Hi all guys... I remember that some time ago I used a keys combo to have an interface which showed more informations on how the car's going than the "LCD" widget shows at bottom right.
But, I forgot how to do that and how did I discovered that, does somebody knows it?
Meanwhile I discovered that...
So I've been trying to determine what my suspension was doing in AC (RSS FH 2023 car) and was recording a ton of telemetry laps using ACTI. As I could see very little difference in the suspension travel traces in Motec, I decided to go extreme with a setup that should be a 'night and day'...
https://www.desmos.com/calculator/i0pfyfefyh
V2:
https://www.desmos.com/calculator/jhidoqlu7s
Just a Desmos visualizer to help people having difficulty visualizing what bumpstops/packers/rod_length etc all mean in AC. Suggestions welcome.
This Sim Hub Telemetry Dashboard includes Gear Change, Throttle/Brake, Steering Angle, and Suspension Travel of all four corners.
Steering angle has a strange value because that was the only way I could get a left turn to be a positive number, and right a negative number. And that is the format...
Hey Guys,
I'd like to reproduce the rear multilink suspension of my IRL BMW. I roughly measured it's pieces but i don't know how to put things into the suspension.ini because obv. this has more/different parts than DWB.
I know DWB is roughly correct but i'm curious how the car would feel done...
I understand it has something to do with the GUID text file in the sound folder but I've tried copying the event:/ and vca:/ from a car that does have that body roll sound to a car that doesn't but nothing happens. Any idea how to add that shake sound to any car? Does it have to do with the...
Hello everyone!
Help with advice, please.
I can not set the initial position of the rear suspension. The rebound travel should be 30mm. It turned out 21.xx and I just can't change it.
Initial data:
Total stroke: 75mm
Compression: 45mm
Rebound: 30mm.
The suspensions.ini contains:
...
What does adjusting the "ride height" do? Does it deflect the spring and damper more or less, or does it "attach the suspension lower or higher"? Do the arm angles change when adjusting ride height? Why does the wheel orientation not change?
Where is ride height referenced from? If I have it 0...
I've looked around for something similar, but I've only found people having similar issues with tracks. I'm trying to animate the rear suspension of a RTR mustang, and everything works properly until I try adding the skin onto the spring to make it "compress". I followed the video x4fab posted a...
I want to soften the front anti roll bar on the formula 2 car but there's option for inner and outer. What's the difference?
p.s. I know nowt about setups
App
The app show on screen real time telemetry of engine, each tire and suspension individually. The goal with this app is not to replace the Assetto Corsa built-in apps with these information, but to help developing better setups more efficiently.
The app uses the mod file directly or the...
Hello!
Do you have a problem running the mod? Please post information HERE! Dont leave it as a review.
Make sure you OWN the game on steam. I am not supporting pirated games.
Game Versions: Stable (4393001/15.11.2019) Working.
MSCLoader Versions: (1.1.4) Working.
This project is no longer...
This is my first attempt to create a simhub dashboard, and I featured "momentary tyre temperature-like" information with Project CARS 2. The parameter "Tire Temperature middle" shows some kind of behavior like "melting tyre surface", however, it's maybe not what it should be referenced for...
I always tend to dial out rear toe-in.
Though it's there to allow more stability under braking and to aid in tracking out of corners, I always suffer with a perceived instability.
I spent most of my life driving first karts...then rear engined, rear-wheel drive cars.
I tend to love over-steer...
Hello guys, I wonder if someone can help me...
I'm trying to adjust the suspension to one more stiff aka more hard suspension ready for track.
The car is a Mazda Miata Mk1... The suspension is too soft and then this happens:
Can someone help me to tweak the suspension? Another thing, it's...
I know how to do the rough suspension but how do you change a suspension to a live axle?
I know that it has to do sth with this:
[REAR]
TYPE=DWB
, but can you just change it to a live axle or are there things I have to look out for?
And what would I have to write instead of DWB?
800 downloads? What the **** is wrong with you people. Go download satsuma estate or some ****.
This mod changes the textures of the Satsuma parts and the underside of the actual car. I haven't used any solid colours, none of the parts are meant to nor actually look perfect, although all rust...
Hello well I'm a fanboy of Nissan Skyline R34, not so long ago i decided to create Z-tune version of that car,
i found real data of that version, the engine specs etc...
so I changed engine power, changed the tyre size, then i encountered problem with tyre temperature rising like hell under...
This mod is outdated. Use SatsumaTuner95 instead: https://www.racedepartment.com/downloads/satsumatuner95.46996/
SatsumaTuner 0.23
by: ajanhallinta
Changelog:
0.23 - Changed routine to find Satsuma, the mod shouldn't break anymore even if the game gets updated.
0.22 - Added Rear Suspension Fix...