Arduino SFX Shield/Extension Board Group buy list AU

[acekrusty23]

As you might have read @Pyronious has created shield which makes the electrical part of installing the SFX100 super easy and idiot proof.



We will be organising a group buy and make this board available to everyone who's interested

The price of the board will be somewhere around 20 dollars
( plus shipping / handling and taxes if needed)

I will be taking part of the Australian group buy.

German speaking SFX100 builders might be better of putting in their order here
https://forum.virtualracing.org/showthread.php/113873-Arduino-SFX-Shield-Extension-Board-Sammelliste

When more details are available they will be posted here.

If you are interested and want to be put on the list, leave you nickname and country below in the topic.

Second poster, please copy the first posters name + your nickname, 3rd poster copy the names of the first 2 and add yours.

Please keep this topic as clean as possible and only mention your nickname, country added to the one listed above you.

UK SFX builders go here:
https://www.racedepartment.com/thre...nsion-board-group-buy-list-uk-ireland.166666/


Update

After the pre-order list is finalised we will be looking at a lead time of 3-4 weeks for production and with shipping and handling = 5 - 7 weeks until final delivery

 

[acekrusty23]

Hey guys.. Any word on the 2nd round yet..?

Didn't buy one the first time around as someone called WhippyVan offered to shout me one which I appreciatively accepted!

Anyway... haven't heard from him since so I guess I should buy a couple myself to have handy..!

So put me down for two on any future group buys!

Thanks

Simon

Check out the discord channel. I think they’re organizing more boards. I’ll be unavailable for Au/nz distribution.

 

[Serge.M]

Would be in if there’s another run of these

 

[acekrusty23]

Calling @AussieSim , your board is the last one to be sent. Need your address and shipping payment mate.
Cheers.

 

[Paul Clark]

I’d be up for two of these if there’s a secondary block buy - where do I nominate for inclusion ? Thanks all

 

[Spikar]

Any news on a second group buy?
Keen on one too.

 

[Paul Mullins]

Hey Guys

I decided to order my own PCB's of the 'Group Buy SFX-Shield' design but but in sexy matt black..

I had 20 boards made and bought enough parts to build up 5 complete units with the D-sub and screw terminal connectors, pins for the arduino etc.
I'm going to be keeping two complete boards for myself but selling the rest off to Aussie builders.

If you're interested, please reply to this thread indicating:

Board Type: Bare PCB or Complete
Qty:
Post Code:
Second poster, please copy the first posters name + your nickname, 3rd poster copy the names of the first 2 and add yours.

Pricing:
15x Bare PCBs $10AUD each including postage anywhere in Australia.

3x Complete boards with all pins and connectors, professionally hand soldered , cleaned and tested to IPC-A-610 specs: $30AUD each plus postage.



*** Full credit for the board design goes to @Pyronious for making this open source ***


EDIT: Corrected my many spelling mistakes

 

[Serge.M]

You need just one board per SFX build?
If so then in for complete

Serge.M

 

[Paul Mullins]

You need just one board per SFX build?
If so then in for complete

Serge.M

Correct Serge...

One board will run four motors/actuators.

 

[Spikar]

Sending you a PM.

 

[Serge.M]

Correct Serge...

One board will run four motors/actuators.

Can I get two complete ones please? Friend is also building one

 

[Paul Mullins]

Can I get two complete ones please? Friend is also building one

No problems Serge... send me a PM with your address and I'll get the total including postage unless you're in Adelaide, then you're welcome to pick it up.

 

[Serge.M]

No problems Serge... send me a PM with your address and I'll get the total including postage unless you're in Adelaide, then you're welcome to pick it up.

PM sent

 

[MattDignam]

I'll take two complete boards please if you have any available. I'm in Adelaide and happy to pick up! Thank you.

 

[AeroMicky]

I would also love to get 2 complete boards please, Melbourne Australia

 

[Paul Mullins]

I only have completed boards left if anyone is wanting one (or two)

 

[MattDignam]

Paul, i have obtained a board now so please feel free to offer my board to someone else who may need it. Thanks, Matt

 

[mechsicko]

Hello, new sfx'r starting my journey. Am interested in a completed Shield if there are any floating around the US

 

[pkopko]

looking for 3 complete boards to the US. Is that possibe?

Thanks in advance

 

[Rumpel_D]

I only have completed boards left if anyone is wanting one (or two)

Hey Paul I'm dead keen for one of those boards if they're still available? I'm in Adelaide.

 

[JoeB1000]

Paul,

I would be keen on a complete board also. Located in Sydney

Thanks