tactile

  1. H

    GS5 GSeat Mounting on Simlab P1X

    Can anyone show pictures of how they mounted their GS5 Gseat to a P1X? Stuck at this for the moment and it’s holding up my build. Also, if anyone can recommend the best transducer pucks along with amp I can get that mount right onto the panels and if the mount on top or on the backside of the...
  2. F

    Bass shaker mounting and placement on P1-X

    Hi everyone, was hoping to get some advice on mounting and placing bass shakers on my P1-X. I have three shakers (2x AuraSound AST-2B-4 and 1x Dayton BST-1) that I want to mount. After doing some research it seems a good placement would be two shakers underneath the seat in L/R configurations...
  3. blekenbleu

    SimHub Bass Shaker effect: AM generates low frequencies from pucks and exciters

    As a small offering of appreciation for those who contribute to this community, attached is a SimHub ShakeIt bass shaker profile that provides tactile sensations below frequencies for which Dayton exciters and pucks deliver useful energy. It operates on the same principle as AM radio, namely...
  4. ijac

    Can the Nobsound NS-01G amp drive two Dayton Audio BST 1 shakers?

    Can the Nobsound NS-01G 2x50W amp drive two Dayton Audio BST-1 (50W each) shakers? Or would I need a 2x100W amp? Thanks
  5. B

    Possible budget tactile amp with dsp?

    Hey all, Recently getting into sim racing, but am on a budget, so am running a playseat challenge as my 'rig', with a t300rs. I'd like a little more tactile feedback so am investigating tactile options. im currently considering 4x Dayton DAEX32EP two of which mounted direct to the brake and...
  6. Mr Latte

    Simhub Shakeit - Tactile Effects / Multilayer RPM 07/03/21

    Hi everyone, Here we have 3 samples of different feeling tactile RPM sensations to use with Simhub Shakeit. Simhub Simhub Shakeit Info In this offering, I share some of my own learning/experience to bring better feelings and more immersive RPM effects. The engine seems a more complex effect...
  7. Fastard

    Vibrating seatpad (shipped from Europe)

    I am interested in buying a vibrating cushion seat in order to add some immersion in my sim racing. The options: - Simshaker Jetpad - SRS Shakeseat - Realtus Forcefeel The problem: none of them available to buy in a european e-shop. Jetpad has to be shipped from Russia, SRS from the US and...
  8. J

    DIY lockdown project: Sequential Shifter on T300RS, PS4, playseat challenge

    My final lockdown project after the bass shaker and handbrake was a proper sequential shifter. I already had the TH8A shifter but i didn't want to keep changing it between H-pattern and sequential, plus there is no tactile 'clunk' in its sequential action. Of course, the thrustmaster TSS...
  9. Codeias

    Tactile Journey / Experiment

    The start So with a P1-X rig in place, a decent 2080ti PC silently running in the background, triple monitors and a HTC Vive Pro VR headset on hand, I thought all was well in the world, but something was still missing from the emersion of any sim I loaded... at first I thought motion should be...
  10. leotkowns

    My F-GT Tactile Build Thread

    This will be the start of my tactile build thread. I spent the past months reading over the massive tactile thread as well as reading others' experiences. I have ordered a few things and sent some things back the further I dove into this. I think I will reserve the next spot as my current setup...
  11. Mr Latte

    HOLY Shamolee - The Long Requested / Buttkicker Gamer 2 / Simhub Tactile Effects Thread

    I've been asked for a long time to do a thread on one of the most popular ever tactile transducers. To this day the Buttkicker Gamer 2 is one of the most considered entry-level packages. The CURSE OF TACTILE: As tactile becomes a REAL headache of a topic. First off, I'm going to simply...
  12. S

    Playseat F1 with ButtKicker

    Hi all, First post here on this forum, since a few months I started playing F1 on PS4, so I'm still a newbie in sim racing. I am looking into some options to add tactile feedback to my Playseat F1 sim rig. Right now, I am thinking of buying the ButtKicker mini Concert or the Buttkicker mini LFE...
  13. DrRob

    My first SimRig build!

    Gents, after playing on a wheelstand setup for quite some years, I decided to upgrade to a proper rig. I was always hesitant to litter the living room witha full blown rig, so made do with a GT Omega "Classic". The whole journey started for me with a PS3, GranTurismo 5, a 100" front projection...
  14. JohnnyV

    Sell SOLD Tactile Feedback kit for sale

    Hi, Im selling a full tactile feedback kit including: - 12v power supply - 4 channel amp - 4x Buttkicker mini LFE - necessary cables Easy to mount on an 80/20 rig with m6 bolts/t-nuts. Can be controlled using the free software SimHub. Reason for sale: motion platform. Located in the...
  15. teekoh

    Need help getting into tactile - with one soundcard

    Hi guys, My first post here. I've been using a Playseat Challenge for a while and just this week upgraded to a RSEAT S1. I've read a lot of the posts here especially all the ones by Mr. Latte. It's been very informative. I understand you need 2 sound cards but since I'm using a gaming laptop I...
  16. RCHeliguy

    Mobile Driving/Flying Cockpit with Motion and Tactile ( Build )

    Table of Contents: https://www.racedepartment.com/threads/mobile-driving-flying-cockpit-with-motion-and-tactile-build.165289/post-3489238 It was suggested that I created a dedicated thread for this build so it wouldn't be buried in another thread and because it might be of use to others. I had...
  17. Piero Favretti

    Tactile Transducers (shaker) Setup

    Hello everyone I have 2 AuraSound AST-2B-4 Pro Bass Shakers I would like to use with an older Yamaha (RX-V595, 70 w/channel) receiver. The AuraSound will be mounted rear-right and rear-left, I will eventually add 2 more of these shakers front-right and front-left. I am looking for clear...
  18. J

    Tactile Immersion - Mounting transducers for Chassis Mode

    Hi all, I've been reading through the excellent posts in this forum regarding tactile immersion and am experimenting with how to mount them to my 80/20 rig. Goal: I'm looking for input on how I currently have them mounted and I welcome suggestions on different mounting methods. I want to get...
  19. MartyK

    NEED HELP! - Tactile Transducer PS4 Settings

    I'm newish to SimRacing and have had a race seat setup for a while. I'm on PS4, and have just added two tactile transducers to the bottom of my playseat, but they're not working perfectly. I have them wired to a 2 channel amp Behringer iNuke 1000 with 1 transducer in each channel. When I start...
  20. Ceolmor

    Getting into Tactile Immersion - Help please?

    Noob enquiry here from someone seeking guidance from others who are prepared to share their experiences of tactile immersion. I have a good 80/20 rig with a fibreglass racing bucket seat. I am getting good ffb from my wheel, but I am looking to dip my toes (or backside) into the world of...

Latest News

What are you planning to upgrade this Black friday?

  • PC

  • PC Hardware (ram, gpu etc)

  • More games (sims)

  • Wheel

  • Shifter

  • Brake pedals

  • Wheel, shifter and brake in bundle

  • Rig

  • Something else?


Results are only viewable after voting.
Back
Top