Wanted Any fanatec steering wheel

[George_Boast]

Turns out I cannot access the tuning menu of my csw with a podium hub so will need to buy any steering wheel

 

[xoSx.Racing]

you can access tuning menu in the Fanatec Software

 

[George_Boast]

you can access tuning menu in the Fanatec Software

Not with a CSW 2

 

[AJ McDaddy]

Are you using the correct drivers? 336 and above? They give you access to the tuning menu in the software. Also Fanalabs allows you to do this as well, but you need the updated drivers.

Beta drivers

forum.fanatec.com

 

[George_Boast]

Are you using the correct drivers? 336 and above? They give you access to the tuning menu in the software. Also Fanalabs allows you to do this as well, but you need the updated drivers.

Beta drivers

forum.fanatec.com

This will work on my csw 2?

 

[AJ McDaddy]

Changelog of V346:
1. Fixed Map Sequential Shifter to Paddles that does not work when Mapping settings is checked in the Settings page.
2. Fixed issue of 4k and 1080p resolution that disalign the controls coordinates in Settings page and Tuning Menu page.
3. Fixed the correct naming of Formula Steering Wheel Picture Selection in Settings page to "ClubSport Steering Wheel F1® Esports"
4. Fixed Freezing issue of the Tuning Menu page.
5. Add Shifter Calibration in the Settings Page for Steering Wheel without TM Button "PHub". (Shifter is connected in the Wheel Base)
6. Control Panel pages re-order and shows according to Device connected.

Firmwares included:
- CSW V1 Base : CSW_Base_V662_rev1681_app
- CSW V2 Base : CSW_V2_Base_V662_rev1681_app
- CSW V2.5 Base : CSW_V2_5_Base_V662_rev1681_app
- CSL E Base : CSL_E_Base_V662_rev1681_app
- CSL E Base PS4 : CSL_E_PS4_Base_V662_rev1681_app
- DD Base : PDW_DD_Base_V662_rev1681_app
- EBLDC : CSLEWBPS4_CSWBV2.5_EBLDC_V22_rev335_app
- EBLDC DD10 : PWBDD1_EBLDC_V30_rev356_app
- EBLDC DD20 : PWBDD2_EBLDC_V30_rev356_app
- RMCL : RMcL_V30_rev38_app
- RFORMV2 : RFORMv2_V28_rev113_app
- PHub : SW_P_Hub_V1_rev113_app

 

[AJ McDaddy]

Hope you found this information useful.

No need to thank me if it is... You're welcome....

 

[George_Boast]

Hope you found this information useful.

No need to thank me if it is... You're welcome....

Hey sorry, I just saw this been chased up in so many threads. Really appreciate it; will try tomo