DFBOTexture; frameBuffer status not complete

Kyle Brannon · Aug 19, 2010

(ERR ): [racer/2728] DFBOTexture; frameBuffer status not complete (Framebuffer incomplete, duplicate attachment)

Basically, on start up (CG or no CG) I get that incomplete frameBuffer error and it just sits there at a Black Screen... what does that mean?

Oh and just in case:

Windows 7 64 Bit

AMD 64-Bit Dual Core 2.6 GHz (5200+)

4 Gigs of ram (3.87 usable)

and here comes the painful part...

GeForce 6150SE nForce 430

that's 128 MB dedicated with 1727 MB system shared...

boomer541 · Aug 19, 2010

That's a new Qlog error that I have not seen so some body else hopefully can help you.

Welcome to the Racer community!

Kyle Brannon · Aug 20, 2010

Ahem, That's welcome BACK to the community!

I signed in with Facebook because I was too lazy to create my stuff from the old forum

RageMcCloud (Rage960) and I used to make maps and you helped me with my ridiculous glitches and bugs if you still remember

KS95 · Aug 20, 2010

Ah, I remember that name.

Welcome back Rage

Kyle Brannon · Aug 20, 2010

Yeap, and now I'm more experienced with game design AND more patient so I can make some quality maps instead of... well, they weren't BAD... Creative I guess we could say XD

But yea... I guess some of the more memorable things I contributed were QLog's and Screenshots of some rare glitches... I'm a magnet for those one in a thousand errors haha

boomer541 · Aug 20, 2010

I'm 73 years old and have a lot of senior something or others. Welcome back!

Sorry I can't help with the Qlog problem.

Kyle Brannon · Aug 25, 2010

Soo yea then. What would y'all suggest? I can't really attempt it on any other computers unfortunately.

boomer541 · Aug 25, 2010

Which version of Racer are you using? If ver 0.0818 it opens at night, and your racer.ini may need adjusting.

Kyle Brannon · Aug 27, 2010

I have 8.17

boomer541 · Aug 27, 2010

Looks like that graphics is for a laptop and checking the specs with Google indicates that it just doesn't have the capacity to work with Racer, sorry.

Hope you have a regular computer with an nVidia grphics card, at least 9000 series.

Kyle Brannon · Aug 28, 2010

I don't even make it to the main menu. I click the exe and it opens the window but is all black... No GUI or Background or anything. Just a blank black window. It's not loading anything either... just sitting there idle, doing nothing. Doesn't even lag when I click exit. Exits immediately (Points that it didn't have to halt any processing or anything)

Westie · Aug 30, 2010

Hope somene can help you out with this one Kyle, because I have exactly the same problem. Frustrating isn't it

rob

Alper Ã‡obanoÄŸlu · Sep 4, 2010

i cant start this **** i have a blackscreent no warning error or crash just a blackscreen

Sat Sep 04 03:09:54 (INFO): --- application start ---
Sat Sep 04 03:09:54 (ERR): DFBOTexture; frameBuffer status not complete (Framebuffer incomplete, duplicate attachment)

i tried everything 0.8.17, 0.8.19, no cg fullscreen windowed all resolutions low medium high everything its same **** i'm very angry now what's this **** huh ?

look this

Sat Sep 04 03:01:14 (INFO): [racer/3588] DGPUShaderManager::Init() Geometry shading is not supported on this card (ATI?).

what the **** ati ? my grp card is nvidia 7900 gs ! DONT TELL ME "GOOGLE IT" ABOUT THIS ERROR !

WASTE OF TIME !!!!

boomer541 · Sep 4, 2010

Don't get hyper, Alper! People are looking into the problem but have not come up with a solution yet.

You could post your sytem specs, computer, op. system and anything else pertinent and oh yes welcome to the racer community.

luthobu · Sep 5, 2010

Hm. Turning off FBO, Bloom and CSM (also disable ghost) should help,
but it does not look good. At least you get past the black screen,
and can load content.

Alexander Knoll · Sep 12, 2010

Alper Ã‡obanoÄŸlu said:
i cant start this **** i have a blackscreent no warning error or crash just a blackscreen

Sat Sep 04 03:09:54 (INFO): --- application start ---
Sat Sep 04 03:09:54 (ERR): DFBOTexture; frameBuffer status not complete (Framebuffer incomplete, duplicate attachment)

i tried everything 0.8.17, 0.8.19, no cg fullscreen windowed all resolutions low medium high everything its same **** i'm very angry now what's this **** huh ?

look this

Sat Sep 04 03:01:14 (INFO): [racer/3588] DGPUShaderManager::Init() Geometry shading is not supported on this card (ATI?).

what the **** ati ? my grp card is nvidia 7900 gs ! DONT TELL ME "GOOGLE IT" ABOUT THIS ERROR !

WASTE OF TIME !!!!

Its not a fail from the Racer engine.....update you nvidia driver...
öhm..and why are you so aggro?
Do you have any private problems?
Oh...and if racer is waste of Time for you please LET IT BE!

Kyle Brannon · Sep 22, 2010

boomer541 said:
Looks like that graphics is for a laptop and checking the specs with Google indicates that it just doesn't have the capacity to work with Racer, sorry.

Hope you have a regular computer with an nVidia grphics card, at least 9000 series.

It's definitely not a laptop lol. It's just 5 years old or so... I've been slowly upgrading it and Graphics card is really the only thing left to make it a decent computer... It's just still using a crappy onboard one...

DavidI · Sep 23, 2010

Kyle Brannon said:
It's just still using a crappy onboard one...

That would probably explain it then, Racer needs a decent GPu as well as a decent CPU to run on. A five year old integrated GPU running Racer is like entering a Morris Minor in this years Le Mans.

ATM I'd recommend an nvidia 9600GT as a minimum, ideally a GTX460 1GB RAM or better GPU.

Alper Ã‡obanoÄŸlu you ned to try the NoCG version of Racer, a 7900GT can't run Cg shaders, only 8600 & newer were designed with Cg support.