Apps proTyres 2.0.0

[Jens Roos]

Great app, except it's not working when I drive the Ginetta G55 GT4 2017 V1.3 (found here)...Grass/dirt buildup and tyre lockup seems to work but tyre temps, pressures and wear/lifespan isn't working. I tested it with other cars and it works fine.

Make sure you have install the ini&lut files for this car found here:
https://www.racedepartment.com/downloads/protyres-ini-lut-pack.18088/

 

[BP]

Make sure you have install the ini&lut files for this car found here:
https://www.racedepartment.com/downloads/protyres-ini-lut-pack.18088/

That worked, thanks!

 

[Andydigital]

Can I please request support for the VRC Bradley (Bentley) Project 8.

https://vrc-modding-team.net/show/24

Thanks

 

[Andydigital]

Thanks for this amazing app and thanks to Jens for adding the VRC Bradley (Bentley) Speed 8.

 

[Jens Roos]

VRC Bradley (Bentley) Project 8 can be downloaded here, will be included in next update as well
https://drive.google.com/drive/folders/1MA31qvGuJWotZJL02rpGYnoYwrxAAiHK

 

[Sandokhanul]

I have a problem with the guerilla mods bmw i240m and running the latest shader patch (above v74). AC crashes few seconds after it is loaded. I tried everything and it only happens when i have protyres enabled.

 

[Jens Roos]

Does the mod car work without proTyres and proTyres works with other cars?
You could attached your log and py_log if it could give any clue of why.

 

[Sandokhanul]

The car works without proTyres. It only crashes with it enabled. It does not happen with other cars (that i know of, i have hundreds, did not try all of them ). Here are my logs if they can offer any insight on this...

 

[Jens Roos]

I have looked at the files and protyres is loading correct:

log
Cleaning Python Cache in path apps/python/proTyres/
Init PyPlugin: proTyres
KGL CREATE FONT segoe ui with locale
Function acUpdate bind to module
Function acShutdown bind to module

pylog
proTyres: Current version 1.5.0, init done
proTyres: Using folder 'apps/python/proTyres/cars/ks_bmw_m235i_racing/'
proTyres: PitBox has been set (FuzzyJump)
proTyres: Trofeo H Slicks compound loaded ok
proTyres: Session position not used
proTyres: Session init (0)


Maybe you could try disable some other apps and/or try run AC and the car using the vanilla launcher.
Several others have noted that sometimes CM do not enable the apps correct, but running vanilla once and then go back to CM fixes the problem.

 

[Sandokhanul]

I have looked at the files and protyres is loading correct:

log
Cleaning Python Cache in path apps/python/proTyres/
Init PyPlugin: proTyres
KGL CREATE FONT segoe ui with locale
Function acUpdate bind to module
Function acShutdown bind to module

pylog
proTyres: Current version 1.5.0, init done
proTyres: Using folder 'apps/python/proTyres/cars/ks_bmw_m235i_racing/'
proTyres: PitBox has been set (FuzzyJump)
proTyres: Trofeo H Slicks compound loaded ok
proTyres: Session position not used
proTyres: Session init (0)


Maybe you could try disable some other apps and/or try run AC and the car using the vanilla launcher.
Several others have noted that sometimes CM do not enable the apps correct, but running vanilla once and then go back to CM fixes the problem.

 

[Sandokhanul]

Thanks. I will try that...

 

[manc0ntr0]

I extracted data.acd of the Fiat X1/9 Dallara and put it where I think they are supposed to be. But it didn't work, the app didn't show the tyres.
Did I do anything wrong? This way worked with other mod cars I have.

 

[Jens Roos]

post your py_log.txt and I take a look at it

 

[BP]

There one or two servers I've connected to for online races where ProTyres didn't work (it's not even on the app list in that server). It works on other servers and always works offline...what could this particular server be missing for ProTyres to disappear? I'm asking so I can tell the server admin what needs to be done.

 

[Jens Roos]

I'm not aware that restriction of user app from server side was possible, can you post or pm me the actual server and I can try it out what happens. If using CM, try launch with vanilla launcher if possible.

 

[manc0ntr0]

post your py_log.txt and I take a look at it

Here it is, it seems to be some error with the .lut files. Maybe I'll try to extract them again

 

[Jens Roos]

It's missing (or failing) the wear lut file: WEAR: apps/python/proTyres/cars_mod/fiat_x19_dallara/_not_set_

Is it the CIRacesonline version, have included that version in the next update:
https://drive.google.com/drive/folders/13kjscR0u3xGMiX6NqltQJoLXVsLwOjlC

 

[manc0ntr0]

Maybe

It's missing (or failing) the wear lut file: WEAR: apps/python/proTyres/cars_mod/fiat_x19_dallara/_not_set_

Is it the CIRacesonline version, have included that version in the next update:
https://drive.google.com/drive/folders/13kjscR0u3xGMiX6NqltQJoLXVsLwOjlC

I don't know who is the author. It's called "1975 Fiat X1-9 Dallara v.1.0b for AC 1.14", maybe the old tyre version is the problem?
I just put your files into my folder and now it works.
Thanks mate!

 

[Jens Roos]

I don't know who is the author. It's called "1975 Fiat X1-9 Dallara v.1.0b for AC 1.14"

Did not look at the details but that version is a bit different it seems, have add that one as well:
https://drive.google.com/drive/folders/1uOCqOPnfgdhryQDRNreFMoGWgMJ9sN3C

 

[manc0ntr0]

Did not look at the details but that version is a bit different it seems, have add that one as well:
https://drive.google.com/drive/folders/1uOCqOPnfgdhryQDRNreFMoGWgMJ9sN3C

Thank you!