Do you have the input method set to gamepad in the settings? Gamepad FX scripts only work with that option.
Also, check if Gamepad FX is enabled and the if right script is selected.
Last edited:
Misc Advanced Gamepad Assist 1.5.4
- Thread starter adam10603
- Start date
Also, check if Gamepad FX is enabled and the if right script is selected.
Last edited:
Hi, this is just a terrific mod, thanks to the author for his work. there are some difficulties in setting up the script, I'm trying to make the control was very viscous and at the same time sensitive to speed. but at the same time I can not achieve a smooth rotation of the steering wheel. when driving from the cockpit it is very annoying, do not want jerky movements. I tried to change some of the values in the script itself, but apparently I do it in the wrong place or wrong. it is interested in smoothing for steering, while the sensitivity to speed is set to maximum. Too low general steering angle (1-2%) makes the car overly viscous. any chance to fix this, or update, or tell me personally where and how I can change the formula in .lua script? thanks in advance for the reply.
I'm not sure what you mean. If the steering is too sensitive near the center, then increase the steering gamma in AC's control settings. Also check if your deadzone is correct.
Last edited:
Yeah I play without rumble, so I never tested that. But I'll look into it for the next update.
Last edited:
What settings , or values do you use personally for drifting ? I’m still trying to figure out what to change for drifting on controller. I’ve stuck to the default 60% steering assistance and 60% Steering rate. I’ve been so accustomed to that A7-assist script that gave drifting a carx feeling but I love this one and I wanna get used to it for drifting and props to the creator of this mod for his hard work. I just wanna get a baseline on settings and values for the UI app to work on for drifting.
Last edited:
That depends on how you want it to affect drifting, everyone's tastes are different. But there's a way to turn it into a full drift assist kind of thing, which I know some people like. Basically just crank the "Max angle" setting to 90°, then increase "Countersteer response" a bit, and also give it more "Damping" than usual.
After that, you should tweak the "Response" setting. If the car doesn't drift enough then decrease it, or if it spins out too easily then increase it. There should be a sweet spot where the assist will hold a drift for you without any input, and you only have to steer for course corrections or direction changes.
Last edited:
Would there be any way to reduce overall sensitivity for the first 10-15% of steering input? Similar to the gamma setting, but without reducing sensitivity for the rest of the input range. With 100% gamma I feel like that first part of the steering curve is too overly sensitive, but the rest is fine, making small adjustments really hard, but If I increase the gamma slider to around 135% I already feel as if the rest of the input range is jerky and skipping... Just make that initial curve slightly sticky/resistant, as to make those small steer inputs at high speeds more precise.
Excellent assist, so far the best one in Racedep for me.
Excellent assist, so far the best one in Racedep for me.
Try reducing steering rate at speed, gives you a lot of precision at higher rate of speed without exccess; also crank that damping up:
P.S.: Best use linear gamma on both Steam and in AC; it gives you much more control,but that only IMO.
Last edited:
I haven't had issues with the steering curve so far, but I'll look into it. Personally I use >100% gamma in AC, but I can't remember the exact setting now.
I haven't had much time to work on the assist lately, but I'll try to address everything that was brought up here in the next update.
Soon(tm)
I haven't had much time to work on the assist lately, but I'll try to address everything that was brought up here in the next update.
Soon(tm)
Similarly
Just follow the instructions in the description
Are you guys running CSP 0.1.79? I can't think of much else. Make sure you follow the instructions closely when you install the mod.
Last edited:
All okay. I solved the problem.
@adam10603
So I have spent a couple of months now using exclusively your app and here are a couple of recommendations/requests for the next release:
Similar to response curve can we get a gamma and steering speed curves bettween slow driving and fast driving? I know you are trying to keep it nice and neat without overwhelming the user, but these two curves will allow for so much more flexibility...
So I have spent a couple of months now using exclusively your app and here are a couple of recommendations/requests for the next release:
Similar to response curve can we get a gamma and steering speed curves bettween slow driving and fast driving? I know you are trying to keep it nice and neat without overwhelming the user, but these two curves will allow for so much more flexibility...
Can u say what did you do? I've got similar problem, but gamepadfx is ok (i can feel it). Menu is empty
adam10603 updated Advanced Gamepad Assist with a new update entry:
v1.1.4
Read the rest of this update entry...
v1.1.4
Read the rest of this update entry...
