Apps Download removed [Deleted]

[Chimaera]

I know the keyboard input plugin isn't recommended, but is there any reason you can think of that it can't see F17-24? I can bind them to my Stream Deck and they show up fine in Javascript testing - they're codes 0x80 (128) through 0x87 (135). However when trying to add a key to change screen pages, pressing those buttons does nothing. Other keys work fine so I know the plugin is active.

 

[Mivec5RS]

Ah indeed I tought the first fan link was dead (invalid certificate). But that would be still the best explanation (does the Amps are wrote on the fan itself ?)
About the voltmeter simply put it in DC mode and plug it on the board instead of the fan, you will be able to read speed proportional values from 0 to 12v.

Ok i got a meter and checked the board.. There seems to be a problem with M1.. I have connected the fans to M2 and M3 and they work fine... I can run them at 100% and no problems.. It looks like the M1 port was getting overloaded.. Is it ok to run it like that??

 

[Smallpoul]

Hi,
if i want to link a button from my thrustmaster t300rs to change the screen of my t1638 display is it possible.
Will be so good to left the hand on the wheel and be able to swap between screen for pertinent info.
Thanks

 

[Wotever]

Ok i got a meter and checked the board.. There seems to be a problem with M1.. I have connected the fans to M2 and M3 and they work fine... I can run them at 100% and no problems.. It looks like the M1 port was getting overloaded.. Is it ok to run it like that??

Arf , so yes m2 and m3 is the best compromise so you will only have one fan per chip.

I know the keyboard input plugin isn't recommended, but is there any reason you can think of that it can't see F17-24? I can bind them to my Stream Deck and they show up fine in Javascript testing - they're codes 0x80 (128) through 0x87 (135). However when trying to add a key to change screen pages, pressing those buttons does nothing. Other keys work fine so I know the plugin is active.

Strange i need to take a look more deeply, the library I use seems to support those keys, at least they are listed.

Hi,
if i want to link a button from my thrustmaster t300rs to change the screen of my t1638 display is it possible.
Will be so good to left the hand on the wheel and be able to swap between screen for pertinent info.
Thanks

You can map all those actions here

 

[Wotever]

Hi Wotever! Thanx for great work, and support Gametrix. I have JetPad with only 2 motors - motor #1 and #6. It's work, but will be good on configuration have two rows for #1 and #6, i.e. add motors by number not as a list, like on screen. Thanks again!

View attachment 299272

Hi ! I'm taking a look to add stock support for the jet pad, could you tell me between 1 and 6 which motors where left or right ?

 

[medioman-ita]

SEGNALA UN PROBLEMA! Quando voglio usare Arduino Uno per shakelt e un arduino nano per la simulazione di led e tastiera su sim hub, non funzionano contemporaneamente, solo uno dei 2 funziona in modo casuale. Questo problema può essere risolto con un aggiornamento? O mi sbaglio?

 

[Wotever]

SEGNALA UN PROBLEMA! Quando voglio usare Arduino Uno per shakelt e un arduino nano per la simulazione di led e tastiera su sim hub, non funzionano contemporaneamente, solo uno dei 2 funziona in modo casuale. Questo problema può essere risolto con un aggiornamento? O mi sbaglio?

Hi ! Make sure to give unique names to your arduino at sketch upload otherwise simhub will be able to only use a single arduino at the same time and to have a clean multiple arduino setup.
You can read the multiple arduino setup guide here : https://github.com/zegreatclan/SimHub/wiki/Arduino-Multiple-devices-support

PS : Make sure to write in english so everyone (including me ) can read your message easily

 

[suraj]

Many thanks bud

 

[evolaco]

How to add leds of limiter pit? And for the flags simply copy for example [DataCorePlugin.GameData.NewData.Flag_White]? I have seen the example with yellow flag and it is like that, but with the pit limiter I copied the DataCorePlugin but it does not work, it is always active

edit if the pit limiter works, I do not know why it went on before but now it's perfect

 

[medioman-ita]

[QUOTE = "Wotever, post: 2945602, membro: 223229"] Ciao! Assicurati di dare nomi univoci al tuo arduino al caricamento degli sketch altrimenti simhub sarà in grado di usare solo un singolo arduino allo stesso tempo e di avere una configurazione multipla pulita di arduino.
Puoi leggere la guida di installazione di più arduino qui: https://github.com/zegreatclan/SimHub/wiki/Arduino-Multiple-devices-support

PS: assicurati di scrivere in inglese in modo che tutti (incluso me ) possano leggere facilmente il tuo messaggio [/ QUOTE]
Grazie 1000. Ci scusiamo per non aver pubblicato in inglese ma da cellulare ho sbagliato a copiare la traduzione

 

[frankditasso]

hello I have a problem with nextion and stroke, on the display everything works correctly except the RPM bar, what could be the problem?
Thanks

 

[evolaco]

hello I have a problem with nextion and stroke, on the display everything works correctly except the RPM bar, what could be the problem?
Thanks

Use your own template?

 

[Smallpoul]

Last thing, let say i want at the end of each lap, see in the tm1638 the time of it for a certain time and then go back to the actual screen is it possible.
thanks again

 

[frankditasso]

Use your own template?

no I use the one provided by the dash 2.8 program

 

[Wotever]

hello I have a problem with nextion and stroke, on the display everything works correctly except the RPM bar, what could be the problem?
Thanks

Hi ! I guess you are using the Butonz templates ? They were tightly fitted as shift leds, I've reviewed all of them to make them more universal as some games/cars will probably not match these values and appear as dead :
You can find them here (it will be released on the next update)
https://www.dropbox.com/s/loptittxxo8ycuv/BuToNz - Nextion Template Pack v1.rar?dl=0

Take care I've also got rid of the old ini files, so you need to use this method to install them :
https://github.com/zegreatclan/SimHub/wiki/Nextion-Display---Installing-an-'editor'-template

 

[Wotever]

Last thing, let say i want at the end of each lap, see in the tm1638 the time of it for a certain time and then go back to the actual screen is it possible.
thanks again

Yes, in "controls and events\events" , you can add an event mapping to trigger a screen for a defined time :

 

[frankditasso]

Yes, in "controls and events\events" , you can add an event mapping to trigger a screen for a defined time :
View attachment 299568
View attachment 299569

hello and thanks now it works correctly

 

[eSEA One]

@Wotever I did a silly thing and went and ordered a 7inch Nextion screen and only after did I look on the simhub wiki that your recommendations are for under 5inch. It was too late to change the order. They said it I should wait till it arrives then send it back.
Anyway my question is - with all the updates you have been doing over the years is Simhub now compatible with the larger screens?
As always Awesome work! so much so I feel I need to make another donation, you deserve it.

 

[Wotever]

@Wotever I did a silly thing and went and ordered a 7inch Nextion screen and only after did I look on the simhub wiki that your recommendations are for under 5inch. It was too late to change the order. They said it I should wait till it arrives then send it back.
Anyway my question is - with all the updates you have been doing over the years is Simhub now compatible with the larger screens?
As always Awesome work! so much so I feel I need to make another donation, you deserve it.

Arf , i'm afraid the limitation does not comes from Simhub but from the screen itself, larger size means higher resolution but the on-board chip is the same and will drive it significantly slower. It will work, but keeping the creation simple and not too "nervous" which defeats the purpose of having a large screen.

 

[eSEA One]

Arf , i'm afraid the limitation does not comes from Simhub but from the screen itself, larger size means higher resolution but the on-board chip is the same and will drive it significantly slower. It will work, but keeping the creation simple and not too "nervous" which defeats the purpose of having a large screen.

Oh well I will have to order the smaller 4.3"one