE is able to load sketches to Teensy if you load several files to it. I have one with buttons, rotary encoders and axis and works very fine, even better than an Arduino because is more powerful.

I never tried to conect a TM with it anyway but I think it should work.
I assume that IDE is not showing any errors in the log.

 

[manc0ntr0]

yes and no
i find the buttons only in keybord emulator mappings

If the emulator detects and shows what device and button are you pressing, the mapping picker should detect it too.
I configured several buttons in G25 shifter and it did it without any problem, I pushed the desired button and Simhub detected it.

 

[Michael1980]

I know and other HID devices works fine.
In version 3.01.1b the additional buttons are detected but now with 5.0 it doesn't work

 

[Wotever]

I know and other HID devices works fine.
In version 3.01.1b the additional buttons are detected but now with 5.0 it doesn't work

Wired up my nano, indeed the picker does not want to refresh the list, I'm investigating