Apps Download removed [Deleted]

Nunzio · Nov 18, 2017

I feel dumb. I have a working 4.3 x 3 LCD that works with the basic Nextion Dash that works in pCars 2. When I launch Sim Hub and start a dash, it does not show up on my screen. I'm selecting secondary monitor.

Also the dashes are installed in the root folder of sim hub as well as the fonts in the dash folder. I've even installed the fonts to windows?

What am I missing?

kurtimuc · Nov 18, 2017

I tried to run the shake it feature in simhub, but I can't see the "shake it" menu on the left like on screenshots in post #1907.
I set it up in the arduino setup tool:

But I don't see a menu for shake it:

Here is the log, the connection to my devices seems to be fine:

With the "Shake it" stand alone everything was working properly!
What am I doing wrong in simhub or is it caused dueto the BETA status?

Wotever · Nov 18, 2017

kurtimuc said:
I tried to run the shake it feature in simhub, but I can't see the "shake it" menu on the left like on screenshots in post #1907.
I set it up in the arduino setup tool:
View attachment 222798
But I don't see a menu for shake it:
View attachment 222799
Here is the log, the connection to my devices seems to be fine:
View attachment 222800

With the "Shake it" stand alone everything was working properly!
What am I doing wrong in simhub or is it caused dueto the BETA status?

Hi ! Simply go into the settings/ plugins and enable the shakeit plugin

capsolo · Nov 18, 2017

Wotever said:
Sadly this setting is not available yet, i will look if i can do something

I just found out that the matrix syncs with this parameter for the leds!

Phil Jeff · Nov 18, 2017

Hi Wotever,

Will these work with Simhub? https://www.amazon.co.uk/HALJIA-Ser...UTF8&qid=1511026763&sr=8-204&keywords=arduino

Wotever · Nov 18, 2017

Phil Jeff said:
Hi Wotever,

Will these work with Simhub? https://www.amazon.co.uk/HALJIA-Ser...UTF8&qid=1511026763&sr=8-204&keywords=arduino

I only tested the 0.96" model, on the hardware side it should work, but you will need to customize the sketch to get it working. However it is probably really really small

bud101 · Nov 18, 2017

Hi everyone, I downloaded the model package and I noticed a problem ... Brake balance is displayed in reverse .... Starting from a front value of 60 and 40, the rear value and not the front...
Can you edit the file to display the front value?
Thank you all!

Wotever · Nov 18, 2017

bud101 said:
Hi everyone, I downloaded the model package and I noticed a problem ... Brake balance is displayed in reverse .... Starting from a front value of 60 and 40, the rear value and not the front...
Can you edit the file to display the front value?
Thank you all!

Hi ! could you specify the game ?

bud101 · Nov 18, 2017

I’m sorry, raceroom

Wotever · Nov 18, 2017

bud101 said:
I’m sorry, raceroom

Indeed it was a rear bias, other games or front bias, It's fixed for next release

bud101 · Nov 18, 2017

Thank you very much, I forgot about another problem ...
the pitlimiter icon comes into operation by entering the box even if it is not inserted ...
Thanks again!

Wotever · Nov 18, 2017

bud101 said:
Thank you very much, I forgot about another problem ...
the pitlimiter icon comes into operation by entering the box even if it is not inserted ...
Thanks again!

It Depends on which dash you use, but on rre pitlimiter data is correctly fed.

kurtimuc · Nov 18, 2017

Wotever said:
Hi ! Simply go into the settings/ plugins and enable the shakeit plugin

Thanks!
But one more question: I'm using a DK motor shield clone which preforms well in Shakeit but in SimHub the motors will not work. I activated the DK motor shield in the sketch setup and used the same settings in the shakeit menu.

Maybe you have another hint, thanks in advance!

Wotever · Nov 18, 2017

kurtimuc said:
Thanks!
But one more question: I'm using a DK motor shield clone which preforms well in Shakeit but in SimHub the motors will not work. I activated the DK motor shield in the sketch setup and used the same settings in the shakeit menu. Maybe you have another hint, thanks in advance!

I'm definitely guilty, I did not had a DK shield under the hand to test it

. But here is a fixed version

https://drive.google.com/file/d/1IqfSO1XQdQWkcx4MbbWG3m5-a3watW3J/view?usp=sharing

kurtimuc · Nov 18, 2017

Wotever said:
I'm definitely guilty, I did not had a DK shield under the hand to test it . But here is a fixed version
https://drive.google.com/file/d/1IqfSO1XQdQWkcx4MbbWG3m5-a3watW3J/view?usp=sharing

Works

, what a great support!

Nunzio · Nov 19, 2017

I can't get the dash from Sim Hub to work on my Nextion, I don't know what I'm doing wrong? I can get the dash template to work that is in the Nextion templates. Do the sim hub templates auto load or what?

Wotever · Nov 19, 2017

Nunzio said:
I can't get the dash from Sim Hub to work on my Nextion, I don't know what I'm doing wrong? I can get the dash template to work that is in the Nextion templates. Do the sim hub templates auto load or what?

Hi !
Nextion templates are dedicated templates you must upload them using the nextion editor, you can fins the doc here : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Nextion-Display

unsal · Nov 19, 2017

hi.. i want to add a brake and throtle progress bar to your default nextion template.. is it possible?

Majkyy M · Nov 19, 2017

Wotever said:
Hi ! Canbus is definitely very specific for a stock support, however if you're confident with arduino, Simhub offers a basic "custom protocol" support which should be enough to support this kind of dash : https://github.com/zegreatclan/AssettoCorsaTools/wiki/Custom-Arduino-hardware-support

Thanks for link

I'll try to write some code.
I'll write when some functions start wroking