Apps Download removed [Deleted]

[Andyd358]

how would I tell

I've seen people using some aditionnal tm1638 in order to rewire the leds and do whatever they want. That's easy and painless, a bit of soldering and you're ready.

the display to say light up an LED for a left indicator?

 

[zzy7417]

LFS and dirt needs additional setup have you done it ? Instructions are available in "gameplugins" folder, also dirt3 steam version telemetry is not working, only the gfwl is working sadly (it's a codemasters bug)

okay...so after installing those plugins I've tried LFS and DIRT RALLY(steam)，but still no display,however I've found this tab in hardware settings,so it looks like simhub haven't really detected my STM1638

 

[Wotever]

okay...so after installing those plugins I've tried LFS and DIRT RALLY(steam)，but still no display,however I've found this tab in hardware settings,so it looks like simhub haven't really detected my STM1638

You should check "enable arduino display "

 

[gladiorosso]

Boom !
Working !
https://www.dropbox.com/s/u0hqmosckxtsxtj/HubPackage.5.00.3.rar?dl=0

thank you...i have no word to thank you...thank you again

 

[Andyd358]

Still a work in progress but enjoying the experience

 

[Wotever]

Little competition ! After two days of rewriting each single game plugin ... still 3 remaining to rewrite, R3E ... rfactor1 and rfactor2 ...
If you know good telemetry plugins for rf1/automobilista or rf2 its time to tell it

 

[gladiorosso]

Still a work in progress but enjoying the experience

how you connect TM1638 witch only red led on right ? i try but simhub not recognice this module...i think it recognice only TM1638 witch dual color led...

 

[Vojvoda]

Little competition ! After two days of rewriting each single game plugin ... still 3 remaining to rewrite, R3E ... rfactor1 and rfactor2 ...
If you know good telemetry plugins for rf1/automobilista or rf2 its time to tell it

I think that @infiltrado has knowledge about rF telemetry plugins...

 

[Wotever]

I think that @infiltrado has knowledge about rF telemetry plugins...

I think I will retain CrewChief ones, seems really complete, with a little hope; rfactor will raise from poor support to maximum (With the rewrite i've really tried to focus on data quality, there is great enhancement on almost all games (except pcars and Ac which were well supported) All events, timing etc ... are now working an all major games. And as a bonus I reduced a lot CPU footprint

 

[Andyd358]

how you connect TM1638 witch only red led on right ? i try but simhub not recognice this module...i think it recognice only TM1638 witch dual color led...

have a look http://www.racedepartment.com/threads/simhub-diy-sim-racing-dash.121578/page-27#post-2454446
I basically changed the colour to Green and it worked.

 

[Wotever]

I think I will retain CrewChief ones, seems really complete, with a little hope; rfactor will raise from poor support to maximum (With the rewrite i've really tried to focus on data quality, there is great enhancement on almost all games (except pcars and Ac which were well supported) All events, timing etc ... are now working an all major games. And as a bonus I reduced a lot CPU footprint

Implemented CrewChief plugin for Rf1 works like a champ ! ... still 2 games .... pfiuuu .... so much data Oo ...

 

[Andyd358]

Hi wotever.
Just noticed something today when I went to test Dirt Rally. I cant use ShakeIt, I think its because of the port settings can you use SimHub and ShakIt at the sametime with codemasters?

 

[Wotever]

Hi wotever.
Just noticed something today when I went to test Dirt Rally. I cant use ShakeIt, I think its because of the port settings can you use SimHub and ShakIt at the sametime with codemasters?

Yep, codemasters UDP can only have one listener by port, you can now change the simhub port if required (see game plugins instructions)

 

[Andyd358]

Yep, codemasters UDP can only have one listener by port, you can now change the simhub port if required (see game plugins instructions)

Sorry Think I misunderstood. So the game can only output to one port? meaning that it can only talk to either ShakeIt o Simhub but not both.

 

[Wotever]

Sorry Think I misunderstood. So the game can only output to one port? meaning that it can only talk to either ShakeIt o Simhub but not both.

Nope, you can have two port configured in Codemasters :
<motion_platform>
<dbox enabled="true" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="20777" delay="1" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="20780" delay="1" />
<fanatec enabled="false" pedalVibrationScale="1.0" wheelVibrationScale="1.0" ledTrueForGearsFalseForSpeed="true" />
</motion_platform>

 

[mamaneu]

Hi Wotever
For F1 2016 we can use "two udp ports" aswhell '
Thank you

 

[Andyd358]

Nope, you can have two port configured in Codemasters :
<motion_platform>
<dbox enabled="true" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="20777" delay="1" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="20780" delay="1" />
<fanatec enabled="false" pedalVibrationScale="1.0" wheelVibrationScale="1.0" ledTrueForGearsFalseForSpeed="true" />
</motion_platform>

Still not working Ive added this to the Hardware_settings_config:
<motion_platform>
<dbox enabled="true" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="20778" delay="1" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="20777" delay="1" />
<fanatec enabled="false" pedalVibrationScale="1.0" wheelVibrationScale="1.0" ledTrueForGearsFalseForSpeed="true" />
</motion_platform>

Simhub works but not shake it. Take it im doing something wrong. Dont worry about it though I was just testing it Dont play dirt rally that much mainlt AC, P Cars and ETS2

 

[Andyd358]

Working now I had to turn the settings up in the ShakeIt app

 

[zzy7417]

You should check "enable arduino display "

And that's really working now……and really thanks to you for giving us such an amazing mod! I'll keep exploring

so..is there any multilanguage program on scheduel ? I can provide a ZH_CN version of all those texts in the program though I can't really make it into a script...please let me know if you need so

↓And got a video recorded with real time game capture&camera view
http://www.bilibili.com/video/av10055122/

 

[Wotever]

Working on some data filtering algorythms :
Right is original, left is filtered rpms, it remains responsive but does not suffers of the TC spikes or such things. The data will be more readable as a text/gauge/leds or whatever you want and is more closer to a real dashboard.