WARNING : MUST READ
For those asking in the Discussion tab, "why the numberplate for WEC skins won't appear on the CM showroom or livery previews...", I think you just answered your own questions. They. Won't. Work. on. CM. Showrooms. and. Livery. Previews.
The WEC numberplate only appears as part of CSP extension. If you wanna see it, use CSP showroom or just run them in-game.
Here's WEC #5 being shown on CM showroom.
Here's from CM livery preview generator feature.
And here's from CSP showroom, which is the way to load it is by following these simple steps :
If somehow the situation turned out to be like this :
Just update your car mate. This livery pack will no longer works with the V1 version of the mod.
Have I made myself clear, Corporal?
Update :
There is a minor oversight on the #5 carbon, I forgot to change the driver to 'Sebastian Vettel'.
This is not a big problem and you can manually change it by yourselves in the skin section. Just wanted to point that out.
Here we go again. This will be the last update of the pack as I need to move to other projects unless there's another silent update come out of nowhere that breaks everything.
WARNING : DELETE PREVIOUS VERSION OF THE LIVERY PACK FROM YOUR SKIN FOLDER BEFORE REINSTALLING!
ADDITIONS & FIXES :
- Replaced the misaligned EXT_HR2_NM & Enduro_NM files with the new ones in accordance to update V2-D (all skins)
Before
After
- Recolor the inside of the sideview mirrors to red (LM #4)
- Replaced Estre's helmet to Lotterer's helmet (LM #6)
- Updated the livery preview images (all skins)
- Added carbon version of WEC #5 & IMSA #6 liveries as bonuses cuz I love you all.
The #5 is driven by Sebastian Vettel, complete with his helmet from 2024 Aragon test, courtesy of @Adrien Vowles (also for the aforementioned Lotterer's 2024 Le Mans helmet). No custom driver suit & gloves for him though and I cba to create one from scratch even if it's a simple white suit that matched his helmet design.
On second thought, I actually don't trust most end users much to properly do what I said in the last update, so here we go wasting 10 mins repackaging and uploading the whole thing again.
- Added new Porsche emblem add-on KN5 file from @BIG YOSHIKI (all cars)
- Added few lines in ext_config.ini files in correspondence to the aforementioned add-on file (all cars)
Never a dull moment with this mod, indeed.
I hope this is going to be the last one or I'll lose my mind.
WARNING : REMOVE THE PREVIOUS VERSION OF THE PACK FROM YOUR SKIN FOLDER BEFORE REINSTALLING!
ADDITIONS & FIXES :
- Fixed alpha channel on the chassis textures to fit new body (all skins)
- Fixed alpha channel on the EXT_HRN_NM file (#6 WEC)
- Added EXT_HR2_NM files (all WEC & LM skins)
Before
After
Make sure to also download the updated Porsche emblem add-on from @BIG YOSHIKI which you can get here :
(we rolled out our respectives updates at the same time and I cba to repackage the whole thing again)Protech P96 V8 Emblem Add-on
This is an add-on of the actual brand badge for the Protech P96 V8. This is an add-on for skin files, so it can be used with any file. Note: The emblem object, position, and ext_config.ini contents have changed due to the version upgrade, so...www.overtake.gg
Was too focused on the main HR map that the other HR file also changed. The WEC cars were fine.
FIXES :
- Renamed Enduro_NM.dds files to EXT_HR2_NM.dds (only IMSA skins)
Before
After
MAKE SURE TO DELETE THE EXISTING IMSA SKIN FOLDERS BEFORE REINSTALLING THE NEW ONES!
WARNING : DELETE PREVIOUS VERSION OF THE LIVERY PACK FROM YOUR DRIVE (INCLUDING THE ZIP FILE) BECAUSE IT WILL NO LONGER WORK WITH THE V2 UPDATE OF THE MOD.
Thank goodness I already laid the massive groundwork before the V2 update of the mod was released, there's nothing much that was being changed from the original. Still bummed that there's still spaces open for the Daytona 24 logo but whatever.
ADDITIONS & FIXES :
- Renamed EXT_HR.dds file to EXT_HRN.dds
- Added normal map file to complement EXT_HRN (EXT_HRN_NM.dds)
I have checked everything and they all now work properly (colored roof fins, left side mirror logo, etc.), that being said I won't update the livery previews anymore. I'll left it to you as end users cuz it's unnecessary work that cost way too much time for me to do for this particular mod.
Pretty self-explanatory.
Just drop the #5 WEC folder inside the ZIP into the skin folder of the mod, overwrite when prompted.
Before :
After
Thanks to @UNHAPPY for pointing it out.
Looks like that promised major update for the car never arrived (probably until next year, I reckon) so I decide to roll this one out because the liveries are popping out on the social media and it kinda bugged me that I could immediately recognize them for the wrong reason.
Retaking the livery previews via CSP showroom is 5x longer than just using the CM preview generator with one click, it's not even funny.
DELETE PREVIOUS VERSION OF THE PACK ON YOUR SKIN FOLDER BEFORE REINSTALLING!!!
- New texture coating map to make the livery doesn't look like super polished (All skins)
Trust me this looks better on track compared to showroom.
- Added Rolex 24 logo on Daytona skins
This is temporary until the actual update with the Rolex logo placement in the HR file has been released, hence the very low resolution ahh looking logo.
Thank you to @Raphael Rodrigues for allowing me to use this before it's released for the next helmet pack!
- Replaced Nasr helmet to the current 2024 design. (Le Mans #4 & both IMSA #7) [ACSPRH V1 mod is required!]
I cannot believe that this was on my notes and somehow I forget it.
- Replaced Mobil 1 logos on the front with MOTUL (all IMSA skins)
WARNING : DELETE PREVIOUS VERSION OF THE PACK ON YOUR SKIN FOLDER BEFORE REINSTALLING THIS PACK!
Version 1.0 release is finally here!
I initially wanted to hold on this until the car itself got the major update RSS has promised to release but it seems like it's not coming any time soon so here we are.
Unlike previous major update where I was very limited on the time before Le Mans which caused a little bit of oversight on the skins, this time I have a lot more days to check for any of the misses that had occured and fix them properly.
NEW :
- Two pairs of IMSA variants (#6 & #7). Included are the base, IMSA Sprint variant with two-driver lineup and the 2024 Rolex 24 Hours at Daytona variant with four-driver lineup.
- New custom driver suits, very basic design but it should capture the vibes enough.
- Added custom helmets to all skins [REQUIRES ACSPRH V1 MOD TO USE!!!]
1) Real-life replicas of Felipe Nasr (LM #4, IMSA #7, Daytona #7), Kévin Estre (LM #6, WEC #6, Daytona #6), and Michael Christensen (LM #5, WEC #5).
2) A more generic design Bell helmet on the livery that don't have it (IMSA #6).
UPDATES/FIXES :
- Colored roof fins (all cars) and red mirrors (Le Mans #4)
- Added few more logos on the pitcrew suits (all cars)
- Fixed the Mobil 1 logos on the air intake (Le Mans #6)
- Replaced the default RSS fuel cap texture with real Stäubli logo (all cars)
- Replaced Hoksu's Puma Avanti gloves with Puma SLW GT7 gloves from Random Finn, which you can find them here for the complete pack :
- Removed unnecessary files that don't workPuma SLW GT7 Racing Gloves Pack
Puma SLW GT7 Racing Gloves Pack 3.0.0 By: Random Finn A first of its kind on Assetto Corsa; introducing the new Puma SLW GT7 Racing Gloves. Reference Photos and in-game Customer and Formula 1 Variant Photos are included below. Includes: Variant...www.overtake.gg
Don't worry, IMSA livery is already in the works but I'm waiting for RSS to make updates for the car, those should be up this weekend and I expect the livery pack to be updated before the IMSA 6H race at the Glen.
(Note : the Porsche taillights badge is not updated yet here, that'll arrive at the same time as the IMSA release. For now you can add the updated badge manually.)
- Added pit textures & pitcrew uniforms.
- Enlarged the TAG Heuer logos on the front bumper.
sigh
This website deadass didn't notify me when the upload process has not completed yet. Absolutely brilliant.
The new ZIP file should be there now.
HAPPY LE MANS RACE DAY!
Thank god I managed to finish this mere hours before the race started. I initially don't want to complete this until after LM but seeing that there's not that many adjustments for the LM variants, I decide to make them anyway today.
- Added three Le Mans liveries, complete with the #4, addition of Turbo 50 logo (and WEC logo for the #5 & #6) on the sidepods, gold Mobil 1 decal stickers, "Racing for Charity" text on the wheel arch and numberplate backlights for all three skins.
- Added custom INT_HR1.dds file for all cars
- Painted this bit on the roof to white