Apps Download removed [Deleted]

[danielwrc]

Make an entry for every color:
View attachment 227588[/QUOTE
Many Thanks!! Ready!

 

[danielwrc]

Is it on a particular game ?

Hello Wotever. When starting dashstudio, sometimes my arduino is disconnected, I have arduino one it as unjoytick for button of the cams/levas. Any suggestions to the problem?

 

[Wotever]

Hello Wotever. When starting dashstudio, sometimes my arduino is disconnected, I have arduino one it as unjoytick for button of the cams/levas. Any suggestions to the problem?

Hi ! I'm sorry I've not totally understood, it's an arduino not in use with simhub ? If it's the case you can blacklist the comport : https://github.com/zegreatclan/AssettoCorsaTools/wiki/TroubleShoot-comport-conflicts
By doing this simhub will not scan it.

 

[Erazotropa]

@Wotever

Many questions and requests

To debug (and config any hardware) the recording option is really handy!, is it possible to add a save and load option for it? to playback the recording later on? this for easily testing our hardware?

For everyone, Merry X-Mass to all and your families!. and may 2018 be a new great racing year! :-D

Bjorn aka Erazotropa

 

[Aaqu]

How to fix it?
Arduino mega and lcd ic2
Only two letters can be seen on the LCD. A few months ago it worked

 

[danielwrc]

Hi ! I'm sorry I've not totally understood, it's an arduino not in use with simhub ? If it's the case you can blacklist the comport : https://github.com/zegreatclan/AssettoCorsaTools/wiki/TroubleShoot-comport-conflicts
By doing this simhub will not scan it.

Sorry wotever, my English is bad. I do not have the arduino connected to the SimHub. I use it as a keypad. And it happens that sometimes it disconnects.
I have the arduino uno, to which I have assigned two buttons for the shifters up and down, and these are disconnected.

 

[serugiran1992]

Is it on a particular game ?

In all games. I've found the solution in the facebook SimHub page. I've unistalled SimHub 6.2.2 then I deleted the folders in the following address: "C:\Users\username\AppData\Local\SimHubWPF". Then I reinstalled SimHub 6.2.2. Now It works fine again. Thanks for your quick response. Best regards

 

[Aaqu]

Why not work?

 

[oe2749]

Why not work?

http://www.racedepartment.com/threads/simhub-diy-sim-racing-dash.121578/page-117#post-2649642

 

[Aaqu]

I work LiquidCrystal_I2C- master work thanks

 

[gegewrc]

Hi guys!
Is there any tutorial for creating dashboard from scratch? Because I dont really get how the things work . Editing a existing one is easier but I don't see any existing widget when started from scratch...

Thanks!

 

[Wotever]

Hi guys!
Is there any tutorial for creating dashboard from scratch? Because I dont really get how the things work . Editing a existing one is easier but I don't see any existing widget when started from scratch...

Thanks!

Hi !

I designed Dashstudio to get a result close to a real dash designer (like motec display designer ) that's why "widgets" are not really native in this mind. Basically you have some kind of "primitives" (pictures, gauge, dial, rectangles, text) and you can make them dynamic by using formulas , you can edit my own dash to see how it's made , you can also copy and paste parts from a dash to another (widgets in particular must be copied as files)

Here you have a short introduction how the formulas works to makes everything dynamic : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Dash-Studio---Bindings
Here you can find how formulas are working :
https://github.com/zegreatclan/AssettoCorsaTools/wiki/NCalc-scripting---Introduction

Merry Christmas

.... Flies away for some family Christmas time ...

 

[manc0ntr0]

@Wotever

Many questions and requests

To debug (and config any hardware) the recording option is really handy!, is it possible to add a save and load option for it? to playback the recording later on? this for easily testing our hardware?

For everyone, Merry X-Mass to all and your families!. and may 2018 be a new great racing year! :-D

Bjorn aka Erazotropa

Go to games, select desired game, click play and it should replay the last record you have made of this game, in case you record more than one.

 

[davewilliams000]

Just a quick Christmas present! I've been sitting on this one a few days as it's a busy time and not had chance to upload before now! Presenting my Dash Studio GT3 pack:
http://www.racedepartment.com/downloads/simhub-dash-studio-gt3-dashboard-pack.18845/

Containing dashboards for 4 cars:

Mclaren 650S GT3 (copy of in-game display):


Mercedes AMG GT3 taken from photo of the real car https://i.pinimg.com/originals/9b/5a/46/9b5a467b47cde24ca502b5e93e5b2994.jpg:



Lamborghini Huracan GT3 (can also be used for the R8 as they run the same software by the looks of it) based on this photo: http://image.superstreetonline.com/...2016-lamborghini-huracan-gt3-digital-dash.jpg and a video I found.



Porsche 911 GT3 R (Copy of in-game screen from AC):



Enjoy! Hope everyone has a good Christmas!

 

[RobertGracie]

I found one thing, this application doesnt support ETS2 exactly because I cant seem to get it to work which is an issue for me

UPDATE

It works but I cant get the ETS2 dashboard to work I really wish someone would make a dashboard that works rather than using the Nextion display that I cant figure out!

 

[Steve Bird]

I'm looking at using a 5 inch screen for my rig and was wondering if anybody knows where I can get a bezel made? There's plenty of free 3D printing plans out there on the net but as I don't have a 3D printer I'm a bit stuck. Any ideas?

I found somewhere to get a mount. If anybody else is interested please take a look HERE.

 

[Ensi Ferrum]

Little Teaser:

 

[Ensi Ferrum]

One more:

 

[the steeg]

Hi, there is no minimal amount, donate as you think it is worth it

Hi here.
I run a dual boot.
I want to donate for both OS versions to work.
Do I need to donate 2X or can I use one key on both operating systems?

(ps. Excange rate is bad in my country so it will be minimum donations)

 

[the steeg]

Hi,
It was a wise decision to raise the minimum donation. Shame on those 1 cent people.
It's easily worth more than the raised minimum. (3 euros are more like a "black friday" price

A few days ago I had a question about "rotary switches", it turned out they are not supported.
I use a potentiometer for a selector switch between screens on the display. Much can be done in the arduino code, so I added some lines that now allow me to use the pot as a rotary switch. The greatest part is that it uses only one analog pin on the arduino and can be assigned to even 8 buttons.
My display setup is still not finished, but the buttons now do appear in the SimHub controls panel.
I'm not a programmer, so I was proud I could make it work. In case anyone is interested, here is the code.
It might get supported officially one day. Who knows.

Thank you