Apps Download removed [Deleted]

[davewilliams000]

I was going to give another peek at this today, and then I did some more work on it so decided it was ready for release! Presenting my dash studio dashboard pack for the recently released GT mod by Race Sim Studio.

Tornado V12:

The RPM gauge has quite a sharp curve, so is difficult to replicate in Dash Studio. In the end I settled for 6 different linear gauges with images as this was as close as I could get and am happy with the result, especially considering it took about 4.5hrs to make in photoshop

Ferruccio V12 55:

Background created in photoshop. On the 2nd row, I haven't quite figured out what everything is yet. The first zero I don't know, the 2nd is water temp (so will show zero), and not sure what the 'W' is for. Also not sure what the LEDs are (apart from RPM ones).

Vortex V10:
Not done this one yet, it will be completed in a later release.

I'll update once I've figured out the 2nd row of the Ferruccio 55 and when the Vortex dash is done - hopefully soon.

 

[Anatoliy Tkachenko]

Hi @Wotever
I have something to ask. I wanna put some light or word (ON) for PIT limiter.
How can i do in Nextion editor and in ini file for SimHub.
Thanks a lot.

You may look how I made it for rFactor2: https://yadi.sk/d/IHvGrfaz3RBujG
"ON" and "OFF" text as well as light (background, text, border color) depends on both: limiter state and whether the car is on pitlane or not.

 

[Derek44]

hi wot, in the end i edited rf2 overlay tio a minimum surface with only the dash and only another few widgets, i had startlights too but in pitlane they don't work as in trackmap (entering the box they goes on and until pitlane exit), is it normal? they work only in start of the race?

 

[the steeg]

Thank you.
Ill have another look.

As for the time thing.
In ETS2, I setup show job time left, I get a bunch of numbers

Hey Wotever.
Awesome, thanks your example worked.
I must ask, as I dont understand.
Why is there // not / ?
And the ' before and after the url?
What does this mean??


Its freaking awesome, thank you

And any chance of it scrolling??

 

[Ensi Ferrum]

...
I must ask, as I dont understand.
Why is there // not / ?

Escape characters -> https://en.wikipedia.org/wiki/Escape_character

...
And the ' before and after the url?
What does this mean??

String literals -> https://en.wikipedia.org/wiki/String_literal

Here ya go. Learn this well, it's essential in most programming and scripting languages

 

[the steeg]

Escape characters -> https://en.wikipedia.org/wiki/Escape_character


String literals -> https://en.wikipedia.org/wiki/String_literal

Here ya go. Learn this well, it's essential in most programming and scripting languages

Thank you kind sir!!

 

[Wotever]

hi wot, in the end i edited rf2 overlay tio a minimum surface with only the dash and only another few widgets, i had startlights too but in pitlane they don't work as in trackmap (entering the box they goes on and until pitlane exit), is it normal? they work only in start of the race?

So it works correctly now ?

Concerning the starting lights, you should ask to @FinesseSteez, there are thousands of way of doing it, I don't know how he made it, however I guess he use the RF2 start lights data which is related to the race.

 

[Wotever]

Hey Wotever.
Awesome, thanks your example worked.
I must ask, as I dont understand.
Why is there // not / ?
And the ' before and after the url?
What does this mean??


Its freaking awesome, thank you

And any chance of it scrolling??

you can use the scroll function :
Example :
scroll(200,15,'my wonderful scrolling text')

In your case it would give something like that :
scroll(200,15,readtextfile('c:\\temp\\test.txt'))
200 is the delay between each scroll step in ms), 15 is number of characters of the "scroll" zone, and readtext.. is the content.

 

[Ensi Ferrum]

Anyone interested in DTM?

Currently working on a R3E DTM 2016 Dash





Nextion part is nearly done, just recovered a little error.
Next is the fun part of NCalc and JS scripting …..

 

[Erazotropa]

Anyone interested in DTM?
View attachment 229240
Currently working on a R3E DTM 2016 Dash
View attachment 229241 View attachment 229246
View attachment 229242 View attachment 229247
View attachment 229243 View attachment 229248
View attachment 229244 View attachment 229250
View attachment 229245
Nextion part is nearly done, just recovered a little error.
Next is the fun part of NCalc and JS scripting …..

What Nextion display(s) will you be supporting?

 

[Ensi Ferrum]

4.3"
Best size IMHO

 

[Erazotropa]

4.3"
Best size IMHO

Excellent, can't wait

 

[the steeg]

It looks like it's not exactly disconnects, or to be more precise it does not happens so often :

Line 43: [2018-01-01 22:11:01,333] INFO - Found one device on COM6 named {
Line 63: [2018-01-01 22:12:18,336] INFO - Found one device on COM8 named {
Line 86: [2018-01-01 22:14:04,174] INFO - Found one device on COM6 named {
Line 145: [2018-01-01 22:32:00,623] INFO - Found one device on COM8 named {
Line 184: [2018-01-01 22:40:41,448] INFO - Found one device on COM8 named {
Line 206: [2018-01-01 22:40:50,542] INFO - Found one device on COM8 named {
Line 282: [2018-01-01 22:58:15,948] INFO - Found one device on COM8 named {
Line 304: [2018-01-01 23:03:47,718] INFO - Found one device on COM8 named {
Line 385: [2018-01-01 23:11:24,069] INFO - Found one device on COM8 named {
Line 439: [2018-01-01 23:31:04,244] INFO - Found one device on COM8 named {
Line 459: [2018-01-01 23:33:05,132] INFO - Found one device on COM8 named {
Line 480: [2018-01-01 23:35:17,907] INFO - Found one device on COM8 named {

I agree it is still a lot, but so it's happening at this frequency ?
I think the last version is less tolerant to late responses and the lcd is definitely slow so i guess it could cause it more often. I've made it much more tolerant for the next version.

For the buttons they show up when you map them ? could you give me a bit more details ?

Hey Wotever.

First off!!

Many thanx fpr the help and listening to us all, I really appreciate it, especially as im batteling with this coding for some reason.

Anyway, my lcd capt on flashing and Shakeit vibes still not working correctly.
So I Uninstalled it all again, this time installed the older shake it and seperate simhub.
Recoded everything and test, well ive been on ets2 for nearly 2 hours and not one lcd flicker,
Any ideas again? Id really like to use the newest versions, but as soon as the two are merged I get simhub freezing(which I think is visible when im trying to press buttons and they unresponsive) I also tjink it locks up my Pc, since using the latest version (version in my txt earlier) project CARs2 freezes just after junning for an hour.

So sorry but im so frustrated, this is an awesome app, but the app doesnt like me

 

[Wotever]

Hey Wotever.

First off!!

Many thanx fpr the help and listening to us all, I really appreciate it, especially as im batteling with this coding for some reason.

Anyway, my lcd capt on flashing and Shakeit vibes still not working correctly.
So I Uninstalled it all again, this time installed the older shake it and seperate simhub.
Recoded everything and test, well ive been on ets2 for nearly 2 hours and not one lcd flicker,
Any ideas again? Id really like to use the newest versions, but as soon as the two are merged I get simhub freezing(which I think is visible when im trying to press buttons and they unresponsive) I also tjink it locks up my Pc, since using the latest version (version in my txt earlier) project CARs2 freezes just after junning for an hour.

So sorry but im so frustrated, this is an awesome app, but the app doesnt like me

I send you a PM with a beta for testing this version is really not ready for public release

 

[the steeg]

I send you a PM with a beta for testing this version is really not ready for public release

You sir are a hero!!
Thanx

 

[Erazotropa]

Anyone tried this with simhub?

https://www.ebay.com/itm/10000rpm-M...ash=item58ffb7a107:g:UG8AAOSwrxdaRMBX&vxp=mtr

https://www.ebay.com/itm/12V-ATV-Motorcycle-LCD-Digital-Dual-Colors-Speedometer-Tachometer-Odometer-Gauge/253222084573?_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20160727114228&meid=57f9f90982d8402685c705ec0b38795e&pid=100290&rk=4&rkt=4&sd=222402956185&_trksid=p2060778.c100290.m3507

 

[dnl0319]

I had the old Shakeit app, but now i switched to the SimHub app but cant get my arduino and my two v2 motorboards running.

I get always the massage: Disconnected, device not configured

I uploaded the sketch from the arduino setup tool but it wont work.

Can someone help me, thanks!

No one has an idea how to fix this problem?

@Wotever ?

 

[Wotever]

No one has an idea how to fix this problem?

@Wotever ?

Hi ! It means that you are using multi usb and that the "device is not declared", to fix it click on "Scan now", simhub should create the two entries for your arduinos, when it's done click on "apply now" and the two arduinos will be connected.

 

[dnl0319]

Hi ! It means that you are using multi usb and that the "device is not declared", to fix it click on "Scan now", simhub should create the two entries for your arduinos, when it's done click on "apply now" and the two arduinos will be connected.

View attachment 229519

actually i got only one arduino... should i really mark "enable mulit usb"?

I did that as you said, but i got this:

 

[Wotever]

actually i got only one arduino... should i really mark "enable mulit usb"?

I did that as you said, but i got this:

In this case simply uncheck "enable multiple usb"