Graphic Problem ._.

[Naokiii!]

hi all
I have a problem with my racer v0.9.0 RC3
i put some image of problem >.<


The QLOG is

Sun Sep 30 22:35:36 (INFO): [racer/3600] --- application start ---
Sun Sep 30 22:35:36 (INFO): [racer/3600] Racer version: 0.9.0 RC3 (Jul 2 2012/14:34:52) - customer: Internet
Sun Sep 30 22:35:37 (INFO): [racer/3600] Registration of './openglfilter.ax' successful.
Sun Sep 30 22:35:37 (INFO): [racer/3600] DGPUShaderManager: render engine using Cg (1.40 NVIDIA via Cg compiler)
Sun Sep 30 22:35:37 (INFO): [racer/3600] DFrameLock::SetVSync: set vsync to 0 (verify that it now is 0)
Sun Sep 30 22:35:37 (ERR ): [racer/3600] DFBOCubeMap; frameBuffer status not complete (Unsupported framebuffer format)
Sun Sep 30 22:35:37 (ERR ): [racer/3600] DFBOCubeMap ctor: OpenGL error (1286): (null)
Sun Sep 30 22:35:37 (INFO): [racer/3600] Physics engine: NEWTON v2.34, architecture 0
Sun Sep 30 22:35:37 (INFO): [racer/3600] FMOD: software format default is rate 48000, fmt 2, outChannels 2, inChannels 6, resampler 1, bits 16
Sun Sep 30 22:35:37 (INFO): [racer/3600] FMOD: attempted software format is rate 44100, fmt 2, outChannels 2, inChannels 6, resampler 3, bits 16
Sun Sep 30 22:35:37 (INFO): [racer/3600] FMOD: modified software format is rate 44100, fmt 2, outChannels 2, inChannels 6, resampler 3, bits 16
Sun Sep 30 22:35:37 (INFO): [racer/3600] Controls: main control file is 'profile1.ini'
Sun Sep 30 22:35:37 (INFO): [racer/3600] Safety changed to: SAFE
Sun Sep 30 22:35:39 (INFO): [racer/3600] Loading track 'carlswood_nt'
Sun Sep 30 22:35:42 (INFO): [racer/3600] QNClient:Connect() attempt to localhost:25000 (RNetwork)
Sun Sep 30 22:35:42 (INFO): [racer/3600] QNClient: connected to server (our clientID=71, client name 'RNetwork')
Sun Sep 30 22:35:42 (WARN): [racer/3600] No AI found for track carlswood_nt, car lamborghini_murcielago (also no ai/default.ini)
Sun Sep 30 22:35:42 (INFO): [racer/3600] Loading car 'lamborghini_murcielago'
Sun Sep 30 22:35:43 (WARN): [racer/3600] No AI found for track carlswood_nt, car lamborghini_murcielago (also no ai/default.ini)
Sun Sep 30 22:35:43 (INFO): [racer/3600] Loading car 'lamborghini_murcielago'
Sun Sep 30 22:35:44 (ERR ): [racer/3600] DFBOTexture ctor: OpenGL error (1286): (null)

can any solution?
regards

 

[boomer541]

Do you have a good TOD folder with good curves as it looks like one problem is the too bright screen. Yu may have to adjust the curves.

 

[William Geuze]

Do you have an old videocard?

 

[Naokiii!]

bright of screen o.O.. old version run good, atm v0.8.39 latest version run good but v0.8.40 to up have problems see others colors or black cars o.o"

and have nvidia gt220 1gb

 

[Alexander Knoll]

Oh...gt220...this is a little bit weak, not to old...but weak....
I use a GTS250 and it's verry hard on the limit...i think 2 or 3 versions of racer it can handle, but then i need a better one...
For the mom you can try to reduce the graphics settings...maybe disable the shadow's or the bloom...not sure if it helps...but worth a try...

Alex

 

[Mr Whippy]

Racer ran ok for me on my 8800GTX 768mb... that was a while back now but I'm sure I ran HDR back at the time I had it, along with the CSM stuff... it was the CSM that brought the performance right down.

Maybe turning CSM off will give the biggest benefit, or turn the CSM resolution down to say 256px... it won't look great but it'll run a LOT quicker

Dave