I don't know why in monza I can't see wet asphalt and the smoke behind the car is brown....
do you use CSP + Sol?I don't know why in monza I can't see wet asphalt and the smoke behind the car is brown....
Yes, you are right, thx.Maybe you have the "New smoke and dust" setting active in the "Particle FX" settings?
I set thunderstorm and now the asphalt is wet but is it possible to have wet asphalt with clear weather? For example at spa it is possible, why at Monza not?do you use CSP + Sol?
Then in the very latest Monza track config the water on track amount is working. So you need to set a rainy weather.
Monza for now is the only track where the Sol feature is working. It will dynamically get wet. SO if you have a weather plan with a rainy weather on start and then a dry weather after it, then you will drive on a wet track at dry weather, because the track dries slowly...Yes, you are right, thx.
I set thunderstorm and now the asphalt is wet but is it possible to have wet asphalt with clear weather? For example at spa it is possible, why at Monza not?
You mean that I must setting dynamic weather? From thunderstorm to clear weather.Monza for now is the only track where the Sol feature is working. It will dynamically get wet. SO if you have a weather plan with a rainy weather on start and then a dry weather after it, then you will drive on a wet track at dry weather, because the track dries slowly...
Yes. Or rain to clear. If road and ambient temperatures are low, drying takes longer...You mean that I must setting dynamic weather? From thunderstorm to clear weather.
Be patient, there will be an overall function in CSP in the future.Hello! Can you make a general guide for adding wet layout to a track? I'm especially curious about puddle layer shader configuration.
The installation of both are independent. It does not matter. Also they should not use the same files, or do they interfer on your side?Hey, sorry for asking but does it matter if I install SOL first and then the wet mod? or doesn't it matter? I don't get any spray of the cars? particle is set to "low" because of the recommendation of SOL
solved in way, reinstalled SOL and several patches now it works, but with brown spray :/