Resource icon
Tracks High Force v1.0
- Thread starter Brun
- Start date
For anyone interested, here is a link to the Track Config Builder tutorial:
The config I posted here took 10 mins to do.
Full details and app download:
https://trello.com/b/DqpFvcVb/tcb
Thanks to @Brun for this amazing piece of work.
The config I posted here took 10 mins to do.
Full details and app download:
https://trello.com/b/DqpFvcVb/tcb
Thanks to @Brun for this amazing piece of work.
Can someone please help and do a tutorial for this config builder in German language? I would die to get some knowledge how-to setup configs like these. Currently its a kind of rocket science for me.
As per my review, I could not believe it when I saw that a track had been created that was not far from where I live. I quickly fired it up and could not believe the quality from a 0.1 release!? Wow! I asked my partner to come and have a look and her response was "Wow! Is that not a photograph??" I also asked her is she remembered that little bridge next to Stanhope...
So I took it for a spin and about half way around the track or so there it was! The bridge just past Stanhope where we hit a post about 60mph
My stomach did turn a little I must admit haha
Anyway, I applied the GrassFX from the file included in the download and it appears to work quite well? I'm not sure what the difference is to the one supplied in here afterwards? Also, does the VAO patch that's also included with the download need renaming to work as well?
GrassFX ini included in download.
So I took it for a spin and about half way around the track or so there it was! The bridge just past Stanhope where we hit a post about 60mph
My stomach did turn a little I must admit hahaAnyway, I applied the GrassFX from the file included in the download and it appears to work quite well? I'm not sure what the difference is to the one supplied in here afterwards? Also, does the VAO patch that's also included with the download need renaming to work as well?
GrassFX ini included in download.
After checking that route map...
how about...
Last edited:
These are my local roads i can't wait to try this mod
OK here is an updated config:
- Roadsigns are slightly reflective metallic/shiny
- Roadside cars/vans are slightly reflective metallic/shiny
- Phone boxes have slight orange light (always on) and slight reflective BT signage
- Grass at side of road is now present
- @Blamer - can't find the emissive errors you showed, sorry
- Trees aren't moving, unsure why, yet, but the grass is
- Streetlights are now orange
- All lights have distant emissives (standard Track Config Builder)
- Plus all from before, e.g. seasons, etc.
Config is attached to this post.
- Roadsigns are slightly reflective metallic/shiny
- Roadside cars/vans are slightly reflective metallic/shiny
- Phone boxes have slight orange light (always on) and slight reflective BT signage
- Grass at side of road is now present
- @Blamer - can't find the emissive errors you showed, sorry
- Trees aren't moving, unsure why, yet, but the grass is
- Streetlights are now orange
- All lights have distant emissives (standard Track Config Builder)
- Plus all from before, e.g. seasons, etc.
Config is attached to this post.
Not sure about that, perhaps, haven't investigated.
FYI I can't do the building windows yet because the models contain the frame in addition to the actual glass.
@Blamer - the issue you posted is the VAO patch - I am not using it hence cannot reproduce.
@Brun I can replace with ksTree using my app and will give it a go tomorrow.
FYI I can't do the building windows yet because the models contain the frame in addition to the actual glass.
@Blamer - the issue you posted is the VAO patch - I am not using it hence cannot reproduce.
@Brun I can replace with ksTree using my app and will give it a go tomorrow.
Excellent work @ly993
Thank you!
Thank you!
I'm pretty sure that's why the trees aren't affected by wind. However, you can disable the wind effect on specific meshes in the track config ini:
[WIND]
IGNORE = meshnames? ; disable wind for certain meshes
DYNAMIC_FLAGS = AUTO ; Valid values: NONE, AUTO, or regular mesh filter
TREES_NORMALIZATION = 0.8, 1 ; Stretch trees normalization area so original 0.9 would become 0
GRASS_NORMALIZATION = 0.8, 1 ; Stretch grass normalization area so original 0.9 would become 0
So I wonder if there is a way to activate wind on other meshes as opposed to disabling it? That way it would only take 2 ticks to get them working. Maybe a hidden option in there?
Kstree shader doesn't mess with normals. Only the kstree object naming does that. The tree shader is still preferred as it does not have self shadowing which is needed for y trees.
