This patch brings power, weight and aerodynamic updates for Reiza´s "F-Ultimate" series, according to the 2020 season.
It´s designed for using combined together with Jose46´s "F1Fanatic FUltimate-SKINS2020 V.1.3".
Almost all physics modifications are made using real and simulated reference data (see READ ME.txt).
All cars have the same performance.
---------------------------------------------------------------------------------------------------------------------
V1.2
- Maximum power lowered to 990 hp due to banning of party mode.
- Weight distribution according to 2020 rules. From 45,5%/54,5% (Front/Rear) to 46,5%/53,5% (Front/Rear) in steps of 0,5 kg.
- Increased fuel capacity from 105 kg to 110 kg (135 to 142 lts), according to 2020 rules, and keeping Reiza´s fuel density.
- DRS drag reduced by 25% when active, according to FIA references for the 2019 rear wing changes.
- Downforce reduction and aero-balance changes in the follower car produced by wake effects (dirty air), are reduced by 50%, allowing for a better use of draft and encouraging more wheel-to-wheel battles. The car in the draft zone now will find it easier to follow the leading car.
- The wake width is reduced by 30% due to the 2019 front wing design changes (which notably reduce the outwash effect).
- Suspension and differential default setups are slightly adjusted for better handling.
NOTE: The installing procedure is the same as V1.0. If you´ve already installed V1.0 or V1.1, just allow to overwrite.
---------------------------------------------------------------------------------------------------------------------
V1.1
Aerodynamic and power updates:
- Power (and torque) is raised in the low rpm range to keep the engine characteristic curve.
- Aerodynamic changes according to the 2019-2020 aero rules, based of CFD analysis made by jjn, Vyssion & Vanja - f1technical.net (see "READ ME.txt" file for further reference).
This includes:
- 1.2% more front wing base drag.
- 11.5% more front wing base lift.
- 9% more rear wing base drag.
- 12.5% more rear wing base lift.
- 8% less body base-drag.
- Double rolling moment in curves.
- 20% less body base-lift.
- The Halo ON/OFF upgrade is not available anymore (mandatory as in real-life).
NOTE: The installing procedure is the same as V1.0. If you´ve already installed V1.0, just allow to overwrite.
---------------------------------------------------------------------------------------------------------------------
V1.0
This simple patch adds some more realism to Jose46´s wonderful 2020 skinpack, rising power up to 1000 hp and minimum weight up to 746 kg, better matching with the 2020 grid. These modifications goes for all teams and nothing else is modified.
It consists of a new upgrade file, and all the original .veh files modified only in the corresponding upgrade line.
All credits for the .veh files and the "Formula Ultimate Skins 2020" skinpack go to Jose46.
1. Download & install Jose46´s skinpack from: https://www.racedepartment.com/downloads/formula-ultimate-skins-2020.31301/
2. Back up all skinpack .veh files.
3. Download & install this patch, replacing the skinpack .veh files.
4. Enjoy!
It´s designed for using combined together with Jose46´s "F1Fanatic FUltimate-SKINS2020 V.1.3".
Almost all physics modifications are made using real and simulated reference data (see READ ME.txt).
All cars have the same performance.
---------------------------------------------------------------------------------------------------------------------
V1.2
- Maximum power lowered to 990 hp due to banning of party mode.
- Weight distribution according to 2020 rules. From 45,5%/54,5% (Front/Rear) to 46,5%/53,5% (Front/Rear) in steps of 0,5 kg.
- Increased fuel capacity from 105 kg to 110 kg (135 to 142 lts), according to 2020 rules, and keeping Reiza´s fuel density.
- DRS drag reduced by 25% when active, according to FIA references for the 2019 rear wing changes.
- Downforce reduction and aero-balance changes in the follower car produced by wake effects (dirty air), are reduced by 50%, allowing for a better use of draft and encouraging more wheel-to-wheel battles. The car in the draft zone now will find it easier to follow the leading car.
- The wake width is reduced by 30% due to the 2019 front wing design changes (which notably reduce the outwash effect).
- Suspension and differential default setups are slightly adjusted for better handling.
NOTE: The installing procedure is the same as V1.0. If you´ve already installed V1.0 or V1.1, just allow to overwrite.
---------------------------------------------------------------------------------------------------------------------
V1.1
Aerodynamic and power updates:
- Power (and torque) is raised in the low rpm range to keep the engine characteristic curve.
- Aerodynamic changes according to the 2019-2020 aero rules, based of CFD analysis made by jjn, Vyssion & Vanja - f1technical.net (see "READ ME.txt" file for further reference).
This includes:
- 1.2% more front wing base drag.
- 11.5% more front wing base lift.
- 9% more rear wing base drag.
- 12.5% more rear wing base lift.
- 8% less body base-drag.
- Double rolling moment in curves.
- 20% less body base-lift.
- The Halo ON/OFF upgrade is not available anymore (mandatory as in real-life).
NOTE: The installing procedure is the same as V1.0. If you´ve already installed V1.0, just allow to overwrite.
---------------------------------------------------------------------------------------------------------------------
V1.0
This simple patch adds some more realism to Jose46´s wonderful 2020 skinpack, rising power up to 1000 hp and minimum weight up to 746 kg, better matching with the 2020 grid. These modifications goes for all teams and nothing else is modified.
It consists of a new upgrade file, and all the original .veh files modified only in the corresponding upgrade line.
All credits for the .veh files and the "Formula Ultimate Skins 2020" skinpack go to Jose46.
1. Download & install Jose46´s skinpack from: https://www.racedepartment.com/downloads/formula-ultimate-skins-2020.31301/
2. Back up all skinpack .veh files.
3. Download & install this patch, replacing the skinpack .veh files.
4. Enjoy!
