Authorised Vendor Thanos AMC-AASD15A 6axis Servo Motion Controller
- Thread starter Tronicgr_6DOF
- Start date
Stevie_007
Premium
this has made my week,
Thanks for restoring this, very much.
I'm going to replace the whole servo power cable and compare EMI noise between that and the conductive tape method.
Its good to be back.
About the 2DOF cockpit above. My understanding is that such a method does not feel realistic, due to the lack of g force. For example, in a real fighter, you do not feel the sensation of hanging upside down. or leaning over 90 degrees for extended periods. I've read some threads by those with lots of motion experience, that with VR, you just need a " suggestion of movement" which I hope my SFX will be able to do. I keep hearing that without real g forces, that less is more when it comes to sims? For example, a roll simulation with be accomplished by a quick tilt to the side, then a gentle "unnoticed" return to center to reset for the next movement.
So I replaced the power cable on one of my servos. EMI noise is almost gone.
See the video (beware it shows ALL steps replacing the cable). Where to cut, how to join new wires, short circuit test, powered motor test and EMI measurements.
And some photos that show better the colors of the wiring:
The shielded power cable I used is from Ebay (no affiliation whatsoever):
Thanks
Thanos
See the video (beware it shows ALL steps replacing the cable). Where to cut, how to join new wires, short circuit test, powered motor test and EMI measurements.
And some photos that show better the colors of the wiring:
The shielded power cable I used is from Ebay (no affiliation whatsoever):
50 FT FEET 18/4 AWG SHIELDED STRANDED CABLE CNC 3D PRINTER Xcarve Shapeoko Nema | eBay
Find many great new & used options and get the best deals for 50 FT FEET 18/4 AWG SHIELDED STRANDED CABLE CNC 3D PRINTER Xcarve Shapeoko Nema at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Thanks
Thanos
Last edited:
If you just need to see the EMI measurements check out this shorter clip:
I'm wondering if we can specify from the sellers on Aliexpress, that we want shielded cable.
I'm asking to see. Also, I posted this in the other thread for the SFX100:
Just an FYI to people ordering the Servos and Driver. They're on sale for 11/11 at Aliexpress at multiple vendors.
Master Jiang (this is the one recommended by the SFX100 team):
www.aliexpress.com
Supericreate (cheapest option, including shipping):
www.aliexpress.com
Steady CNC Machine (second cheapest option, including shipping):
www.aliexpress.com
I'm asking to see. Also, I posted this in the other thread for the SFX100:
Just an FYI to people ordering the Servos and Driver. They're on sale for 11/11 at Aliexpress at multiple vendors.
Master Jiang (this is the one recommended by the SFX100 team):
90ST-M02430 220V 750W AC Servo motor 3000RPM 2,4 N.M. 0,75 KW servomotor Single-Phase ac stick permanent magnet Abgestimmt Fahrer - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
Supericreate (cheapest option, including shipping):
209.0US $ |220V 750W 90ST M02430 AC Servo motor 3000RPM 2.4 N.M. 0.75KW servomotor Single Phase ac drive permanent magnet Matched Driver|AC Motor| - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
Steady CNC Machine (second cheapest option, including shipping):
90ST-M02430 750W 220V AC servo motor driver kit 90mm 3000rpm 2,4 N.m spiel fahrer AASD-15A permanent magnet - AliExpress 13
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
I'm wondering if we can specify from the sellers on Aliexpress, that we want shielded cable.
I'm asking to see. Also, I posted this in the other thread for the SFX100:
Just an FYI to people ordering the Servos and Driver. They're on sale for 11/11 at Aliexpress at multiple vendors.
Master Jiang (this is the one recommended by the SFX100 team):
90ST-M02430 220V 750W AC Servo motor 3000RPM 2,4 N.M. 0,75 KW servomotor Single-Phase ac stick permanent magnet Abgestimmt Fahrer - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
Supericreate (cheapest option, including shipping):
209.0US $ |220V 750W 90ST M02430 AC Servo motor 3000RPM 2.4 N.M. 0.75KW servomotor Single Phase ac drive permanent magnet Matched Driver|AC Motor| - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
Steady CNC Machine (second cheapest option, including shipping):
90ST-M02430 750W 220V AC servo motor driver kit 90mm 3000rpm 2,4 N.m spiel fahrer AASD-15A permanent magnet - AliExpress 13
Smarter Shopping, Better Living! Aliexpress.com
You could ask them, but these are just sellers, you would have to convince the Servo Manufacturer to use shielded power cable in newly made servos.
If it's an issue that people keep having, it's to everyone's benefit. I've asked and will let you know what they say.
Last edited:
I'm not sure which European standard corresponds the 18AWG wires on the suggested cable I got here (USA seller):
50 FT FEET 18/4 AWG SHIELDED STRANDED CABLE CNC 3D PRINTER Xcarve Shapeoko Nema | eBay
Find many great new & used options and get the best deals for 50 FT FEET 18/4 AWG SHIELDED STRANDED CABLE CNC 3D PRINTER Xcarve Shapeoko Nema at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Perhaps Google a unit converter for that.
FlyPT Mover now has specific output module for AMC controllers. Its under test...
.
Last edited:
.
Last edited:
