Wanted monitor mount

monitor mount wanted.

Intergrated or stand alone.

If it's for single monitors there must be an attachment I can buy elsewhere to upgrade for triples like the trak racer.

UK based.
Thanks
 
Hi,
Ive settled on a simlab triple integrated, if you have one send me a message,
All I really need is these brackets that attach the triples arms together. So even better if you just have them
 

Attachments

  • Screenshot_20211011_205757.jpg
    Screenshot_20211011_205757.jpg
    87.3 KB · Views: 57
Last edited:
I have 4 of them, i upgraded from intergrated to stand alone. slight marks on then nothing bad just from the bolts but only on one side. Would of included them with the Simucube OSW.
 

Attachments

  • 20211012_055202.jpg
    20211012_055202.jpg
    249.5 KB · Views: 54
  • 20211012_055146.jpg
    20211012_055146.jpg
    239 KB · Views: 53
  • 20211012_055137.jpg
    20211012_055137.jpg
    270 KB · Views: 53
Last edited:
I also have the side bars for sim labs intergrated monitor mount. The 2 big uprights that attach to the two motor mount suports but they have marks on them but can be painted id throw them in and the plates with the simucube.


I also have the 3 vesa mount plates for the monitors that come with the monitor mount from sim labs again ill throw the 3 plates in as well.

so that's the
monitor mount brakets
monitor mount plates
monitor vesa mounts
simucube wheel base
Ill throw in one of the SRC Quick releases
and the 70mm bolt pattern motor shaft clamp and motor mount for
£550
 

Attachments

  • 20211012_060956.jpg
    20211012_060956.jpg
    188.6 KB · Views: 53
  • 20211012_061004.jpg
    20211012_061004.jpg
    158.1 KB · Views: 49
  • 20211012_061020.jpg
    20211012_061020.jpg
    184 KB · Views: 56
  • 20211012_061026.jpg
    20211012_061026.jpg
    168.9 KB · Views: 57
Last edited:
Here are the vesa plates and in good condition
 

Attachments

  • 16340158723522222468872794886958.jpg
    16340158723522222468872794886958.jpg
    158.8 KB · Views: 50
  • 16340158841265746282204441279013.jpg
    16340158841265746282204441279013.jpg
    174.8 KB · Views: 52
all the parts are from sim labs intergrated monitor mount in the picture.
 

Attachments

  • 20211012_062128.jpg
    20211012_062128.jpg
    74.5 KB · Views: 44
Last edited:

Latest News

Do you prefer licensed hardware?

  • Yes for me it is vital

  • Yes, but only if it's a manufacturer I like

  • Yes, but only if the price is right

  • No, a generic wheel is fine

  • No, I would be ok with a replica


Results are only viewable after voting.
Back
Top