Resource icon

F1 24 tyres in F1 23 0.3

Login or Register an account to download this content
Overview Updates (2) Reviews (6) History Discussion
Ask a question
Reviews (6) History

Tyre wear fixes and Pressure Sim changes

So, last time I posted this, I changed a few values to increase the tyre wear, though it didn't actually increase that much. So, as I went back now, I discovered that I'm actually stupid and tyre wear rates are also controlled by some values in Pressure Simulation... And those were not changed. Which meant that on track the tyre wear was still minimal. LOL. The more you learn I guess.

  • Actually fixed the tyre wear - the wear rate from original file is increased by 4x still.
    Now the tyre wear is actually noticeable on track.
    Tyre wear rates are somewhat close to original F1 23 values, so simulated tyre life in the garage monitor will be somewhat accurate now.
  • Changed PressureMin and PressureMax values to F1 23 values.
    Since the way pressures work in F1 23 is different, I returned the values from original F1 23 tyre compound file. Temperatures, from initial testing, seemed to work better and it's possible to overheat the tyres if the pressures are not set well.

Current tracked issues:
  • AI are untrained for these tyres, so you will have to use higher difficulty level. Seems that AI cannot adapt to these tyres well. I may try a few more options to potentially fix this.
  • Tyre wear might be unbalanced - from testing, rear tyres seem to be wearing out at twice the rate of front tyres. More testing is required; if this is confirmed, I will tweak the tyre wear rates to try and balance it out.
  • Tyre Temps - need monitoring to check whether balance can be achieved. More testing required.

Update 0.2

Not a very big patch - worked a bit on tyrewear. I increased all tyre wear values by 4x. Should improve tyre wear on track at least.
Keep in mind that I have noticed that rear tyres were wearing out more - maybe something to look out for.
On a separate note, I tried adjusting the temperature values for at least some of the tyres but I was not satisfied, so I left the previous (current) ones.

Latest News

Shifting method

  • I use whatever the car has in real life*

  • I always use paddleshift

  • I always use sequential

  • I always use H-shifter

  • Something else, please explain

Results are only viewable after voting.
See comments…
Back
Top