3D Models DonnerTechRacing ECUs 1.6.1
- Thread starter DonnerPlays
- Start date
Hi, I don't understand why I can't have the Tuner page, idk why. That's not really important, but this is normal?
It was removed from the mod
Ok, I didn't see that information on the changelog that why I asked, thx for your response 
Donner, do you think you could put out either a picture of a good base fuel map for us to go off of along with a guide on how to properly tune the car and use the fuel map to its full advantage
Donner, do you think you could put out either a picture of a good base fuel map for us to go off of along with a guide on how to properly tune the car and use the fuel map to its full advantage
No. I don't have one
Attachments
For you to make your fuel map. Basically use it as a way to have your fuel ratios right where you would like them depending on your engines speed and your throttle input. The way the game is coded specifically. Leaner if you want more horsepower and richer makes you run more efficiently. If you would like, this site I got my info says 16 is economical while 13.1 is for peak performance and any lower can do serious damage to the vehicle.
my-summer-car.fandom.com
I'd give you my fuel map that I have made but donner likes people figuring it out themselves. its more rewarding that way
This should be enough information for you to make a functional fuel map for your satsuma good luck!!
Tuning
This is a general community written tuning guide to aggregate all the tunable Satsuma parts and give advice on best performing settings Many of the vehicle components can be modified to increase performance or economy of the Satsuma. Some tuning jobs can be easily done by the player, others...
I'd give you my fuel map that I have made but donner likes people figuring it out themselves. its more rewarding that way
This should be enough information for you to make a functional fuel map for your satsuma good luck!!
Last edited:
Hello, I have a problem
some of my parts fell through the map. I have tried reinstalling the mod and even my save game but when I re install the mod and go back to the game the parts are in the exact same place I left them before
do you know a way i can get them back?
some of my parts fell through the map. I have tried reinstalling the mod and even my save game but when I re install the mod and go back to the game the parts are in the exact same place I left them before
do you know a way i can get them back?
if you use the mod loader. there should be an option in the settings of said mod. if that is not working or an option. you can go into the appdata folder. find your game save location and there should be files in there for your game save and any save for your mods in it. mods are finaky
Last edited:
@DonnerPlays Hey so ive tried this mod on both of my computers i installed the turbo mod and then the ecu mod it all loads in i can put everything on but when i do everything in exact order you tell me and make sure its tight i dont get the red wires ive tried for about 5 hours and im pretty tech savvy but i cannot for the life of my figure out why it wont add up.. If you got any suggestions id love it. I can message you and send pictures or even a video maybe that would help but agh its pissing me off hahaha
Last edited:
If you go into the mod settings it can spawn it all back on the desk you got it from
When the wires are not apoearing some part required for the fuel injection is not installed or an original part is still installed that should not be.
there cold be a loose bolt. on the ECU side of things. id go over every screw and nut and make sure they are tightened all the way. you could also search up the tutorial by radex as he has a good demonstration on how to set it up!
@DonnerPlays Hey, I've started installing ECU parts with plate, thats obvious, then modules and wiring, everything bolted, but then I can't install fuel injection system, just nothing wants to be installed. I don't know where's the problem, because everyting from old fuel system is uninstalled (fuel strainer, fuel pump and racing carburettors). Can anybody help me? Wanted to try this mod after few monts of break from MSC
Last edited:
@DonnerPlays Hey, I've started installing ECU parts with plate, thats obvious, then modules and wiring, everything bolted, but then I can't install fuel injection system, just nothing wants to be installed. I don't know where's the problem, because everyting from old fuel system is uninstalled (fuel strainer, fuel pump and racing carburettors). Can anybody help me? Wanted to try this mod after few monts of break from MSC
Last edited:
Distributor too?@DonnerPlays Hey, I've started installing ECU parts with plate, thats obvious, then modules and wiring, everything bolted, but then I can't install fuel injection system, just nothing wants to be installed. I don't know where's the problem, because everyting from old fuel system is uninstalled (fuel strainer, fuel pump and racing carburettors). Can anybody help me? Wanted to try this mod after few monts of break from MSC
@DonnerPlays Okay, so now I see red cables, also changed fuel map (16 everywhere, start assist enabled) but car doesn't start O,o dunno where's the problem.
Spark timing?
