Tracks CIRCUIT CHARADE 2023 (csp) 1.3

[Billy Pilgrim]

it's probably something to do with CSP (might need updating) or (what's it called) more likely the cfg file? Or is that the track vao file/track config? something like that... sorry not sure

 

[Please Stop This]

Yes, this was an issue with a previous CustomShadersPatch version, just tested with v0.1.45 and its ok there.

 

[Mark DENNY]

hello
Mark DENNY

you must have something to modify in your assetto corsa file! ?? because you are the only one to have this problem I think, !!! or did you try to modify something on the circuit? is this really my compilation? because I just downloaded it for testing and I don't have the problem ?? and this is not the texture I used at all , sorry

All ive done is downloaded the track version 1.3 and installed it ive done nothing else, it is managed via content manager. I have tried just via AC but the same result.

 

[Mark DENNY]

Yes, this was an issue with a previous CustomShadersPatch version, just tested with v0.1.45 and its ok there.
View attachment 350312

Thanks for your help it was the CSP ive installed 0.1.45 and its working fine now its also fixed the same problem i had with Fuji 68.

 

[Florian43]

When i watch some video on real, i notice than the virtual track is so bumpy....

 

[alexlockout]

why didn’t I know about this track before? I ride all evening, study the track, and I like it more and more ...

 

[MadBrain]

thank you to you, I have to make corrections again on it, they will arrive this year ,,,, if I find the time lol ,,,,, I have resumed sebring to zero ,,,,, I start all over again !!! charade will wait a little longer !! and again thank you ,,,

 

[homecalendar]

Absolutely incredible track. Thank you very much. The only problem is that the ai line in some corners is far from optimal. I tried to fix this using the ai line application, but I ran into the problem that the right border of the track on the start/finish part disappears after saving and the bots are constantly hitting the wall because they do not know the track boundaries.

 

[MadBrain]

thank you very much for your review, but as i pointed out on the post before you i have some corrections to make, it is not really finished and optimize ,,,,, for the moment i have to finish my new version of sebring ,,,
for ai, in the track's data file, there are two small ini files. (side_l.csv and side_r.csv) these are the two files that delimit the border of the track, I created them with the addon "AI line HELPER"
and they must be associated with the ai line, for that you have to press ctrl f4 when loading the track ,,,, when you create a new fast_lane
but I don't know if it works without it, so install the addon ai line helper,

AI Line Helper

Demo Video: AI Lines Extended Tutorial: Partial Side Lines Demo: Extended Tutorial Corrections/Additions/Clarifications 9:30 I should have said “I like the FX17 for recording side lines” 15:50 You don’t need to start recording a fast_lane...

www.racedepartment.com

takes the files of your fast lane and pit lane
and when loading the circuit, press several times on ctrl f4
the boundaries will be reassigned, cars should no longer drive outside the zone
I hope that I managed to make myself understood !!!

 

[homecalendar]

thank you very much for your review, but as i pointed out on the post before you i have some corrections to make, it is not really finished and optimize ,,,,, for the moment i have to finish my new version of sebring ,,,
for ai, in the track's data file, there are two small ini files. (side_l.csv and side_r.csv) these are the two files that delimit the border of the track, I created them with the addon "AI line HELPER"
and they must be associated with the ai line, for that you have to press ctrl f4 when loading the track ,,,, when you create a new fast_lane
but I don't know if it works without it, so install the addon ai line helper,

AI Line Helper

Demo Video: AI Lines Extended Tutorial: Partial Side Lines Demo: Extended Tutorial Corrections/Additions/Clarifications 9:30 I should have said “I like the FX17 for recording side lines” 15:50 You don’t need to start recording a fast_lane...

www.racedepartment.com

takes the files of your fast lane and pit lane
and when loading the circuit, press several times on ctrl f4
the boundaries will be reassigned, cars should no longer drive outside the zone
I hope that I managed to make myself understood !!!

Thanks a lot! So i made new fast line, install ai helper. Than while loading track press several times on ctrl f4 but right border dont appear.

P.S. I found solution. You must hold shift when loading track. If you hold shift borders lines download correctly

 

[Shenmue_X]

This video just made me discover the track

Can't wait for the final version, please keep up the good work.

 

[MaxiRenard]

Hey ! Great job, I love your videos
I wanted to play on Cuircuit de Charade but I don't know how to install it, can you help me please ?

 

[Billy Pilgrim]

Hey ! Great job, I love your videos
I wanted to play on Cuircuit de Charade but I don't know how to install it, can you help me please ?

Mod Installing Tutorial Video

Hello All Quick Video I've put together on installing mods into Assetto Corsa. If you have any questions or if there's anything that isn't clear feel free to reply below. Thank you for watching. Cheers Shawn

www.racedepartment.com

 

[mpowaz]

I just found out about this amazing track! I love the layout and you did such an awesome job! I was running does it support rain fx, wet puddles, night lighting of CSP?

 

[MadBrain]

I just found out about this amazing track! I love the layout and you did such an awesome job! I was running does it support rain fx, wet puddles, night lighting of CSP?

thank you, yes the circuit is nice but far from being really correct, there is too much deformation of the road, there are still plenty of corrections to do on it ,,, and for the effects of wet road and night there is not Again.
must wait

 

[mpowaz]

thank you, yes the circuit is nice but far from being really correct, there is too much deformation of the road, there are still plenty of corrections to do on it ,,, and for the effects of wet road and night there is not Again.
must wait

Are you still working on this track?

 

[MadBrain]

Are you still working on this track?

for the moment i am working on sebring 2021, i got the laserscan from charade, i will try to do something with it ,,,, when i finish sebring

 

[Dethrone1427]

How do you go about making skins for a track? I wouldn't mind making a 60s style skin for this circuit.

 

[MadBrain]

hi Dethrone, for skin you mean texture. ??
objects: building, walls; ?? or from the ground
?

 

[Billy Pilgrim]

How do you go about making skins for a track? I wouldn't mind making a 60s style skin for this circuit.

Two videos seem to answer your question: