Cars Suzuki Cappuccino Turbo Hayabusa 2.09

[wiltse0]

wiltse0 submitted a new resource:

Suzuki Cappuccino Turbo Hayabusa - Suzuki Cappuccino Turbo Hayabusa

I put the Hayabusa inside the Cappuccino and added a turbo. By default the turbo is set to 0% but you can change it via the cockpit or the pre-race settings. I also put pretty much every setup option on the car, but by default it's zero'd out and drives great from the get go. TCS and ABS on by default. Defaults are the way I built it to drive. The dyno sheet is in the car folder that I used for the torque curve reference.

View attachment 707923

Read more about this resource...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

I fixed all of the inertia and collider issues with the previous version of the mod

The original Cappuccino mod (by ДЯДЯ ДИМА) I used as a baseline for this one was really messed up and the inertia box was way behind the model of the car which made it feel wrong to drive. I updated the models and colliders so the car drives the way it should.

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

Tweaks

Tweaks

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

Updated electronics and suspension defaults

Modified the TCS and ABS Hz and slip ratios. Turned off ESC since it made spin outs harder to control. Updated brake bias so the rear end doesn't come out when locking up the brakes.

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

Updated hitbox

I reworked the collider, now the tires will hit instead of the "body" and I smoothed out the bumpers so it's less likely to snag on a wall. I also reduced the poly count making it easier on the CPU. Bottom is flatter as well.

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

Fixed aero and suspension defaults

Had 3 wings generating lift and way too much drag. Changed the modifiers so it's only using the body wing and made it have a CD of .38 like a miata (can't find actual data for a cappo) and has slight downforce at speed instead of lift. Also unzero'd the camber so that in a corner (where it matters) it actually has zero camber on the outside tire. Which means it's way more hooked up now.

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

Updated credits

Updated the json with credits

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

A bunch of everything

First and foremost I cleaned up a lot of empty ini files. I also deleted a lot of "returns" in the data files, so in notepad++ it's easier to modify the files. I also cleaned up and added some notation to make some of the settings easier to understand.

I revamped the tire options slightly, mainly making all of the sets the same size. I also added a new "slick" but it's just the old semi with 10% more grip. I tried generating some new tires with CM but they made the car flip over on hard...

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

More collider modification and suspension tweaks

As I get better in Blender I was able to finally get the old collider down to 64 tri's which is perfectly in spec for the games engine.

I also lowered the car by about 40mm and then changed all of the suspension presets so it drives as well as it did before it was lowered.

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

realism and modeling updates

I updated the engine inertia and rev limiter hz to be more realistic to a hayabusa engine.

I updated the analog guages so they better match the displayed speed.

I fixed the autoshifter and autoblip features for people who use those.

Read the rest of this update entry...

 

[wiltse0]

wiltse0 updated Suzuki Cappuccino Turbo Hayabusa with a new update entry:

Added gear swaps

I added the option to switch transmissions and differentials.
Trans options, hayabusa, cappuccino, mx-5, rx7, e30.
Differentials, Cappuccino, E30, Ford 9 inch

I also changed the lag down time on the turbo so it stays in boost a little better while traction control is fighting for its life.

Read the rest of this update entry...

 

[HF2000]

I would like slicks for this car as a tyre option to be used in races.

 

[wiltse0]

I would like slicks for this car as a tyre option to be used in races.

I've tried generating new tires with the tire machine in CM, but there are no reference slicks that are in the right sizes. When I tried modifying the stock setup to allow it to generate a set and then scaling down the end results the car just flips over under hard turns. If you're able to generate a set that works and send me the file I can add it and credit you.