Steering Wheel Showdown: Which Wheel Would You Like A Sim Racing Version Of?

Ferrari-499P-Steering-Wheel.jpg
Image: Ferrari
Sim racers have plenty of choice when it comes to hardware. There are a number of cool steering wheels out there that are not yet available for sim racing - so we'll have a tournament-style vote to find out which one would be our community's favorite.

We recently put together a list of licensed sim racing steering wheels, of which there are quite a lot available. Anything from entry-level rims to high-end ones that are essentially just yanked straight out of actual race cars and equipped with a USB connection to work on your PC.

Several wheels of Ferrari, BMW or Porsche race cars can be had for your home sim setup, but there are just as many cool racing machines as there are wheels that are not available for sim racing yet out there. So we assembled 16 of them to have ourselves a little tournament over on the OverTake Instagram profile!

To kick off the tournament, we will have a new set of match-ups every day at 17:00 UTC in an Instagram story. There, you can pick your favorite via the voting widget to help the wheel of your choice advance to the next round. Once the round of 16 has concluded, we will move on to a quarterfinal, then semifinal and, naturally, the final match-up to determine the winner.

The Candidates​

  • Ferrari 499P
  • Hyundai Elantra N TCR
  • Glickenhaus SCG 007 LMH
  • Ferrari 296 GT3
  • Toyota GR Yaris WRC
  • Audi RS 3 LMS
  • Garage 56 Chevrolet Camaro ZL1
  • VT23r Subaru WRX ARA24
  • KTM X-BOW GT-XR
  • Lamborghini Sesto Elemento
  • Peugeot 9X8 Hypercar
  • Aston Martin Valkyrie
  • Porsche GT3 RS
  • Pagani Zonda R
  • Mercedes-AMG Project ONE
  • Lotus Evija

10_2024_OVT_Tournament_Bracket 1.png


Your favorite wheel that is not yet available for sim racing is not in our tournament? Let us know which one you would like to see on a sim rig in the comments below!
About author
Yannik Haustein
Lifelong motorsport enthusiast and sim racing aficionado, walking racing history encyclopedia.

Sim racing editor, streamer and one half of the SimRacing Buddies podcast (warning, German!).

Heel & Toe Gang 4 life :D

Comments

I'd love to have a small round standalone wheel for old f1. Just a few button for menu navigation. Something like early 90s f1 wheel.
Thats not too complicate or even expensive to put together though.. you can get momo, personal brand replicas, add the quick release needed. The buttons - single or dual etc are a bit more work but very doable
 
Last edited:

Attachments

  • 20240601_123620.jpg
    20240601_123620.jpg
    452.5 KB · Views: 6
A GT3 wheel with 10 buttons, 2 thumb wheels, 2 funky switches, 3 rotary knobs. fits Fanatec DD2 without a cable or spacer, doesn't light up, doesn't have a LCD, doesn't have any car manufaturer's name on it and is 320mm. I have a 6.8 inch DDU. I don't look at the steering wheel.

Please get right on that Corsair.
 
Now that Thrustmaster finally has come into the DD era, they only need to upscale their 80% diameter Ferrari 250 GTO to a full 1:1 size fit and I'm an instant buyer.

OK, so if the job is a pick from the list I'll take the VT23r Subaru WRX ARA24 racing wheel.

So simple, yet beautiful design and right amount of buttons for modern cars to my taste.
 

Latest News

Article information

Author
Yannik Haustein
Article read time
2 min read
Views
450
Comments
14
Last update

Do you prefer licensed hardware?

  • Yes for me it is vital

  • Yes, but only if it's a manufacturer I like

  • Yes, but only if the price is right

  • No, a generic wheel is fine

  • No, I would be ok with a replica


Results are only viewable after voting.
Back
Top