Dayton tt 25 - setup on diy sim rig

[curac268]

Hello,

Just installed it on my rig ( 2 on chair, 2 on leg stand )

Just to have people info on power and best setup for this small, but god shakers .

Will attach more pictures shortly, with details.
They are great when the profile is not to thick.

First picture is shakers attached to secretlab chair. Powered via audiophonics BT60w pro which is powering for now all 4 speakers with laptop power supply of 90w, 19.5V, 5A and waiting for other 2 input amp for now.

I put shakers on aluminium profile cut out my self 4mm sheet, and used 2 screws from the chair, put some rubber for dampening lower partnof chair. They work really great on aluminium, without cuted holes with surface mounting ring.

The second pair is attached to 3mm aluminium . First i put them on wood 5cmx9cm, because my rig is from that wood and they dont do anything.

I removed one wood from pedal deck, cut out aluminium sheat and atached one half to wood and other half is for small shakers in air. They work great like that, will provide extra picture soon and details also.

 

[blekenbleu]

Elegant design, with cantilevered plate acting as a spring,
damped by seat cushion and your legs.
Exciters would also work well in that configuration.

 

[curac268]

3mm aluminium is perfect for them,4mm is also ok, you need to lower it down to 30% on simhub, to much strong vibratition .