Thanos PT 6 controller locked in emergency mode, help

bcavill · Mar 21, 2023

Need a bit of help. Just completed updating rig motion.

Thanos AMC pd 6 is locked in emergency activity hold screen

Cant clear it, tried unplugging, exit and reset, nothing stops it .

Soon as I plug it back in the seconds counter keeps going.

Started while I was trying to get the e-stop screen reset ( It has not arrived yet ) so i could test the actuators. they are not moving I think because the estop needs to be deleted or closed.

Any thought on both the above, really stuck, thanks

DonDonki · Mar 21, 2023

I think there's a setting somewhere to set the e-stop to "normal close" or "normal open. You need to change it back to "normal open".

I have the Thanos controller with this e-stop. But I think it should work the same.

https://eracing-lab.com/collections/rs-series/products/e-stop

bcavill · Mar 22, 2023

DonDonki said:
I think there's a setting somewhere to set the e-stop to "normal close" or "normal open. You need to change it back to "normal open".

I have the Thanos controller with this e-stop. But I think it should work the same.

https://eracing-lab.com/collections/rs-series/products/e-stop

Thanks, I found it and that was the issue. The actuators are now working but I feel there is very little movement under braking and turns Have increase the motion filters so that should increase range of movement. Thanks for pointing me in the right direction.