It's good and much more accurate to a standard 2JZGTE than most sounds. The good parts are the largely accurate engine tone, reasonable sound master, high RPM limit without baked limiter and reasonable technical implementation without popping or noticeably bad loops. So good job.
However I have a few caveats which you should perhaps consider:
I suggest lowering the interior sound of the tire squeal somewhat. It is also productive to apply some effects to it to give a more appropriate impression of the sound originating outside the car. I assume this is WIP as you are using what appear to be KS samples.
The sound of the turbo flutter sample is perhaps too pronounced for standard Toyota CT20As (UK and JDM) or CT12Bs (USDM). While it is true some turbo activation can be heard in a real car sometimes and not have it appear on video, I suggest
https://youtu.be/EtD_0VsNmk4 as a source to judge. Ideally both variants would be supplied but in my opinion there is no need for gimmicks like an overly loud turbo, so I would suggest trying a realistic approach.
Apart from that I cannot really give technical advice, I understand how difficult sound modding is because I have done it myself, so I think this is a fair and good effort. I'll use it myself. If these things are resolved I would be inclined to review my review in the future.
As for suggestions, a standard mild-sounding SR20DET or RB26DETT would be very valuable right now for me personally.
