Hi, Yes its Davids track,
I spoke with the guys regarding the physics already and everyone is happy on that side of things,
was mainly down to audio slight tweeks and animations and some visual updates and improvements.
Track is insane I love it....
Cars Formula RSS 4 by Race Sim Studio
- Thread starter David Dominguez
- Start date
I spoke with the guys regarding the physics already and everyone is happy on that side of things,
was mainly down to audio slight tweeks and animations and some visual updates and improvements.
Track is insane I love it....
RSS4 2017 V2 Released!
FORMULA RSS 4 UPDATED TO VERSION 2.0
By Race Sim Studio
Our Formula RSS 4 car has been updated to version 2.0, featuring several improvements. An e-mail with the download link will be sent to all the customers of the Formula RSS 4 and Formula Pack 2.
If you don’t own the car yet, you can buy it here.
Thank you for your support and have a good weekend!
FORMULA RSS 4 V2.0 CHANGELOG 08/02/2019
3D:
• UV Mapping fixed rear wing lower beam,
• Updated car shadows
• Optimised the car chassis main LOD / cleaned and reduced geometry by 2k triangles
• New steering column created and applied to the main steering wheel frame, bugged geometry from a past XFORM settings,
• New seat belts added and applied to Cockpit_LR & LOD_B
• New tyre textures created and more blur applied along with new shader settings
• New steering wheel TX gears added as requested, much improved the resoution
• New previews pictures
• Display textures saved again to remove the known .dds bugs we sometimes see in textures,
• New driver animations, much improved over the previous ones, also shift paddle anims updated
• A general overhaul of textures and settings in the LOD_A and lower
• Exported the main car at animation frame 10, to give a better visual appearence in the showroom, car is lower to the ground like ingame
Sounds:
• Overall volume balancing
• Added new effects samples (tyres, bodywork)
• Reduced turbo effects
Other:
• Minor updates to car naming, with short name provided
FORMULA RSS 4 UPDATED TO VERSION 2.0
By Race Sim Studio
Our Formula RSS 4 car has been updated to version 2.0, featuring several improvements. An e-mail with the download link will be sent to all the customers of the Formula RSS 4 and Formula Pack 2.
If you don’t own the car yet, you can buy it here.
Thank you for your support and have a good weekend!
FORMULA RSS 4 V2.0 CHANGELOG 08/02/2019
3D:
• UV Mapping fixed rear wing lower beam,
• Updated car shadows
• Optimised the car chassis main LOD / cleaned and reduced geometry by 2k triangles
• New steering column created and applied to the main steering wheel frame, bugged geometry from a past XFORM settings,
• New seat belts added and applied to Cockpit_LR & LOD_B
• New tyre textures created and more blur applied along with new shader settings
• New steering wheel TX gears added as requested, much improved the resoution
• New previews pictures
• Display textures saved again to remove the known .dds bugs we sometimes see in textures,
• New driver animations, much improved over the previous ones, also shift paddle anims updated
• A general overhaul of textures and settings in the LOD_A and lower
• Exported the main car at animation frame 10, to give a better visual appearence in the showroom, car is lower to the ground like ingame
Sounds:
• Overall volume balancing
• Added new effects samples (tyres, bodywork)
• Reduced turbo effects
Other:
• Minor updates to car naming, with short name provided
Nice to see some love for the 'old' content!
Is there an update planned for the template?
Something went wrong with the exhaust foil texture. IIRC this happed during the development of v1, too.
Davide Nativo
Premium
The tyres look like they are wobbling a lot now when rolling; particularly noticeable when racing AI
Its inside CM, it never deals with alphablend too nice,Nice to see some love for the 'old' content!
Is there an update planned for the template?
Something went wrong with the exhaust foil texture. IIRC this happed during the development of v1, too.
View attachment 290419
its fine ingame I did notice it was there like that but left it, its the prefered shaders I like, CM could do with a update
Thanks Leon,The tyres look like they are wobbling a lot now when rolling; particularly noticeable when racing AI
Yes I do see it there, its strange because the LOD_A on the car I am driving is perfect,
it gets so close to the car a few meters away but yet its still wobbling, obviously should be the LOD_A this close also, ill go check what is happening inside 3ds max.
https://gyazo.com/00f8e93f39f29d15c55f0a5cb61c67d9
Disgaree on the ingame part, as it is very noticeable on darker liveries.Its inside CM, it never deals with alphablend too nice,
its fine ingame I did notice it was there like that but left it, its the prefered shaders I like, CM could do with a update
And this is comparison between v1.0 and v2.0 in CM showroom:
Davide Nativo
Premium
yes it's weird because it doesn't seem to be affecting the player, but it is immediately visible on AI. Glad you could reproduce it
Love this little puppy
Yeah I noticed the shader difference, even when I was rendering some pics for David on the website I noticed it inside CM, I wouldnt have left it if I would have noticed it ingame,
either way Leons discovery is quite serious,
I can only presume it was this way all the time even inside V1.0 the RR wheel wobble,
I just fixed it now so will go and check it ingame, + make the tailpipe cover shield alphatest not alphablend
Yes really sorry about that,yes it's weird because it doesn't seem to be affecting the player, but it is immediately visible on AI. Glad you could reproduce it
Love this little puppy
I checked every mm of everything this LOD_B with the bad wheel there was nothing I touched inside that file,
I simply opened the file and added the new seat belts inside the LOD_B I was there maybe 5 minutes if that and simply saved it again, like I say from what I know I am simply wondering if this bug was there from day 1 the entire RR wheel dummy was rotated strange.
Davide Nativo
Premium
no worries man, if all modders (including those that sell paid mods) would only spot the bugs reported and immediately fix them like you do, this would be an happy island
Thanks for your hard work mate
So anyways the Tailpipe cover and the LOD_B wonky wheel as been rectified,
I highly doubt there will be an official patch, more like a silent update, IDK,
these guys sort these things out in the team,
like I say I can only apologize for the mistake with the wheel,
I will send this patch to the team to inspect.
I highly doubt there will be an official patch, more like a silent update, IDK,
these guys sort these things out in the team,
like I say I can only apologize for the mistake with the wheel,
I will send this patch to the team to inspect.
on the email subject it says: Formula RSS 4 updated to version 3.0
Correct, I'm dumb sorry version is 2.0 obviously.
version is 2.0 obviously.
I don't seem to be getting update emails regarding any of the RSS products I've purchased...hmmm...
HiI don't seem to be getting update emails regarding any of the RSS products I've purchased...hmmm...
Personally I think its because hardly anyone reads descriptions and stuff no more,
I do it myself as well read very little to nothing, I was saying to Ilja last night if I woke up on a morning and read everything I do or use or download, I would just be sat here all day long and get no work done at all,
anyways like I was saying I think its because on average no one is reading much any more,
like here on our Sellfy page for the cars for example,
Here is shows this,
Order now to stay up to date with the latest update packages. We recommend registering to SellFy and making a purchase so you can download an unlimited number of times, and track your purchase!
And making sure these are ticked on the checkout page,
Main thing here not everyone is registering directly with sellfy,
RSS Make products to sell,
Sellfy makes software for businesses to sell there products online,
So how it works is we make content/products and use this Sellfy platform when we sell products to customers its using this software so its important to register directly with Sellfy itself,
when we make updates to content I am sure it sends all the emails to everyone but its not 100% sending to everyone it depends on if you registered and what boxes you ticked on checkout,
I dont see to any of this stuff its the guys in the Team who run the websites and the shop and all social media, I just make the 3D content and visuals for the cars and a few settings in the data whats needed for the visuals ect,
You can email us admin@racesimstudio.com and request a new update,
or send me a PM with the email you used on your purschase and I will forward you a new download for the content you purchased.
I would highly recommend registering with Sellfy though its way simpler I have been told to keep track of your products and updates.
