an update will come after Gateway raceDo you plan to adjust the mod to the 1.5 physics?
Content Manager isnt totally compatible with our mods, to be sure isnt the mod the problem, try JSMGE first with new boot file, if still persist let us knowI hope this is something simple. I just got the latest update and now this mod will not work. In fact, the game only gets to the Reiza splash screen and stops. I have to shut down the game myself. I am using the Content Manager so I know it is not a bootfile issue. Any ideas?
Make sure you have the newest version of Content Manager - should work fine. If problem persists - uninstall all other mods and try this mod on it's own to rule out other stuff causing problems. I installed it again today with the Content Manager and it works fine, fwiw.I hope this is something simple. I just got the latest update and now this mod will not work. In fact, the game only gets to the Reiza splash screen and stops. I have to shut down the game myself. I am using the Content Manager so I know it is not a bootfile issue. Any ideas?
You will only see one per livery driver at any given track - but there are alternate ones swapped in automatically at different track types. E.g. road courses/ovals/super speedways. You can change the default for each track type yourself if you wanted to - but it involves some editing of files outside the game - there's some info about it in the readme files iirc.Hi I'm new to Ams2 and just downloaded the mod. When I go to the livery selection for the cars I only see 1 per driver (for example I see 1 New garden, 1 Mclaughlin, and 1 Power). How do I change that?
Ahh okay. Thanks!Make sure you have the newest version of Content Manager - should work fine. If problem persists - uninstall all other mods and try this mod on it's own to rule out other stuff causing problems. I installed it again today with the Content Manager and it works fine, fwiw.
You will only see one per livery driver at any given track - but there are alternate ones swapped in automatically at different track types. E.g. road courses/ovals/super speedways. You can change the default for each track type yourself if you wanted to - but it involves some editing of files outside the game - there's some info about it in the readme files iirc.
Are you planning to make your mod compatible for the content manager?Content Manager isnt totally compatible with our mods, to be sure isnt the mod the problem, try JSMGE first with new boot file, if still persist let us know
It is compatible with it and more or less always has been. Make sure you have the latest version of AMS2CM - it's listed as tested and working on their download page.Are you planning to make your mod compatible for the content manager?
It's the boost binding, iirc. It only works during a race (not test day/practice/quali), and not on the first lap.Hi guys, can’t figure out how to enable push to pass. When I try to keybind either boost or ERS/DRS to my G920 absolutely nothing happen. Thanks for your help.
Thanks for your reply Jusk - just want to make sure I do this right - how would I download and set this up so that AMS2 CM will finish the installation successfully?It is compatible with it and more or less always has been. Make sure you have the latest version of AMS2CM - it's listed as tested and working on their download page.
Basically you just need to download the latest version of AMS2CM (from here) and follow their install instructions. Then run AMS2CM just drag and drop the entire IndyCar mod download onto the AMS2CM GUI (it will copy the mod to the appropriate place automatically), then click 'Apply'. There are no extra/special steps required for this mod.Thanks for your reply Jusk - just want to make sure I do this right - how would I download and set this up so that AMS2 CM will finish the installation successfully?
Thanks so much Jusk - that appears to have worked.Basically you just need to download the latest version of AMS2CM (from here) and follow their install instructions. Then run AMS2CM just drag and drop the entire IndyCar mod download onto the AMS2CM GUI (it will copy the mod to the appropriate place automatically), then click 'Apply'. There are no extra/special steps required for this mod.
Oh my god, waiting this new from months before... thought that the mod was cancelled... thank you so much for your hard work.... !!!Stay tune everyone, we are working hardly to the next update, the short oval version, with some 3d tweak, helmet lid and other stuff