Misc ACC-CDS - Complete Dash Set V2.2.2

JSK_Racing · Mar 26, 2022

Was trying to use the M2CS dash but it does not show. I also checked the folder for the cup dash where it should be located, and i don't seem to see any M2CS.. only M4GT3. Can't seem to get the new cars to work. Maybe some bug that needs to be addressed. Thanks

Ensi Ferrum · Mar 26, 2022

Ensi Ferrum updated ACC-CDS - Complete Dash Set with a new update entry:

Small Service

Audi R8 LMS Evo II GT3 2022 needed a little love, the car was always a bit behind (Laps corrected in the Complete Set)

Troubleshooting guide:
After installation, make sure you have the following files (in C:\Program Files (x86)\SimHub\) and folders (in C:\Program Files (x86)\SimHub\DashTemplates\)

Files:

EnsiFerrum.ACCCDS.dll

EnsiFerrum.ACCSharedMemory.dll

ACCCarsList.xml

Folders:

ACC-CDS - 2nd Screen...

Read the rest of this update entry...

Ensi Ferrum · Mar 26, 2022

JSK_Racing said:
Was trying to use the M2CS dash but it does not show. I also checked the folder for the cup dash where it should be located, and i don't seem to see any M2CS.. only M4GT3. Can't seem to get the new cars to work. Maybe some bug that needs to be addressed. Thanks

The M2 CS has no dedicated Dash. The car uses the same Dash as the M4.

wiktander · Mar 26, 2022

nm, sorted. thx for great app

Matt_SI · Mar 26, 2022

I upgraded SimHub, downloaded new set.

I have the files in SimHub. (EnsiFerrum.ACCCDS.dll, EnsiFerrum.ACCSharedMemory.dll and ACCCarsList.xml). I also have all the Folders.
I see plugin in Settings / PlugIns. But I don't see it in "Additional Plugins".

In log there is:

---

[2022-03-26 14:47:30,631] INFO - Creating EnsiFerrum.ACCCDS.EnsiFerrumACCCDS plugin
[2022-03-26 14:47:30,661] ERROR - System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array.
   at EnsiFerrum.ACCCDS.ACCCDS_Main.GetAudibleFeedbackData()
   at EnsiFerrum.ACCCDS.ACCCDS_Main..ctor()
   at EnsiFerrum.ACCCDS.EnsiFerrumACCCDS..ctor()
   --- End of inner exception stack trace ---
   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.Activator.CreateInstance(Type type, Boolean nonPublic)
   at System.Activator.CreateInstance(Type type)
   at SimHub.Plugins.PluginManager.<InitPluginManager>d__47.MoveNext()

---

I hope it helps. If didn't find anything else in Log or I missed it.

Ensi Ferrum · Mar 26, 2022

Matt_SI said:
I upgraded SimHub, downloaded new set.

I have the files in SimHub. (EnsiFerrum.ACCCDS.dll, EnsiFerrum.ACCSharedMemory.dll and ACCCarsList.xml). I also have all the Folders.
I see plugin in Settings / PlugIns. But I don't see it in "Additional Plugins".

In log there is:

---
[2022-03-26 14:47:30,631] INFO - Creating EnsiFerrum.ACCCDS.EnsiFerrumACCCDS plugin [2022-03-26 14:47:30,661] ERROR - System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IndexOutOfRangeException: Index was outside the bounds of the array. at EnsiFerrum.ACCCDS.ACCCDS_Main.GetAudibleFeedbackData() at EnsiFerrum.ACCCDS.ACCCDS_Main..ctor() at EnsiFerrum.ACCCDS.EnsiFerrumACCCDS..ctor() --- End of inner exception stack trace --- at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.Activator.CreateInstance(Type type) at SimHub.Plugins.PluginManager.<InitPluginManager>d__47.MoveNext()
---

I hope it helps. If didn't find anything else in Log or I missed it.

What you can try:

Close Simhub (Double check!)
Open File Explorer, goto C:\Program Files (x86)\SimHub
Look for ACCCarsList.xml, Rename it to e.g. OLD_ACCCarsList.xml
Start the Installer, select repair
After finishing repair, start SimHub

Konrad Kaczór · Mar 26, 2022

Matt_SI said:
I upgraded SimHub, downloaded new set.

I have the files in SimHub. (EnsiFerrum.ACCCDS.dll, EnsiFerrum.ACCSharedMemory.dll and ACCCarsList.xml). I also have all the Folders.
I see plugin in Settings / PlugIns. But I don't see it in "Additional Plugins".

I hope it helps. If didn't find anything else in Log or I missed it.

Since I need to use ACC-CDS v1.5 for some instances and v2.0 for others (don't ask) I do uninstall-install these versions from time to time and I get such behaviour if uninstall or install (or both) process goes wrong somehow.

If what Ensi says (close SimHub (make sure it's not hidden in tray), uninstall ALL instances of ACC-CDS , restart, install the new one (maybe restart), run SimHub) doesn't work but you do have all the DLLs in place then go to SimHub > Settings > Plugins tab at the top and scroll the list until D-E-F, Ensi Ferrum ACC Plugin should be there.
Look closely if:
1. it is Enabled, if it's not then enable it obviously,
2. there are any older versions left on the list somehow, AFAIK this would mean you have a copy of one of Ensi's DLLs - delete it then.
Sometimes I have to repeat the whole process but eventually I always get it working perfectly.

If someone is missing any of the DLLs make sure to DISABLE antivirus live protection. Yes I know people mention this and even more people ignore it because they never had issues but believe me I had maybe 3 cases since 2000s when antivirus SILENTLY deleted a DLL during install.

Zazadj81 · Mar 26, 2022

I resolved my problem cancel and install ACC cds, but the led for new cars don't work?

Ensi Ferrum · Mar 26, 2022

Zazadj81 said:
I resolved my problem cancel and install ACC cds, but the led for new cars don't work?

What LEDs are you talking about?
Arduino LEDs?
Precision Sim Engeneering DDU LEDs?

Patrick McTie · Mar 26, 2022

Okay, so for those having the ACC is not enabled in games issue. I did a complete uninstall of CDS, and reboot. After rebooting, I reinstalled the latest version of CDS, and that seems to have fixed the issue. A bit of a pain, but it worked.

Zazadj81 · Mar 27, 2022

Ensi Ferrum said:
What LEDs are you talking about?
Arduino LEDs?
Precision Sim Engeneering DDU LEDs?

when I select the old cars all the LEDs work, on the new cars inserted in the dlc no.

Zazadj81 · Mar 27, 2022

Ensi Ferrum said:
What LEDs are you talking about?
Arduino LEDs?
Precision Sim Engeneering DDU LEDs?

My dash have arduino leds, the leds don’t work only in the m2, Audi Evo2, Porsche cup, Ferrari challenge, lambo ST, with the profile created by the dash supplier the LEDs work, he too cannot make the LEDs with Acc cds work on new cars

Matt_SI · Mar 27, 2022

To people having problems:

I tried to uninstall the Dashset and I was getting process errors (discord, opera, and 2 something_we_helpers.exe) during the uninstallation. So I went to safe mode. msconfig.exe. Reboot to save mode. Uninstall ACC CDS. msconfig.exe reboot normally. Then I reinstalled the dashset, rebooted the PC, and voila, everything works as it should.

PsychoHeiko · Mar 27, 2022

Ensi Ferrum said:
What you can try:

Close Simhub (Double check!)

Open File Explorer, goto C:\Program Files (x86)\SimHub

Look for ACCCarsList.xml, Rename it to e.g. OLD_ACCCarsList.xml

Start the Installer, select repair

After finishing repair, start SimHub

Hi,
Thx for the great work and the new package. Unfortunately the method of renaming and deleting is not working. Still "ACC is not enabled in Games" error. Deinstalled and installed Simhub and your package. No other packages from you in settings / apps.
Only in available dashboards in Simhub there is complete set v2.2 and second screen v1.3. i can delete 1.3 but after repair it´s there again. No tab in additional plugins, although there is your plugin enabled in settings / plugins.
any ideas?

thx a lot

MrPetroz · Mar 28, 2022

Zazadj81 said:
My dash have arduino leds, the leds don’t work only in the m2, Audi Evo2, Porsche cup, Ferrari challenge, lambo ST, with the profile created by the dash supplier the LEDs work, he too cannot make the LEDs with Acc cds work on new cars

Under "Arduino - RGB LEDs", you can see that the logic to detect the cars is based on 'if car is X, use this LED pattern' for EACH car.

There is no check in the current version that says 'if car is Audi EVO 2' , for example, so it doesn't load an LED pattern.

You'll have to wait for an update from @Ensi Ferrum or add your own logic and pattern

Ensi Ferrum · Mar 28, 2022

Regarding the LEDs:
A simple re-import if the scrips should do the trick.
Find the scrips in
C:\Users\[User_Name]\Documents\SimHub\ACC-CDS\Hardware LED\

sfb76 · Mar 28, 2022

Amazing ... all working .... great

Short question - im lucky and have grid ddu and eye led, what do i have to change on led profile?

Zazadj81 · Mar 29, 2022

Ensi Ferrum said:
Regarding the LEDs:
A simple re-import if the scrips should do the trick.
Find the scrips in
C:\Users\[User_Name]\Documents\SimHub\ACC-CDS\Hardware LED\

are you talking for arduino led? do i have to do this procedure, or i was waiting for update for my type fo dash as it says MrPetroz

Nitrium · Mar 30, 2022

Anybody got the leds working with a https://www.etsy.com/ca/listing/102...m=e181a07d&ref=shop_home_active_1&crt=1&sts=1 ?

HaloInR3v3rs3 · Mar 30, 2022

Nitrium said:
Anybody got the leds working with a https://www.etsy.com/ca/listing/1029055406/sim-racing-cr-5-pc-dashboard-5?click_key=897474f6eee99863333b11644b7d016d0658c450:1029055406&click_sum=e181a07d&ref=shop_home_active_1&crt=1&sts=1 ?

RPM LED's yes...flag LED's no. I asked about this a while ago, Ensi hasn't initiated support for a 20 LED display yet to my knowledge...