Apps Download removed [Deleted]

[badlieutenant007]

the only ones i can see is the idle screen(with working time) ,the printer screen , and the system screen with the go back and vol up and down..

do i need to insert a formated sd card in the display for it to work ?

 

[Andyd358]

Hi just started with this today and having a little problem. Using TM1683 but cant get th 8 LEDS to show the RPM.
Here is the setting I am using:

 

[Wotever]

the only ones i can see is the idle screen(with working time) ,the printer screen , and the system screen with the go back and vol up and down..

do i need to insert a formated sd card in the display for it to work ?

No in theory the other screens will be accessible when in game. what game are you using ? Probably you have not configured it properly and simhub does not detect it.

 

[badlieutenant007]

No in theory the other screens will be accessible when in game. what game are you using ? Probably you have not configured it properly and simhub does not detect it.

i tested your theory and yes the sound bars work when i load lets say dirt rally , but still i dont see the home alt menu and there is where the log shows the error the home alt menu has the rpm bar and for some reason it doenst find the library for the rpm bar to load it , also the other menus still dont show no laphistory no telemetry no tyres menu , strang thing is when i compile the menu to the display it gives no errors when compiling also it uploads it without errors , just reuploaded the compiled file back to display but still no rpm bar are speed also same errors in log , what will you perpose now to do next wotever ?

 

[Wotever]

i tested your theory and yes the sound bars work when i load lets say dirt rally , but still i dont see the home alt menu and there is where the log shows the error the home alt menu has the rpm bar and for some reason it doenst find the library for the rpm bar to load it , also the other menus still dont show no laphistory no telemetry no tyres menu , strang thing is when i compile the menu to the display it gives no errors when compiling also it uploads it without errors , just reuploaded the compiled file back to display but still no rpm bar are speed also same errors in log , what will you perpose now to do next wotever ?

Look in the gameplugins folder you have instructions on how to enable telemetry for Codemasters games

 

[badlieutenant007]

good news its working wotever ;-) only thing that troubles me now is i use automobilista and it doenst updated the laptimes not in single race and not in timetrails ,rpm and speed work rpm history also but tyre history also doenst work/updated with game ?

 

[Wotever]

Support for

good news its working wotever ;-) only thing that troubles me now is i use automobilista and it doenst updated the laptimes not in single race and not in timetrails ,rpm and speed work rpm history also but tyre history also doenst work/updated with game ?

Support for rf1 and rf2 are very limited for now but i will work on it soon

 

[David Meek]

Hi Wotever,

I've looked at the documentation but can't seem to work out a few thing and wondering if you could help.

- Action's on events and inputs. What do they do, I can't seem to work out how to activate them.
- Is it possible to have triggers to select certain screens (not just next and previous screens) Such as screen 1, screen 2 etc and this ties up to the multiple screens in the dash editor.

 

[Andyd358]

Awsome software mate, Just donated to you.

 

[David Meek]

Hi again,

Also noticed that when you try to select a second dash with an input it doesn't stay, it just flashes for a second.

EDIT - Oh wait I might know why! I had it set to idle screen.

 

[badlieutenant007]

Support for

Support for rf1 and rf2 are very limited for now but i will work on it soon

i hope i will thats why i bought all this ;-) thx wotever for your work !!!

 

[Wotever]

Hi again,

Also noticed that when you try to select a second dash with an input it doesn't stay, it just flashes for a second.

EDIT - Oh wait I might know why! I had it set to idle screen.

Yep i have to fix the flashing it shouldn't even try to display it

 

[badlieutenant007]

watever can i change the codemaster port in simhub config file or in the simhub menu , because i also have a revburner and that works only with the simdash prog on port 20780 if i set 20777 in simdash for dirt rally then my revburner doenst work , can i change the 20777 in simbub somewhere ?

 

[Wotever]

Hi Wotever,

I've looked at the documentation but can't seem to work out a few thing and wondering if you could help.

- Action's on events and inputs. What do they do, I can't seem to work out how to activate them.
- Is it possible to have triggers to select certain screens (not just next and previous screens) Such as screen 1, screen 2 etc and this ties up to the multiple screens in the dash editor.

The actions are intended to be used with widgets in a widget you can have multiple screens and if you set an action you make them change so you can have sort of sub screens ie you have a main dash and you can change only a little part. Look on the widget properties to map them

For the events yes i have to reimplement the concept of temporary screen switch like nextion.. it's a bit complex but i will add it

 

[Wotever]

watever can i change the codemaster port in simhub config file or in the simhub menu , because i also have a revburner and that works only with the simdash prog on port 20780 if i set 20777 in simdash for dirt rally then my revburner doenst work , can i change the 20777 in simbub somewhere ?

Erf ;( i had planned it but i can't remember if i already did it. Look i. Simhubwpf.config if there is something.

 

[Wotever]

Awsome software mate, Just donated to you.

Thanks a lot !

 

[badlieutenant007]

there is not wotever , i looked there before ;-) , there is my problem i know for sure if i can alter the port number also dirty rally would work to simhub , can it be elsewhere?

 

[Wotever]

there is not wotever , i looked there before ;-) , there is my problem i know for sure if i can alter also dirty rally would work to simhub , can it be elsewhere?

Of it's not in config file I've still not made it I'll look when I'm back to home this evening my code is already ready for port selection it's not a big deal

 

[badlieutenant007]

bring it on boy , laptimes working in ams + port selection , ooh and maybe what i wonder about is in ams you can have i think its a map plugin where you can see cars in dots on the map that would be so great to have on the nextion display in a race..

 

[Andyd358]

Still cant get the LEDs to work on my TM1638. Must be something I am doing wrong. Could anybody help with some instruction on mapping the the LEDs. The TM1638 I am using has only Red LEDS on it.