Apps Download removed [Deleted]

[Wotever]

Yeah sure thing. I'll do it tomorrow now.

Out of curiosity, when you go back on that page on sim hub should the devices be there straight away or is there a delay in them popping up? I've noticed that when going on the page it takes a second for the device to show.

At first start it can take a couple of second of loading but after that if i remember well the state is refreshed every second.

 

[Erik van Dijk]

Pcars does not give such data sorry

Hi thanks for the reply.

I use the android or ios app: pcars dash also, and this one is give the qualification ranking and times of riders. So I thought it is possible to filter the best times of other drivers also.

 

[Wotever]

[

Hi thanks for the reply.

I use the android or ios app: pcars dash also, and this one is give the qualification ranking and times of riders. So I thought it is possible to filter the best times of other drivers also.

PCars gives UDP data; I guess it's stored in it. I use shared memory, I checked it again I've not seen such data.

 

[manc0ntr0]

Wotever updated SimHub, DIY Sim racing Dash with a new update entry:

Happy Easter !



Read the rest of this update entry...

Hi!
I see you talking about this screens a few days ago and I want to ask you for the best option since you mentioned another brand instead of Nextion. Don't remember the name now. (I'm looking for something similar to WRC dashes, not too big)

And other question, since I have 2 nano, is it possible to Simhub make them work separated? TM is in a closed box with its own nano and I'll prefer to have another independent module.
I know there is an option to 'multi usb' but I'm not completely sure

 

[Wotever]

Hi man.

Is it yours the video from youtube


Hi!
I see you talking about this screens a few days ago and I want to ask you for the best option since you mentioned another brand instead of Nextion. Don't remember the name now.

And other question, since I have 2 nano, is it possible to Simhub make them work separated? TM is in a closed box with its own nano and I'll prefer to have another independent module.
I know there is an option to 'multi usb' but I'm not completely sure

Hi for the screens, this one seems a good option: http://www.waveshare.com/wiki/7inch_HDMI_LCD_(B) it can be found with different brands and it's cheap , Its a simple HDMI screen so you can take whatever you want.

for the two nanos yes it's possible just give them a diffrent name when creating the sketches and you're done :
Set them in simhub with the good parameters and check multi usb :

 

[manc0ntr0]

Hi for the screens, this one seems a good option: http://www.waveshare.com/wiki/7inch_HDMI_LCD_(B) it can be found with different brands and it's cheap , Its a simple HDMI screen so you can take whatever you want.

for the two nanos yes it's possible just give them a diffrent name when creating the sketches and you're done :
Set them in simhub with the good parameters and check multi usb :
View attachment 185469

Thanks! I didn't remember that brand.

Sorry for my lack of acknowledge but if it's HDMI, it means that Arduino is not necessary or I have to wire it anyway?

 

[Wotever]

Thanks! I didn't remember that brand.

Sorry for my lack of acknowledge but if it's HDMI, it means that Arduino is not necessary or I have to wire it anyway?

Ah noo ! no arduino, no wiring ! You can test it right now if you have two screens or if you run your game in windowed mode

 

[manc0ntr0]

Ah noo ! no arduino, no wiring ! You can test it right now if you have two screens or if you run your game in windowed mode

Oh, that's very good news. I love electronics but this makes things much easier.
Of course, I want to have 'old looking' things like the TM module but, yeah, for sure it will be very friendly to make it work.

Very very good work Wotever, this app gets better every time you do an update.

 

[Angus94]

i'd like to try and make this but i have no idea on the exact parts list, your post is a bit confusing, i understand that part will be different depending on the supplier, but a basic list of what's needed would be a good start, for me anyway

 

[gigioconio]

Oh, that's very good news. I love electronics but this makes things much easier.
Of course, I want to have 'old looking' things like the TM module but, yeah, for sure it will be very friendly to make it work.

Very very good work Wotever, this app gets better every time you do an update.

And the power its via USB?

 

[Wotever]

i'd like to try and make this but i have no idea on the exact parts list, your post is a bit confusing, i understand that part will be different depending on the supplier, but a basic list of what's needed would be a good start, for me anyway

Hi ! It's a bit confusing because there is no "official" list, SimHub purpose is to allow you to choose the parts YOU want
Basically SimHub supports 3 different kinds of harware :

• Arduino based, the most basic but still useful setup would be a single TM1638
  • What You will need
    • TM1638 : http://www.ebay.fr/itm/8-bit-7-segm...olor-LED-Arduino-TM1638-CP02025-/282082069337
    • Arduino nano v3 :http://www.dx.com/fr/p/nano-v3-0-co...icial-arduino-boards-blue-383407#.WO8QeNLyiUk
    • And some dupont lines cable to wire it UP
  • Here a nice How to :
• ON Screen based : Fresh from this night,new Dash Studio plugin allows you to create a on screen dash targetting little hdmi displays such as these
  • 5" http://www.dx.com/fr/p/5-inch-hdmi-...PpafJwcmghN3J3PulXGdCRoCQpnw_wcB#.WO8SNdLyiUk
  • 7" http://www.dx.com/fr/p/waveshare-7i...y-pi-banana-pro-banana-bb-408384#.WO8SWdLyiUk
  • ... or any display you can connect on your computer.
  • Howto : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Dash-Studio
    
  
  
• Nextion based : Nextion are smart LCDs
  • What you will need
    • Nextion LCD : NX4827K043 or NX3224K028 (2.8" or 4.3") Availabe here: https://www.itead.cc/display/nextion.html
    • One USB UART per display : http://www.ebay.fr/itm/Convertisseu...763731?hash=item3d371eb293:g:NtAAAOSw3xJVdIHA
  • Here two nice How to :
    • 4.3 full display :
    • 2.8 Gear indicator : https://www.youtube.com/watch?v=_TFFnpNbkSU
  • Downsides : Nextion customisation is the most complex of all the possibilities but it can work easily.

Hope it helps you

 

[the steeg]

Hi ! Just tested, except I messed with x64/x86, it works fine when the plugins are in the right folder. Are you sure you 've made a "plugins" subfolder ? Here my directory structure :

View attachment 185075

Mines in the same folder structure and gives me notification every time I start ETS2, I just need to hook up a display now

 

[Torkelino]

Wotever, I like your new version.

Great work as ever.

I´ll test it and I´m sure I have a lot of questions. ;-)

 

[Wotever]

Wotever, I like your new version.

Great work as ever.

I´ll test it and I´m sure I have a lot of questions. ;-)

Your feedback are welcome ! I've been working really hard on the new plugin, and to fix lot of small stuffs under the hood, hope you will like it.

 

[Angus94]

Hi ! It's a bit confusing because there is no "official" list, SimHub purpose is to allow you to choose the parts YOU want
Basically SimHub supports 3 different kinds of harware :

• Arduino based, the most basic but still useful setup would be a single TM1638
  • What You will need
    • TM1638 : http://www.ebay.fr/itm/8-bit-7-segm...olor-LED-Arduino-TM1638-CP02025-/282082069337
    • Arduino nano v3 :http://www.dx.com/fr/p/nano-v3-0-co...icial-arduino-boards-blue-383407#.WO8QeNLyiUk
    • And some dupont lines cable to wire it UP
  • Here a nice How to :
• ON Screen based : Fresh from this night,new Dash Studio plugin allows you to create a on screen dash targetting little hdmi displays such as these
  • 5" http://www.dx.com/fr/p/5-inch-hdmi-...PpafJwcmghN3J3PulXGdCRoCQpnw_wcB#.WO8SNdLyiUk
  • 7" http://www.dx.com/fr/p/waveshare-7i...y-pi-banana-pro-banana-bb-408384#.WO8SWdLyiUk
  • ... or any display you can connect on your computer.
  • Howto : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Dash-Studio
    
  
  
• Nextion based : Nextion are smart LCDs
  • What you will need
    • Nextion LCD : NX4827K043 or NX3224K028 (2.8" or 4.3") Availabe here: https://www.itead.cc/display/nextion.html
    • One USB UART per display : http://www.ebay.fr/itm/Convertisseu...763731?hash=item3d371eb293:g:NtAAAOSw3xJVdIHA
  • Here two nice How to :
    • 4.3 full display :
    • 2.8 Gear indicator : https://www.youtube.com/watch?v=_TFFnpNbkSU
  • Downsides : Nextion customisation is the most complex of all the possibilities but it can work easily.

Hope it helps you

thanks for your reply and your extended explanations, very helpful.

 

[Chriski]

you use arduino nano and external power supply? can you share the schematics? thank you.
Great project!

Hi gladiorosso.
Thanks for the comment.
Using a Nano (Chinese clone) but no external power supply. Power only from USB. There doesn't seem to be any power problems so far but I have the luminosity set fairly low.
Hope the attached schematic helps and the rear view of the wiring, sorry about the reflection.
The pins on the Nano are the defaults used in the DisplayClient sketch.
The TM1638 modules are daisy chained together. I could have used the supplied ribbon cable but the plugs are a bit bulky so I used short wires instead.
Chris

 

[Torkelino]

And the first question:

The values for ETS2 come over the textitem with a formula. So far so good. But only one value, right?
Means for every value a seperate textitem?

 

[Wotever]

And the first question:

The values for ETS2 come over the textitem with a formula. So far so good. But only one value, right?
Means for every value a seperate textitem?

Direct value binding is simpler, but if you really need to concatenate some values it's possible :
The key is to convert numbers into text using the format function and concatenate the text with '+':

'CPU '+ format([SystemInfoPlugin.CPULoadPercent],'0.0') + '% - MEM ' + format([SystemInfoPlugin.MemoryLoadPercent],'0.0') + '%'

Edit : Do not hesitate to refer to the ncalc doc for advanced usage, all the functions are available on dash studio https://github.com/zegreatclan/AssettoCorsaTools/wiki/NCalc-scripting

Edit 2 :

Format may be skipped in some case (when the formula is text + number + text) but you will not be able to change the value format :

 

[Wotever]

Motec like template is on the road

 

[David Meek]

Ok. Just tried the game again and it crashed on the outlap as expected. I ran it with the detected hardware open and nothing changed in it while driving.

Here's a link to a shaky mobile footage of the dash. It crashes just as I crash on track: https://drive.google.com/open?id=0B5JZoSh2AvvPVTY3eVdfWFBBQmM