TurboJLo
Premium
Open box never used FlagGhost Belt Tensioner kit aka active belts for Sim Racing.
Kit includes the following items:
90ST-M02430 220V 750W AC Servo motor 3000RPM 2.4 N.M. 0.75KW servomotor Single-Phase ac drive permanent magnet Matched Driver
Model number: WH-B90-5Sh
WH stands for White Drive unit (new version with no noise)
B stands for 90* connectors on motor unit
Sh stands for shielded cables (no EMI)
1 x 90ST-M02430 220V 750W Servo Motor Version B
1 x AASD-15A 750w servo driver Version white/no noise
1 x 3 Meter Shielded Motor Cable (90-degree connector)
1 x 3 Meter Shielded Encoder Cable (90-degree connector)
1 x DB25 straight through double shielded cable SC920S07MM
1 x Power cable
5 x Ribbed belts in various lengths to allow flexibility in servo motor placement
1 x Size 90 server motor bracket mount
1 x Belt Tensioner seat belt clamp/roller black 3D printed and assembled with all hardware/bearings for 2" belts (chest belts can be 3" but needs to taper to 2" to work with rollers)
2 x 3D printed mount styles: flat and angled for Belt Tensioner
Will also provide details on servo driver settings.
NOTE:
Requires a Thanos AMC-AASD15A or Thanos4U controller (not included)
Requires SimHub or Sim Racing Studio 2.0 software (not included)
Requires 4 or 5/6 point (preferred) racing harness/seat belts with 2" wide straps (not included)
Asking $500 plus actual shipping costs (My cost was over $800)
Kit includes the following items:
90ST-M02430 220V 750W AC Servo motor 3000RPM 2.4 N.M. 0.75KW servomotor Single-Phase ac drive permanent magnet Matched Driver
Model number: WH-B90-5Sh
WH stands for White Drive unit (new version with no noise)
B stands for 90* connectors on motor unit
Sh stands for shielded cables (no EMI)
1 x 90ST-M02430 220V 750W Servo Motor Version B
1 x AASD-15A 750w servo driver Version white/no noise
1 x 3 Meter Shielded Motor Cable (90-degree connector)
1 x 3 Meter Shielded Encoder Cable (90-degree connector)
1 x DB25 straight through double shielded cable SC920S07MM
1 x Power cable
5 x Ribbed belts in various lengths to allow flexibility in servo motor placement
1 x Size 90 server motor bracket mount
1 x Belt Tensioner seat belt clamp/roller black 3D printed and assembled with all hardware/bearings for 2" belts (chest belts can be 3" but needs to taper to 2" to work with rollers)
2 x 3D printed mount styles: flat and angled for Belt Tensioner
Will also provide details on servo driver settings.
NOTE:
Requires a Thanos AMC-AASD15A or Thanos4U controller (not included)
Requires SimHub or Sim Racing Studio 2.0 software (not included)
Requires 4 or 5/6 point (preferred) racing harness/seat belts with 2" wide straps (not included)
Asking $500 plus actual shipping costs (My cost was over $800)
Attachments
Last edited:
