****
The Sim Lab front mount is now sold but the stainless steel adapter plate (and associated fixings) is still available, in case anyone wants to adapt their own front mount. PM me if interested.
****
Modified with a removeable heavy-duty 5mm stainless steel plate (pre-drilled with the standard Fanatec bolt pattern) so that it can be used in either configuration, eg if you currently use a CSW but might upgrade to a DDW in the future.
Packers and longer bolts are included if used horizontally as a wheel deck, as the two 8020 uprights need packing out by a few millimetres because for some reason Sim Lab made the main face of the front mount a few millimetres wider than the gap between the P1/P1-X uprights. If used as a front mount no packers are required.
Very good condition, with the usual bolt marks etc you get once a bracket like this has been installed.
The basic front mount costs €119 from Sim Lab, plus delivery plus import taxes: https://sim-lab.eu/shop/product/sla125-front-mount-p1-x-1414?page=3&category=151#attr=
The modifications (stainless steel plate, drilling, fixings etc) cost me an additional £40 on top at a local machine shop.
How does £75 + delivery sound? I think insured Parcelforce delivery will be around £11.
UK only please.
The Sim Lab front mount is now sold but the stainless steel adapter plate (and associated fixings) is still available, in case anyone wants to adapt their own front mount. PM me if interested.
****
Modified with a removeable heavy-duty 5mm stainless steel plate (pre-drilled with the standard Fanatec bolt pattern) so that it can be used in either configuration, eg if you currently use a CSW but might upgrade to a DDW in the future.
Packers and longer bolts are included if used horizontally as a wheel deck, as the two 8020 uprights need packing out by a few millimetres because for some reason Sim Lab made the main face of the front mount a few millimetres wider than the gap between the P1/P1-X uprights. If used as a front mount no packers are required.
Very good condition, with the usual bolt marks etc you get once a bracket like this has been installed.
The basic front mount costs €119 from Sim Lab, plus delivery plus import taxes: https://sim-lab.eu/shop/product/sla125-front-mount-p1-x-1414?page=3&category=151#attr=
The modifications (stainless steel plate, drilling, fixings etc) cost me an additional £40 on top at a local machine shop.
How does £75 + delivery sound? I think insured Parcelforce delivery will be around £11.
UK only please.
Last edited:
