old threads merged

Status
Not open for further replies.
Very nice. A long anticipated one this is. First shots where available a long time ago, and looked very nice already.

Some additional info:
Some special thanks and credits;
Manfred Jahn, for the FSX C47/DC3 license of usage and model optimization for rF2.
Ethone, for the AIW editing
Luc Van Camp and Michael Borda, for the priceless help
Mike Cantwell, for the nice Dunsfold picture package who helped my finding some good details....
smile.png


Actually I'm getting a solid 60fps with my aged HD6870 and forcing a Standard 8x Adaptive Multisampling AA (the setting I used for screenshots) on the CCC.
All settings are maxed out except for shadows blur turned off. The HDR profile is called Aggressive Clear. I hope something will change for the incar light histogram, because as it is now is almost impossible to get a good view with HDR for non-OW cars. I tried to compensate the problem managing both gamma and autoexposure for daylights, this helps a bit but the massive overexposure on cockpit view are still there.

I hope you'll enjoy the track.


Some driving tips:

tgcorners.jpg


TURN 1 (Crooner Curve) - 3/4th gear for slow cars, 5th gear for racing/GT/supercars

The first turn is barely a turn at all, although it sometimes demands a dab on the brakes to stop you piling into the next corner too quickly.

TURN 2 (Willson) - 4th gear for slow cars, 3th gear for racing/GT/supercars

The first proper turn on the track, ad the first corner you usually see on TV when Stig's lapping a car. Don't let the bump on the way in unsettle the car, and let it run wide on the way out.

TURN 3 (Chicago) - 3/4th gear for slow cars, 2th gear for racing/GT/supercars

It's hard on the brakes and around the tyre wall. Designed by the big brains at Lotus, this is what they call a "steady state corner", designed to sniff out under-steer or over-steer in badly setup chassis.

TURN 4 (Hammerhead) - 3/4th gear for slow cars, 2th gear for racing/GT/supercars

It's very hard on the brakes for a left and right flick through here. Go in too fast and you'll get horrible understeer. And remember not to jump back on the throttle too soon or you'll make a mess of the exit.

TURN 5 (Follow Through) - 5th gear for slow cars, 4th gear for racing/GT/supercars

You can really open the taps for this sweeping right-hander.

TURN 6 (Bentley) - 4th gear for slow cars, 5th gear for racing/GT/supercars

At the end of Follow Through comes this full throttle jink between the tyres and the grass. GO in tight to the apex and brace yourself as the car thumps hard over the worn-way join at the end of the tarmac.

TURN 7 (Bacharach) - 4th gear for slow cars, 3th gear for racing/GT/supercars

Go hard on the brakes again and try to get your line right as you drive into the second to last corner. It is easy to lose it here.


TURN 8 (Gambon) - 4th gear for slow cars, 2/3th gear for racing/GT/supercars

Get on the brakes again and flick it in for the last corner. It's easy to get a car drifting here (someone almost flipped lol).

PIT LANE;

To get the pit you've to go straight on the main runway, missing the Bacharach turn, until the last red/white plastic barrier at the end of the Runway, and turn to the left in the main pitlane.
TOP GEAR - DUNSFOLD TRACK - WIP 2012 by Entropyxel

Will upload the track to the Download section tonight (does not work from my current connection.).
 
Awesome car to drive, very good job from ISI. I have those 2 same problems, braking and corner exit...mind sharing your setup please? :redface: :)


Didnt save it. :(

Basically It was something like this:
- Brake bias-> more to the front to "fix" the braking
- Rear anti-roll bar ->detached (cure for corner exit oversteer)
- Rear toe in -> increase to about 0.45 ? (cure for corner exit oversteer)
- Spring rate -> Soften quite bit. Its not necessary but I did it anyhow. ;)

Here is good guide for setting up a car-> http://diy-racetuning.net/Forza-Motorsport-4/DIY-troubleshooting.html
 
Didnt save it. :(

Basically It was something like this:
- Brake bias-> more to the front to "fix" the braking
- Rear anti-roll bar ->detached (cure for corner exit oversteer)
- Rear toe in -> increase to about 0.45 ? (cure for corner exit oversteer)
- Spring rate -> Soften quite bit. Its not necessary but I did it anyhow. ;)

Here is good guide for setting up a car-> http://diy-racetuning.net/Forza-Motorsport-4/DIY-troubleshooting.html

Your tips worked! So much faster now, thanks! ;)
 
Status
Not open for further replies.

Latest News

Do you prefer licensed hardware?

  • Yes for me it is vital

  • Yes, but only if it's a manufacturer I like

  • Yes, but only if the price is right

  • No, a generic wheel is fine

  • No, I would be ok with a replica


Results are only viewable after voting.
Back
Top