Sell SimuCUBE SW20+ (20Nm Direct Drive Wheel) + Buchfink Q1R Quick Release System

[knightop1]

Sold!

 

[knightop1]

The equipment is like new, a few scratches here and there, but nothing severe, regular cosmetic scratches from fitting to a rig (I can provide more pictures if curious).

Edited to fit current sale.

 

[bunnsnow]

I'd be interested in the wheel side Q1R if u end up splitting

 

[knightop1]

I'd be interested in the wheel side Q1R if u end up splitting

I'm going to hold off on that for now haha. I will keep in touch though.

 

[tsvetannn]

If you still happen to have the system, message me please, thanks!

 

[Paul Glover]

If you still happen to have the system, message me please, thanks!

If you are interested in the item please PM the seller.

 

[RedDragon27]

PM

 

[knightop1]

The Buchfink Q1R system has been sold. DD sold.

 

[Ricardo Golfeti]

Howdy sim racing community!

I'm selling this due to the unfortunate ability to use this at the current moment, it has just been sitting in a closet.

SW20+ (20Nm Direct Drive Wheel)
"Direct Drive Wheel built around the MiGE 130ST-M10010 (small MiGE) with a 10,000 ppr /40,000 cpr (40K) incremental encoder or 2048 line /.2,097,152 (2M) cpr sincos encoder.

The motor controller is housed in a quiet fan-cooled aluminium enclosure and consists of a Granite Devices IONI Pro HC and SimuCUBE driven by a Meanwell SDR-480-48 . This is sufficient to drive the 130ST-M10010 to its maximum 20Nm torque output."
Above is the description of the SimuCUBE SW20+ from sim-pli.city.

What is included for the SimuCUBE (all that you need):

• SW20+ Control Unit (20Nm
• MiGE 130ST-M10010 with 40K incremental encoder or 2M sincos encoder
• 3 metre motor power cable
• 3 metre motor encoder cable
• Emergency Stop unit with 3 metre cable
• 2x 2 metre USB Data Cables
• Motor Shaft to Steering Wheel Adapter
• An adjustable motor mount
• Location specific Power Cable

Buchfink Q1R Quick Release System
Together with the SimuCUBE, I purchased a Buchfink Q1R quick release system because it is one of, if not, the best quick release system out there (Sim Racing Garage still uses it). I purchased the Q1R base with 70mm wheel side with an additional 70mm wheel side

What is included for the Buchfink Q1R Quick Release System:

• 2x Q1R 70mm Wheel side
• Q1R Base Side

Photo of the hardware (wheel side mounts not pictured, I can supply them if you need):

View attachment 339725

Sale
I'm selling the initial two products direct drive system and will cover shipping (if in the United States) (or drive if nearby) for $1100 $1000 $800 all included. PM me for any further details.

What is the total weight of the kit? any possibility to ship to Brazil?

 

[Fosters_AUS]

PM Sent

 

[knightop1]

All has been sold.