Is it possible to have the driver centerted to the left/right of the screen so dashboard wont get warped?

[assetmus]

Hi everyone, i have been wondering if its possible to possition the driver slightly to the left instead of centered on screen. I play on a 57inch 4k TV and like to position the view so it covers the whole windscreen, today the dashboard warps since my sim-rig is as far as possible to the left of the TV to get almost a full view of the windscreen. Is there any settings to adjust where the point of view originates or is it only possible to have it in the middle of the screen? As you can see on the pictures taken the right speedometer is warped and not fully visible which can be extreme in some cars and others not so bothering.
Anyway its awesome to have a passenger seat next to the rigg when playing with a friend, highly recommend.

 

[Stereo]

It's technically possible but not really an intended use of the feature - CSP has a lua app to correct for curved screens, and if you set it to 0 curvature 0 triple screen geometry, you can still move the eye position around. You go to "graphics adjustments" in CSP settings, scroll down to "scriptable filters", enable it and pick the curved screen one. You also need to activate triple screen rendering in base AC settings and set up that with the correct geometry of your screen (as if it was divided in thirds, so use actual distance to your eyes, 1/3 of the width, 0 angle, 0 bezels) Then in the curved screen's app, go to the maximum radius it allows and work from there.

Pretty likely once you've done that you'll need to reset the driver seat position to be in the driver's head.