deadzone
-
D
CSW 2.5 "Notchy" feeling in centre of steering range
Hi, Was searching for another issue (and found someone with said issue here and posted that I was experiencing the same - CSW 2.5 Oscillation thread ) and figured I'd make a seperate post for something else I experience only in AC/ACC. In addition to that other thread, I have this strange...- d1s1nformat1on
- Thread
- clunking deadzone fanatec csw v2.5 wheel
- Replies: 4
- Forum: Assetto Corsa Competizione
-
I need some pedal deadzone
I need just a tiny bit of deadzone on my throttle and brake pedals. Played around with Filter Settings but did not work. Or I couldn't get it to work. Help please- H9327
- Thread
- deadzone pedal
- Replies: 3
- Forum: Richard Burns Rally
-
O
Thrustmaster T3PA pedals deadzones
Hi, i bought used T3PA pedals and all three pedals have the same probem - deadzones at both idle and fully pressed positions. When i press pedal, it goes about 10-15mm before corresponing axis at the control panel or in game begin to move, and it reaches 100% before 10-15mm of fully pressed...- ojhn
- Thread
- deadzone t3pa thrustmaster
- Replies: 8
- Forum: Sim Racing Hardware
-
M
Bad deadzone on G27
On straight lines, the wheel is just dead, I get no information about the asphalt, no vibration at all so it feels as if im floating. Only when im going really fast when the camera sharts shaking I get some input, but the first 3 gears on the ASR Mclaren MP4 for example that I just tried on... -
RasmusP's LUTs for G27/29 and DFGT 2.0
Hi, time for an updated post! Now a bit simpler: 1. Inside the downloaded folder, you'll find screenshots for the settings and a txt-file with explanations 2. Drag&Drop the LUT you want to use. I recommend the RealNew80LUT to try first for everything apart from the DFGT 3. Set the gain in CM... -
Guide for G27 (and other wheels) configuration
February 2024 Update: Please don't read this thread. I know Google will show it, but it's old and filled with partly wrong information from me. Just use my LUT package instead: http://www.racedepartment.com/downloads/rasmusps-lut-guide-for-g27-29-and-dfgt.16799/ -------------- Don't read...- RasmusP
- Thread
- assetto corsa center_boost damper deadzone g27 gyro lookup table lut settings wheelcheck
- Replies: 282
- Forum: Assetto Corsa
-
U
Logitech G27 - Clutch Deadzone
Since I've started driving more cars with h-boxes recently, it quickly became apparent that my G27's clutch has a rather large deadzone. I need to push the pedal at least 1/5th of the way down before it registers any input at all, which is rubbish. The trouble is that for whatever reason, the...- UMC 22
- Thread
- clutch deadzone logitech g27
- Replies: 3
- Forum: Sim Racing Hardware
-
S
T3PA brake pedal deadzone
Just upgraded from a logitech G25 to the t300 alcantara edition with the T3PA pedals and one of the things I have noticed is the deadzone on the brake pedal. The thrustmaster software doesn't register any brake pedal movement until after I get on the conical brake mod. This is really bugging me...- Sfrost
- Thread
- brake conical deadzone t300 thrustmaster
- Replies: 3
- Forum: Sim Racing Hardware