ACC Modular HUD Components 1.1

Blinking can be a distraction, it will now only blink if fuel in tank is only enough for 2 laps. This doen't mean you will not have enough, it means you have 2 laps to go. I learned that a good practice is to end with an extra lap on tank anyway.
- This updaye changes only the fuel V3.

Typo fix

This one has taken some long time to tweak, but seems the fuel calculations are really good now.
The BIAS widget has goten a lot of other info, easier to race when all info is closer.

- Remove background color on fuel status level, improve font size to accommodate better larger numbers.
- The track status got a transparent dark background, track status integrated now.

Fuel has gotten a nice feature:
1- It shows percentage of used fuel;
2- It now blinks when you reach 50% of fuel consumption (blinks until 52% is consumed), so you can better calculate if you are good or need to save for the rest of the stint.

Air / Track:
More sensitive: instead showing only ex: 39C it will now show decimals, ex: 39.25C, which can make it easier to identify if the track/air is getting hotter or colder.

1 -Track Temp and Air Temp: the color changes with temperature, blue for cold, red for hot.
2 -Track status. (eg. Optimum, Damp....)

- This should make the overlays always work without depending on 3rd party libraries. Possible fix for the problem mentioned in comment #2

Cosmetic: Cropped the grid size to the overlay size.

- Performance adjustments: use full 'layering', so only one conditional check is needed for all the Engine, Ignition and Empty Fuel Layers.

- Brake Bias: Colorized in yellow the in use bias, font size adjustment to better escalate with the icon.
- Blinkers overlay will only work with Ignition on.