Apps Download removed [Deleted]

[gnokketto]

Working, only the indicator of gear from 10 to 16 show only the second number..
on TMS1638

thanks, I solved in SimHub config display add 1 space..

 

[Aaqu]

How to add 2 LCD 2004 ?

 

[the steeg]

Sadly using the shift register there is only one digit. What would you like to see ?

Well, ets2 and ats has more than 9 hears, so a 2nd digit is import.

Were will I find the digit coding is it binary or the other methods, I want to edit it to add 10 and up.
Im still busy with my HT33k16 pcb. Which uses i2c and will be driving 14segment 2digit led. Thats where im heading shift reg is just temp

 

[drnrd]

Confirmed...Dirt 4 Runs perfectly

Thanks a lot @Wotever

 

[Erik van Dijk]

Hi, Is there a SimHub Property for reading out if ABS, TC, Drs etc is active? i cannot find it anymore in de Arduino Display properties. Kind regards, Erik

 

[Wotever]

Hi, Is there a SimHub Property for reading out if ABS, TC, Drs etc is active? i cannot find it anymore in de Arduino Display properties. Kind regards, Erik

Just check the "advanced" checkbox side to the search bar, I tried to unclutter the list for beginners but it's still available

 

[Erik van Dijk]

Just check the "advanced" checkbox side to the search bar, I tried to unclutter the list for beginners but it's still available

Hi, thanks for the reply! but i can't still find it in the list, before i saw it, but now it is not available! is looked the entire list and also searched for "abs" or "drs". is there a way it may be lost?

 

[Erik van Dijk]

Hi, thanks for the reply! but i can't still find it in the list, before i saw it, but now it is not available! is looked the entire list and also searched for "abs" or "drs". is there a way it may be lost?

 

[Wotever]

Hi, thanks for the reply! but i can't still find it in the list, before i saw it, but now it is not available! is looked the entire list and also searched for "abs" or "drs". is there a way it may be lost?

Where are you searching ? It's maybe a bug

 

[Wotever]

Where are you searching ? It's maybe a bug

Ah ! Ok I've seen the snapshot what game are you using ? The "rawdata" are a direct access to the game specific API so it can vary depending of the game

 

[Erik van Dijk]

Ah ! Ok I've seen the snapshot what game are you using ? The "rawdata" are a direct access to the game specific API so it can vary depending of the game

Project cars

 

[OldNslow]

Along with many others, I think simhub is an awesome product and I'm happy to be a contributor. I am using a number of its modules but I have a question when using nextion. With Assetto corsa or other, is there a way to change the speed from kph to mph on the templates. I apologize for the likely fundamental question but I searched and could not find an answer.

 

[davewilliams000]

Just wanted to show my initial test for my Thrustmaster F1 wheel mod - Here's a video of me testing out my new components to go in the wheel. I'm trying to replicate something similar to the steering wheel display in the RSS Formula Hybrid as I like the layout of the info on the screen in that car. Obviously this is just taped to the wheel at the moment for a proof of concept. Next comes the actual integration into the wheel.

Specs:
Thrustmaster Ferrari F1 Rim
Simhub (obviously!)
Nextion 3.2in display (with TTL to USB adaptor)
Arduino Nano v3
WS2812b LED strip - I will add another strip for a total of 16 LEDs now I know that it works.

I'm planning on making my own custom cable which will essentially be 2 USB cables in 1, with 2 plugs at the end. I'm also going to change the buttons on the wheel for better ones, but haven't decided as yet if I will keep the Thrustmaster PCB or use something else.

As far as the screen goes, I need to change it to MPH, and get the ERS bars working - I'm sure I'll be able to figure out how to do these but if someone wants to point me in the right direction that would help a lot!

Also what's the easiest way to reduce the brightness of the LEDs? - they're a little too strong.

 

[Wotever]

Along with many others, I think simhub is an awesome product and I'm happy to be a contributor. I am using a number of its modules but I have a question when using nextion. With Assetto corsa or other, is there a way to change the speed from kph to mph on the templates. I apologize for the likely fundamental question but I searched and could not find an answer.

I introduced since the last version the "localspeed" where unit can be changed in settings,

Just updated the nextion mapping files to use it
https://www.dropbox.com/s/b4ix947ra3doce2/NextionTemplate.rar?dl=0

Could you confirm that it's ok ? I'm not home and I've no nextion under hand to test , if ok i will include them as default for the next releases

 

[OldNslow]

Hmmm. It's likely something I'm doing wrong but with new mapping file speed does not seem to work at all. I'll look a bit more. Other data seems fine. Lap counter/position that did not work for me previously now seems good.

 

[Wotever]

Hmmm. It's likely something I'm doing wrong but with new mapping file speed does not seem to work at all. I'll look a bit more. Other data seems fine. Lap counter/position that did not work for me previously now seems good.

Ok, I'm back home I will check I keep you in touch

 

[OldNslow]

Hmmm. It's likely something I'm doing wrong but with new mapping file speed does not seem to work at all. I'll look a bit more. Other data seems fine. Lap counter/position that did not work for me previously now seems good.

Well I upgraded to simhub latest version and that got the speed data back. Still seems to be in kph no matter if in settings it is on mph or kph.

 

[Wotever]

Well I upgraded to simhub latest version and that got the speed data back. Still seems to be in kph no matter if in settings it is on mph or kph.

Which game are you using ?

edit : Yes indeed the "local speed" feature came with the latest version.

 

[OldNslow]

Which game are you using ?

edit : Yes indeed the "local speed" feature came with the latest version.

Assetto Corsa

 

[Erik van Dijk]

Project cars

Do i have to start the game first to see the raw data?