Misc C13 AEGIS Post Processing Filter 1.89 lite

[anton_Chez]

Make sure you're running the required pure anc csp versions, and reset pure to defaults

Yeah, done all that. Latest version of everything and clicked both Reset Pure AND Reset to defaults and for some reason, those options make zero difference in game, when the first time I installed, I definitely seen changes in the curves when selecting the different ones, I preferred the flat curve.
I'll try deleting and starting again with a fresh copy but I already overwrote once and tried and it seems to make no difference still. It's very odd. For sure I've done something else to cause it, the amount of options available are mind numbing. I've no doubt touched something.

 

[SyCoREAPER]

Make sure you're running the required pure anc csp versions, and reset pure to defaults

I have the exact same issue.

I went back and rechecked the first post and overview but don't see any specific requirements listed.

Gray and glarry

 

[GravityBeats]

Hi, I'm having an issue where the game is super grey and washed out after a clean game install. All was working well and good beforehand. I'm not really sure what to try to fix it.

 

[Ciba1991]

I have the exact same issue.

I went back and rechecked the first post and overview but don't see any specific requirements listed.

Gray and glarry

The update post states requirements as pure 0.238 and CSP 0.2.1

 

[SyCoREAPER]

The update post states requirements as pure 0.238 and CSP 0.2.1

That's what I'm using. So I have no idea why it's washed out

 

[GravityBeats]

The update post states requirements as pure 0.238 and CSP 0.2.1

I'm having the same issue. Latest CSP and Pure. Clean install. Made sure to reset Pure.

 

[Ciba1991]

That's what I'm using. So I have no idea why it's washed out

Got a screenshot of the issue? Same for @GravityBeats

 

[Daniimaiden]

Hello friends, I just saw the latest update but I have a problem with the New Glares profiles... I select any one but it doesn't make any changes
Do I have to install something else?
I would appreciate your help... I like how they look in the photos published in Race Department

 

[Ciba1991]

Hello friends, I just saw the latest update but I have a problem with the New Glares profiles... I select any one but it doesn't make any changes
Do I have to install something else?
I would appreciate your help... I like how they look in the photos published in Race Department

Verify that you are running the latest csp, and try resetting CSP and pure to defaults. If the problem persists, lmk

 

[anton_Chez]

CSP version: 0.2.3-preview1
Pure version: 0.238

 

[SyCoREAPER]

In case it helps, here's an example of what I mean. This disappears if I turn godrays to 0 in Pure's config. Couldn't find any settings within AEGIS that would work.
View attachment 727463

I'm still having this same issue and haven't seen any feedback besides resetting/reinstalling Pure.

On latest Patreon CSP and Pure, reset, reinstalled, still looks like this.

I'm guessing there is some compatibility issue since my other filters work fine.

 

[Ciba1991]

I'm still having this same issue and haven't seen any feedback besides resetting/reinstalling Pure.

On latest Patreon CSP and Pure, reset, reinstalled, still looks like this.

I'm guessing there is some compatibility issue since my other filters work fine.

Please join the C13 Automotive discord if you'd like to troubleshoot this further. A forum is not a very convenient place for this. From the information i have i cannot discern what the cause of the issue is, and other users do not seem to experience this behaviour. So it would help to be in an environment where a rapid exchange of settings and screenshots is possible.

 

[ThePerfumer]

I can't save the settings. If I change with different ppf and back to C13, all settings I've modified before is back to default. How do I save the settings?

 

[Ciba1991]

I can't save the settings. If I change with different ppf and back to C13, all settings I've modified before is back to default. How do I save the settings?

Are you clicking the right save button?

 

[ThePerfumer]

Are you clicking the right save button?View attachment 729624

I did. But still, all the settings are revert back to default.

 

[GravityBeats]

Verify that you are running the latest csp, and try resetting CSP and pure to defaults. If the problem persists, lmk

I have tried reinstalling Pure, resetting, and reinstalling CSP. Also my other filters seem to work just fine. This was shortly after a clean install as well. I was slowly adding my mods back into the game and checking for issues. So far this is the only one I've come across.

 

[SyCoREAPER]

There is clearly something amiss with the filter, even if not consistently. 3 people including myself in the past week with the machting requirements are reporting gray, washed out images.

I'm not giving you a hard time, rather I think it's something that needs to be evaluated if there is some coding issue somewhere

 

[Ciba1991]

View attachment 729833View attachment 729834
I have tried reinstalling Pure, resetting, and reinstalling CSP. Also my other filters seem to work just fine. This was shortly after a clean install as well. I was slowly adding my mods back into the game and checking for issues. So far this is the only one I've come across.

Looks like you've activated alternative post processing in weatherfx

 

[SyCoREAPER]

Either whatever CM just updated fixed it, or it was copying the filter while CM was open (which I find unlikely)

 

[Daniimaiden]

Verify that you are running the latest csp, and try resetting CSP and pure to defaults. If the problem persists, lmk

I am using version 1.80 preview346 that includes the rain Do I have to remove it or buy the most current one?