Ford Sierra Cosworth RS500 Pack

Cars Ford Sierra Cosworth RS500 Pack 3.11

Login or Register an account to download this content
Overview Updates (16) Reviews (111) History Discussion
Great job! Thanks!
There is a good feeling and good physic.
I've made the animation for wippers on the basic model of this car. I work for the other models.
If you want the wiper work, copy the following lines in ext-config.ini. You can find it her ....assettocorsa\content\cars\ford_sierra_cosworth_rs500\extension

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1

[ANIMATED_WIPER_...]
MESHES = rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = rdvorleft_SUB3, rdvorleft_SUB4, rdvorright_SUB3, rdvorright_SUB4, boot_ok_SUB6, boot_ok_SUB5, rdvorleft_SUB1, rdvorleft_SUB0, rdvorright_SUB1, rdvorright_SUB0, boot_ok_SUB1, boot_ok_SUB2, rdvorleft_SUB0, rdvorright_SUB0, boot_ok_SUB1
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorleft_SUB4@A=*', 'rdvorleft_SUB0@A=*', 'rdvorleft_SUB1@A=*', 'rdvorleft_SUB3@A=*'
GROUP_0_ANGLE_FROM = 0.600000
GROUP_0_ANGLE_TO = -77.199997
GROUP_0_AXIS = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_0_END = 0.028897, 0.981443, 0.675538
GROUP_0_PIVOT = -0.576439, 0.942429, 0.734756
GROUP_0_BASE_AXIS = 0.000000, 0.707107, 0.707107
GROUP_0_BASE_PIVOT = -0.576439, 0.942429, 0.734756
GROUP_1 = 'rdvorright_SUB4@A=*', 'rdvorright_SUB1@A=*', 'rdvorright_SUB3@A=*', 'rdvorright_SUB0@A=*'
GROUP_1_ANGLE_TO = -82.099998
GROUP_1_AXIS = 0.000000, 0.707107, 0.707107
GROUP_1_AXIS_OFFSET_0 = -0.061586, 0.863111, 0.501245
GROUP_1_AXIS_OFFSET_1 = -0.061586, 0.863111, 0.501245
GROUP_1_END = 0.587585, 0.967995, 0.630875
GROUP_1_PIVOT = -0.044708, 0.951714, 0.817169
GROUP_1_RUBBER_FROM = 0.066703, 0.958205, 0.723849
GROUP_1_RUBBER_OFFSET_AMOUNT = 0.010100
GROUP_1_RUBBER_OFFSET_EXP = 2.005000
GROUP_1_RUBBER_OFFSET_POS = 0.520000
GROUP_1_RUBBER_TO = 0.586701, 0.962376, 0.628007
GROUP_1_BASE_AXIS = 0.000000, 0.707107, 0.707107
GROUP_1_BASE_PIVOT = -0.044708, 0.951714, 0.817169
GROUP_2 = 'boot_ok_SUB6@A=*', 'boot_ok_SUB2@A=3-5', 'boot_ok_SUB1@A=3,5', 'boot_ok_SUB5@A=3-9,11'
GROUP_2_ANGLE_FROM = 4.300000
GROUP_2_ANGLE_TO = -89.500000
GROUP_2_AXIS = 0.000000, 0.707107, -0.707107
GROUP_2_AXIS_OFFSET_0 = 0.000000, 0.707107, -0.707107
GROUP_2_AXIS_OFFSET_1 = 0.000000, 0.707107, -0.707107
GROUP_2_END = -0.478778, 0.948668, -1.969482
GROUP_2_PIVOT = 0.192047, 0.926628, -2.166443
GROUP_2_SCALE_LUT = '(|-0.002=1.064|0.991=1.057|)'
GROUP_2_BASE_AXIS = 0.000000, 0.707107, -0.707107
GROUP_2_BASE_PIVOT = 0.192047, 0.926628, -2.166443
 
You're welcome ;)
For the drift model.
Copy the following lines in ext-config.ini. You can find it her ....assettocorsa\content\cars\ford_sierra_cosworth_rs500_drift\extension

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1

[ANIMATED_WIPER_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB3@A=*', 'rdvorright_SUB4@A=*', 'wiper_rubber_right1@A=*', 'wiper_rubber_right0@A=2-3', 'wiper_rubber_right2@A=*'
GROUP_0_ANGLE_TO = 83.400002
GROUP_0_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_0_END = -0.595669, 0.908395, 0.825310
GROUP_0_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_0_RUBBER_FROM = -0.073405, 0.911111, 0.899772
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.009500
GROUP_0_RUBBER_OFFSET_POS = 0.504000
GROUP_0_RUBBER_TO = -0.596485, 0.907397, 0.825028
GROUP_0_BASE_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_BASE_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_1 = 'wiper_rubber_left0@A=1,3', 'rdvorleft_SUB4@A=*', 'wiper_rubber_left2@A=1-5,7', 'rdvorleft_SUB3@A=*', 'wiper_rubber_left1@A=*'
GROUP_1_ANGLE_TO = 77.199997
GROUP_1_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_1_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_1_END = -0.032001, 0.939052, 0.861561
GROUP_1_PIVOT = 0.575825, 0.926242, 0.923027
GROUP_1_SCALE_LUT = '(|0.000=1.000|1.004=1.032|)'
GROUP_1_BASE_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_BASE_PIVOT = 0.575825, 0.926242, 0.923027
 
the DTM model

[WIPERS]
FRONT_0=wiper_rubber_1
FRONT_1=
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2

[ANIMATED_WIPER_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB2@A=*', 'rdvorright_SUB1@A=*', 'rdvorright_SUB0@A=*', 'rdvorright_SUB4@A=*', 'rdvorright_SUB3@A=*', 'wiper_rubber_1@A=*'
GROUP_0_ANGLE_FROM = -9.300000
GROUP_0_ANGLE_TO = 59.900002
GROUP_0_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_AXIS_OFFSET_0 = -0.074034, 0.902116, 0.425095
GROUP_0_AXIS_OFFSET_1 = -0.074034, 0.902116, 0.425095
GROUP_0_BENDING_FROM = 0.000000
GROUP_0_BENDING_TO = 0.000000
GROUP_0_END = 0.040615, 1.213572, 0.406586
GROUP_0_PIVOT = -0.008989, 0.912306, 0.993240
GROUP_0_RUBBER_FROM = -0.052998, 0.934456, 0.845660
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.011300
GROUP_0_RUBBER_OFFSET_POS = 0.501000
GROUP_0_RUBBER_TO = 0.045666, 1.214290, 0.398079
GROUP_0_TWIST_FROM = 0.262000
GROUP_0_TWIST_TO = 1.000000
GROUP_0_BASE_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_BASE_PIVOT = -0.008989, 0.912306, 0.993240
 
the rally model

[WIPERS]
FRONT_0=wiper_rubber_left2
FRONT_1=wiper_rubber_right2
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1

[ANIMATED_WIPER_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = wiper_rubber_right2, wiper_rubber_right0, rdvorright_SUB3, rdvorright_SUB4, wiper_rubber_left0, wiper_rubber_left2, rdvorleft_SUB3, rdvorleft_SUB4, wiper_rubber_right1, wiper_rubber_left1
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB3@A=*', 'rdvorright_SUB4@A=*', 'wiper_rubber_right1@A=*', 'wiper_rubber_right0@A=2-3', 'wiper_rubber_right2@A=*'
GROUP_0_ANGLE_TO = 83.400002
GROUP_0_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_0_END = -0.595669, 0.908395, 0.825310
GROUP_0_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_0_RUBBER_FROM = -0.073405, 0.911111, 0.899772
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.011800
GROUP_0_RUBBER_OFFSET_POS = 0.504000
GROUP_0_RUBBER_TO = -0.604965, 0.902618, 0.819839
GROUP_0_BASE_AXIS = -0.091985, 0.795493, 0.598940
GROUP_0_BASE_PIVOT = 0.041658, 0.922155, 0.998878
GROUP_1 = 'wiper_rubber_left0@A=1,3', 'rdvorleft_SUB4@A=*', 'wiper_rubber_left2@A=1-5,7', 'rdvorleft_SUB3@A=*', 'wiper_rubber_left1@A=*'
GROUP_1_ANGLE_TO = 77.199997
GROUP_1_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_1_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_1_END = -0.032001, 0.939052, 0.861561
GROUP_1_PIVOT = 0.575825, 0.926242, 0.923027
GROUP_1_RUBBER_FROM = 0.495503, 0.903212, 0.855376
GROUP_1_RUBBER_OFFSET_AMOUNT = 0.009000
GROUP_1_RUBBER_OFFSET_POS = 0.575724
GROUP_1_RUBBER_TO = -0.037567, 0.925999, 0.850632
GROUP_1_SCALE_LUT = '(|0.000=1.000|1.004=1.032|)'
GROUP_1_BASE_AXIS = -0.016200, 0.851034, 0.524861
GROUP_1_BASE_PIVOT = 0.575825, 0.926242, 0.923027
 
The groupe A model

[WIPERS]
FRONT_0=wiper_rubber_left2
FRONT_1=wiper_rubber_right2
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS]
FRONT_0=wiper_rubber_1
FRONT_1=
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2

[ANIMATED_WIPER_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB2@A=*', 'rdvorright_SUB1@A=*', 'rdvorright_SUB0@A=*', 'rdvorright_SUB4@A=*', 'rdvorright_SUB3@A=*', 'wiper_rubber_1@A=*'
GROUP_0_ANGLE_FROM = -9.300000
GROUP_0_ANGLE_TO = 59.900002
GROUP_0_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_AXIS_OFFSET_0 = -0.074034, 0.902116, 0.425095
GROUP_0_AXIS_OFFSET_1 = -0.074034, 0.902116, 0.425095
GROUP_0_BENDING_FROM = 0.000000
GROUP_0_BENDING_TO = 0.000000
GROUP_0_END = 0.040615, 1.213572, 0.406586
GROUP_0_PIVOT = -0.008989, 0.912306, 0.993240
GROUP_0_RUBBER_FROM = -0.052998, 0.934456, 0.845660
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.011300
GROUP_0_RUBBER_OFFSET_POS = 0.501000
GROUP_0_RUBBER_TO = 0.045666, 1.214290, 0.398079
GROUP_0_TWIST_FROM = 0.262000
GROUP_0_TWIST_TO = 1.000000
GROUP_0_BASE_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_BASE_PIVOT = -0.008989, 0.912306, 0.993240
[WIPERS_TRACE_...]
SURFACE=glass_in
WIPERS=wiper_rubber_left2,wiper_rubber_right2
 
irzult said:
The groupe A model

[WIPERS]
FRONT_0=wiper_rubber_left2
FRONT_1=wiper_rubber_right2
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS]
FRONT_0=wiper_rubber_1
FRONT_1=
WIND_THRESHOLDS_KMH=60,150
WIND_AMPLITUDE_MULT=1
WIND_FREQUENCY_MULT=1
WIND_OFFSET=0.03

[WIPERS_TRACE_...]
SURFACE = glass_out
WIPERS= rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2

[ANIMATED_WIPER_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
DEBUG = 1 ; remove when everything is ready

[MESH_ADJUSTMENT_...]
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
MOVE_TO = modelRoot:y

[BASIC]
DISABLE_WIPER_KSANIM = 1

[ANIMATED_WIPER_0]
DEBUG = 1
MESHES = rdvorright_SUB0, wiper_rubber_1, rdvorright_SUB1, rdvorright_SUB3, rdvorright_SUB4, rdvorright_SUB2
UNDERLYING_SURFACE = glass_out
GROUP_0 = 'rdvorright_SUB2@A=*', 'rdvorright_SUB1@A=*', 'rdvorright_SUB0@A=*', 'rdvorright_SUB4@A=*', 'rdvorright_SUB3@A=*', 'wiper_rubber_1@A=*'
GROUP_0_ANGLE_FROM = -9.300000
GROUP_0_ANGLE_TO = 59.900002
GROUP_0_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_AXIS_OFFSET_0 = -0.074034, 0.902116, 0.425095
GROUP_0_AXIS_OFFSET_1 = -0.074034, 0.902116, 0.425095
GROUP_0_BENDING_FROM = 0.000000
GROUP_0_BENDING_TO = 0.000000
GROUP_0_END = 0.040615, 1.213572, 0.406586
GROUP_0_PIVOT = -0.008989, 0.912306, 0.993240
GROUP_0_RUBBER_FROM = -0.052998, 0.934456, 0.845660
GROUP_0_RUBBER_OFFSET_AMOUNT = 0.011300
GROUP_0_RUBBER_OFFSET_POS = 0.501000
GROUP_0_RUBBER_TO = 0.045666, 1.214290, 0.398079
GROUP_0_TWIST_FROM = 0.262000
GROUP_0_TWIST_TO = 1.000000
GROUP_0_BASE_AXIS = 0.015202, 0.944804, 0.327283
GROUP_0_BASE_PIVOT = -0.008989, 0.912306, 0.993240
[WIPERS_TRACE_...]
SURFACE=glass_in
WIPERS=wiper_rubber_left2,wiper_rubber_right2
Click to expand...
You are legend, Thank you!
 
You must log in or register to reply here.

Top Stories This Month

Racing Club Schedule: November 17 - 24
Misc
Racing Club Schedule: November 17 - 24
Yannik Haustein
Comments
29
Rennsport To Add Aston Martin Vantage AMR GT3 Evo, Second Community Track
Rennsport
Rennsport To Add Aston Martin Vantage AMR GT3 Evo, Second Community Track
Luca Munro
Comments
47
Sim-Lab Direct Drive Wheel Base To Feature Up To 35 Nm
Hardware
Sim-Lab Direct Drive Wheel Base To Feature Up To 35 Nm
Yannik Haustein
Comments
47
Major Nostalgia Hit Times Four: Grand Prix Evolution Mod For Automobilista
Other Games
Major Nostalgia Hit Times Four: Grand Prix Evolution Mod For Automobilista
Yannik Haustein
Comments
43
Assetto Corsa EVO: Free-roaming With Traffic Confirmed
Assetto Corsa Evo
Assetto Corsa EVO: Free-roaming With Traffic Confirmed
Connor Minniss
Comments
67
Marco Massarutto Interview: How Kunos plan to get Assetto Corsa EVO Right
Assetto Corsa Evo
Marco Massarutto Interview: How Kunos plan to get Assetto Corsa EVO Right
Connor Minniss
Comments
69
"It's going to be an amazing time": Aris Vasilakos Shares AC EVO Impressions
Assetto Corsa Evo
"It's going to be an amazing time": Aris Vasilakos Shares AC EVO Impressions
Yannik Haustein
Comments
61
Simagic To Expand Lineup With Highly Customizable Wheel Rims, New Wheel Base & More
Hardware
Simagic To Expand Lineup With Highly Customizable Wheel Rims, New Wheel Base & More
Yannik Haustein
Comments
15
Automobilista 2: Confirmed Cars For Version 1.6
Automobilista 2
Automobilista 2: Confirmed Cars For Version 1.6
Yannik Haustein
Comments
140
First AC EVO Gameplay: Re-watch Our Live Stream
Assetto Corsa Evo
First AC EVO Gameplay: Re-watch Our Live Stream
Luca Munro
Comments
124

Latest News

Do you prefer licensed hardware?

  • Yes for me it is vital

  • Yes, but only if it's a manufacturer I like

  • Yes, but only if the price is right

  • No, a generic wheel is fine

  • No, I would be ok with a replica

Results are only viewable after voting.
See comments…
Back
Top