Apps Download removed [Deleted]

[rd.king]

Hi ! Sorry for the late answer, i've seen your previous message but, i forgot
Could you tell me if you see a property called "[AfterburnerPlugin.GPU1.GPU_temperature_Degrees]" in the following list ?
View attachment 245245
this is the property I used in the dash. Afterburner properties names are dynamic depending of what after burner sends so it may change depending the system.

No it does not show that name.
I'm at work now, but as I recall it has the name AfterburnerConnected designated "false"

I just thought that being in Canada I was posting at off hour and getting lost in the other questions

 

[Lukastrop]

My own settings are highly focused on road vibration (dirt is sleeping all the time so wheel slip and lock are irrelevant), would it fit your needs ?

yes of course, please screenshot

 

[PWIstuDio]

Ah I see classic error you need to remove the backup files out of the folder, you have a copy of the sketch in the same folder and the compiler tries to use it causing this crash

you mean i should delete the displayclientv2.ino.cpp file in the temp folder?
appdata/local/temp

 

[Wotever]

you mean i should delete the displayclientv2.ino.cpp file in the temp folder?
appdata/local/temp

From the log i see this file :
C:\Program Files (x86)\SimHub\_Addons\Arduino\DisplayClientV2\DisplayClientV2 - Kopie.ino, it should be removed to allow a compilation

 

[amoari]

hi, its supported a 7 inch nextion?

Thx

Big screen doesn't make it any better.
It may be obscured by the handle (wheel) and therefore not easily visible.
Positioning is important.

 

[VoyXDentro]

hello Wotever
I need to use more digital inputs. In the "sketch setup" configuration, it only allows 8 digital inputs for the "additional buttons" option.

I'm using nano arduino and I want to use the analog inputs to add buttons. With this I can avoid an arduino mega.

The problem that I have with the arduino mega is that I can not use all the digital inputs, so "I cut the creation".

I'm making a button to put behind the wheel g25-27 and a new steering wheel and I need all possible inputs including the analog for the arduino nano or to use the 50 digital inputs of the arduin mega.

How can it be done?
Can I place A1, A2, A3 to use the analog inputs to add buttons to the arduino nano?
Editing the code, if I add the digital inputs, does the simhub take it?

These are questions and tests that I did without success.

I made the donation because you really deserve it. It's a very good job!
Thank you!

 

[Wotever]

hello Wotever
I need to use more digital inputs. In the "sketch setup" configuration, it only allows 8 digital inputs for the "additional buttons" option.

I'm using nano arduino and I want to use the analog inputs to add buttons. With this I can avoid an arduino mega.

The problem that I have with the arduino mega is that I can not use all the digital inputs, so "I cut the creation".

I'm making a button to put behind the wheel g25-27 and a new steering wheel and I need all possible inputs including the analog for the arduino nano or to use the 50 digital inputs of the arduin mega.

How can it be done?
Can I place A1, A2, A3 to use the analog inputs to add buttons to the arduino nano?
Editing the code, if I add the digital inputs, does the simhub take it?

These are questions and tests that I did without success.

I made the donation because you really deserve it. It's a very good job!
Thank you!

Thnaks a lot for your donation !

concerning the digital pins, basically analog pins can act as digital too as this schematics shows :
if you use 14,15 .... in the simhub setup you will be able to use them :

To add more buttons it's possible, I explained it while ago here : http://www.racedepartment.com/threads/simhub-diy-sim-racing-dash.121578/page-77#post-2587568
It shows how to add a 9th button , but there is no theorical limit.

 

[PWIstuDio]

From the log i see this file :
C:\Program Files (x86)\SimHub\_Addons\Arduino\DisplayClientV2\DisplayClientV2 - Kopie.ino, it should be removed to allow a compilation

much better - but still not great

*****************************************

Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"

C:\Program Files (x86)\SimHub\_Addons\Arduino\DisplayClientV2\DisplayClientV2.ino:66:28: fatal error: FlowSerialRead.h: No such file or directory

#include "FlowSerialRead.h"

^

compilation terminated.
*****************************************

 

[Wotever]

much better - but still not great

*****************************************

Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"

C:\Program Files (x86)\SimHub\_Addons\Arduino\DisplayClientV2\DisplayClientV2.ino:66:28: fatal error: FlowSerialRead.h: No such file or directory

#include "FlowSerialRead.h"

^

compilation terminated.
*****************************************

Looks like this time you removed too much files this time
Here the two files : https://drive.google.com/file/d/1_No73K2VmKYsitGXNo_3tzx7I26rT0ZY/view?usp=sharing

 

[PWIstuDio]

i have a big DELTE bottow on my keyboard

compile done - shake now running via simhub

 

[PWIstuDio]

now i will deep dive simhub
is there a handy overview - especially all things i can use for Oculus based racing - beside this amazing shake-it

 

[Wotever]

yes of course, please screenshot

Here we go, so i use only left/right vibration :

I use a very low gamma to remove most of the effect and have something more quiet.

 

[Joukka73]

Hi Wotever
I update simhub 6.3.5 to 6.3.7 and software freezes and debug mode get this error
ERROR First chance exception errorSystem.IO.FileNotFoundException: Unable to find the specified file.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
i full uninstall software and license but no help, version 6.3.5 works fine.

 

[Wotever]

Hi Wotever
I update simhub 6.3.5 to 6.3.7 and software freezes and debug mode get this error
ERROR First chance exception errorSystem.IO.FileNotFoundException: Unable to find the specified file.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
i full uninstall software and license but no help, version 6.3.5 works fine.

Could you give me the full log file ? This error is just a warn

 

[Joukka73]

Is this right log file?

 

[Adsta]

I am hoping that someone, whoever, Wotever , can help me because I've used up my tiny bit of Ncalc knowledge.
This is for a rF2 dash overlay.

I want to display my "optimal" lap time for the session and have it update when a faster sector is done.
I have got the formulas for each sector to display how and what I want:

format([DataCorePlugin.GameData.NewData.Sector1BestTime],'m\\:ss\\:fff')
format([DataCorePlugin.GameData.NewData.Sector2BestTime],'m\\:ss\\:fff')
format([DataCorePlugin.GameData.NewData.Sector3BestTime],'m\\:ss\\:fff')

I now need those three results added together and displayed in the same time format.
I don't if it can't be done, or I just don't know how.
Any assistance would be greatly appreciated.

 

[Wotever]

I am hoping that someone, whoever, Wotever , can help me because I've used up my tiny bit of Ncalc knowledge.
This is for a rF2 dash overlay.

I want to display my "optimal" lap time for the session and have it update when a faster sector is done.
I have got the formulas for each sector to display how and what I want:

format([DataCorePlugin.GameData.NewData.Sector1BestTime],'m\\:ss\\:fff')
format([DataCorePlugin.GameData.NewData.Sector2BestTime],'m\\:ss\\:fff')
format([DataCorePlugin.GameData.NewData.Sector3BestTime],'m\\:ss\\:fff')

I now need those three results added together and displayed in the same time format.
I don't if it can't be done, or I just don't know how.
Any assistance would be greatly appreciated.

This should do the trick

format(
secondstotimespan(
isnull(timespantoseconds([DataCorePlugin.GameData.NewData.Sector1BestTime]),0)
+isnull(timespantoseconds([DataCorePlugin.GameData.NewData.Sector2BestTime]),0)
+isnull(timespantoseconds([DataCorePlugin.GameData.NewData.Sector3BestTime]),0)
),'m\\:ss\\:fff')

 

[Wotever]

Could you give me the full log file ? This error is just a warn

The log doesn't reveal much what's is going on , between these two versions i updated the USBD480 lib to the most recent one coming from LCDINFO, could you try to unplug your screen to see if it's still freezes ? It's not a solution but it may give some clues.

Edit : Could you be a bit more precise on the symptoms i see in the log that you exited so I conclude that everything wasn't freezed ?

 

[Joukka73]

The log doesn't reveal much what's is going on , between these two versions i updated the USBD480 lib to the most recent one coming from LCDINFO, could you try to unplug your screen to see if it's still freezes ? It's not a solution but it may give some clues.

Edit : Could you be a bit more precise on the symptoms i see in the log that you exited so I conclude that everything wasn't freezed ?

Yes,Now it works,i unplug usb lcd screen and use tablet only and then put the screen back and everything works fine. Thank's

 

[Borrer0]

I am trying to use overlays layouts in Rfactor 2 but they remain in background below the game and I do not see them