Misc ACC-CDS - Complete Dash Set V2.2.2

Ensi Ferrum · Sep 17, 2019

Ensi Ferrum updated ACC-CDS - Complete Dash Set with a new update entry:

Pickin' up the pace

View attachment 324982
This is just a hotfix, service release, call it what you like to.
Fixes:

Mercedes Hardware LEDs

McLaren Delta Laptime

Mismatch between "Next Dash Page", "Previous Dash Page" in SimHub and ACC

Just a few words to the Hardware LEDs:

The RPM LEDs should match the ingame LEDs.

Pitlimiter LEDs should match the ingame LEDs.
Mercedes with it's Christmas tree like pattern does not!
No need to comment on that. It is technically not...

Read the rest of this update entry...

kurtimuc · Sep 17, 2019

Great job and very fast support on the hardware LED issue!

Did some testing on the new version 1.0.9. and "there is one more thing"!

- The hardware LED's on the Lexus RC F GT3 2016 doesn't work at all. Neither the rpm ones nor the pit limiter ones.
- The hardware LED's on the Ferrari 488 GT3 2018 won't blink while overboosting.
- All other hardware LED's for pit limiter and rpm on all the other supported cars seems to work perfectly.

But also your solution for the christmas tree from "Schdurgert" is really well done!
....and the version number on your homescreen is still 1.0.8

So, that is enough of me tonight....THANKS again for your great work

kurtimuc · Sep 18, 2019

Today I did some further evaluation on version 1.0.9 and found the following issues:
- The reverse gear on the display is only shown with the Audi!
- AMG: The Brake Bias is only shown as integer number, but not as decimal number.
- Lexus: Bias does not work.
- Aston: ABS does not work.
- Ferrari: MAP changes PED (which is right) and also MIX (which is not changing in game).

Ensi Ferrum · Sep 19, 2019

kurtimuc said:
[..]
- The hardware LED's on the Lexus RC F GT3 2016 doesn't work at all. Neither the rpm ones nor the pit limiter ones.
- The hardware LED's on the Ferrari 488 GT3 2018 won't blink while overboosting.
[..]

kurtimuc said:
[..]
- The reverse gear on the display is only shown with the Audi!
- AMG: The Brake Bias is only shown as integer number, but not as decimal number.
- Lexus: Bias does not work.
- Aston: ABS does not work.
- Ferrari: MAP changes PED (which is right) and also MIX (which is not changing in game).

Thanks for testing and have such a close look.
Will be corrected in the next version.

2stains · Sep 19, 2019

Ensi Ferrum said:
Thanks for testing and have such a close look.
Will be corrected in the next version.

Any word on race position option ?

Ensi Ferrum · Sep 19, 2019

Should be in the next version as well.

fuztupnz · Sep 19, 2019

I’m having an issue with it loading on iOS devices (safari). It just sits at the loading screen. I’ve tried two iPhones and an iPad, as well as Chrome on the iPad. It does load in an overlay window from SimHub and in Chrome on the host pc. I’ve uninstalled and wiped the directory for both ACC CDS and SimHub. I don’t see any errors in the SimHub logs. Any thoughts?

Ensi Ferrum · Sep 20, 2019

2stains said:
Any word on race position option ?

The logic for the option is already in the code.
Can you please tell me which cars you drive most?
Reason I ask is that the graphics need some time and work to be created and I would like to release the next update later today.

2stains · Sep 20, 2019

Ensi Ferrum said:
The logic for the option is already in the code.
Can you please tell me which cars you drive most?
Reason I ask is that the graphics need some time and work to be created and I would like to release the next update later today.

Hey mate , thanks for replying and doing this

I like to drive all cars but seem to mostly stick to Audi / 991 Cup and Merc .

Ensi Ferrum · Sep 20, 2019

OK, then I add it for Audi, Lamborghini, Porsche and Mercedes.
As I am a bit busy today release is postponed. Maybe tomorrow.

Kianor · Sep 21, 2019

fuztupnz said:
I’m having an issue with it loading on iOS devices (safari). It just sits at the loading screen. I’ve tried two iPhones and an iPad, as well as Chrome on the iPad. It does load in an overlay window from SimHub and in Chrome on the host pc. I’ve uninstalled and wiped the directory for both ACC CDS and SimHub. I don’t see any errors in the SimHub logs. Any thoughts?

got same error. Stuck on loading screen... The same on android tablet...

Ensi Ferrum · Sep 21, 2019

fuztupnz said:
I’m having an issue with it loading on iOS devices (safari). It just sits at the loading screen. I’ve tried two iPhones and an iPad, as well as Chrome on the iPad. It does load in an overlay window from SimHub and in Chrome on the host pc. I’ve uninstalled and wiped the directory for both ACC CDS and SimHub. I don’t see any errors in the SimHub logs. Any thoughts?

Kianor said:
got same error. Stuck on loading screen... The same on android tablet...

Just checked.
Working very well with my Android mobile phone (Huawei Mate 20).
Browser used: Microsoft Edge

Possible solution: Try a different browser.
PS: No support from me for Apple devices as I don't own one and never will.

Kianor · Sep 21, 2019

Ensi Ferrum said:
Just checked.
Working very well with my Android mobile phone (Huawei Mate 20).
Browser used: Microsoft Edge

Possible solution: Try a different browser.
PS: No support from me for Apple devices as I don't own one and never will.

hi there,
that's is very strange: version 0.99 worked very well. I cant get your dashboard working on galaxy tab or ipad or iphone. Stuck on loading screen. Other simhub dashboards work fine...

Ensi Ferrum · Sep 21, 2019

Then this troubleshooting guide from Wotever might come helpfull:
https://github.com/SHWotever/SimHub/wiki/Troubleshoot-Dashstudio-Web-access

Ensi Ferrum · Sep 21, 2019

Ensi Ferrum updated ACC-CDS - Complete Dash Set with a new update entry:

Last Hotfix

View attachment 325555

Just a little hotfix:

- The reverse gear on the display is now shown in all cars
- Mercedes-AMG GT3 2015: Brake Bias is now a decimal number.
- Lexus RC F GT3 2016: Bias is now working.
- Lexus RC F GT3 2016: Hardware LED's now work (Some guy forgot to connect them)
- Aston Martin V12 Vantage GT3 2013: ABS now works.
- Ferrari 488 GT3 2018: MAP now only changes PED.
- Ferrari 488 GT3 2018: Hardware LED's now blink while overboosting (Same guy as above -> guy...

Read the rest of this update entry...

kurtimuc · Sep 21, 2019

Sorry, me again!

Unfortunately, the last version 1.0.10 does not work at all, it stays on the black homescreen when starting ACC (I mean, if you sit in the car). In addition, it will be displayed in Simhub as version 1.0.9. It looks as if there would be no communication, as no hardware LEDs work. It looks you fired your dev a bit to early during the file merge process!